{"title":"ACS Products","description":"\u003cp\u003eShop ACS Products — genuine ACS Products parts and products for your aircraft, delivered across the UK and Europe.\u003c\/p\u003e","products":[{"product_id":"08-17079","title":"ACS Ignition Harness Lyc-O-540, Slick Mags","description":"\u003cp\u003eNote: 12304-32 1 Mag Cap with 4 Leads per order (see Image 1). 12304-33 and 123404-31 are sold as a set, 2 mag caps with leads. Will fit 5\/8\" spark plugs only. Ignition harnesses late type 5MM wire constructed of 16 strands of tightly braided copper wire impregnated with scuff resistant white silicone. All strands must fracture before a complete open circuit type failure occurs thus extending lead life. Lead flexibility is retained from -65° to 400°F. Moisture \u0026amp; cleaning solvent penetration is eliminated by the impregnated silicone coating. This extremely flexible wire lends itself to sharp bends thereby eliminating the need for old style harness elbows. No soldered joints in the grounding circuit. Custom made for most 4 \u0026amp; 6 cylinder engines using Bendix or Eisemann magnetos and 4 cylinder engines using Slick magnetos.Cable outlet plates are not furnished for Bendix \u0026amp; Eisemann mags as these are already installed on the magnetos in service. They must be purchased separately for new magneto installations. Harnesses for Slick magnetos are furnished with the backplates installed. Standard harnesses for the Bendix S4\/S6 mags are fitted with a male nut which screws into the threaded outlet plate on the back of the mag. Harnesses for old style Bendix SF4 and SF6 magnetos are fitted with female nuts.ACS Products ignition harnesses can be used on experimental aircraft or on certified aircraft with field approval (FAA Form 337). If FAA\/PMA harness is mandatory or if for use with 3\/4\" spark plugs, use Slick Bendix, Aero-Lite or Champion harnesses.Made in USA\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eManufacturer Part #:\u003c\/strong\u003e 12304-34\u003c\/p\u003e","brand":"ACS Products","offers":[{"title":"Default Title","offer_id":54254411972950,"sku":"08-17079","price":386.4,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1037\/0164\/3606\/files\/12304-33.jpg?v=1781862924"},{"product_id":"08-17286","title":"Shielded Ignition Harness 12304-32","description":"\u003cp\u003eNote: 12304-32 1 Mag Cap with 4 Leads per order (see Image 1). 12304-33 and 123404-31 are sold as a set, 2 mag caps with leads. Will fit 5\/8\" spark plugs only. Ignition harnesses late type 5MM wire constructed of 16 strands of tightly braided copper wire impregnated with scuff resistant white silicone. All strands must fracture before a complete open circuit type failure occurs thus extending lead life. Lead flexibility is retained from -65° to 400°F. Moisture \u0026amp; cleaning solvent penetration is eliminated by the impregnated silicone coating. This extremely flexible wire lends itself to sharp bends thereby eliminating the need for old style harness elbows. No soldered joints in the grounding circuit. Custom made for most 4 \u0026amp; 6 cylinder engines using Bendix or Eisemann magnetos and 4 cylinder engines using Slick magnetos.Cable outlet plates are not furnished for Bendix \u0026amp; Eisemann mags as these are already installed on the magnetos in service. They must be purchased separately for new magneto installations. Harnesses for Slick magnetos are furnished with the backplates installed. Standard harnesses for the Bendix S4\/S6 mags are fitted with a male nut which screws into the threaded outlet plate on the back of the mag. Harnesses for old style Bendix SF4 and SF6 magnetos are fitted with female nuts.ACS Products ignition harnesses can be used on experimental aircraft or on certified aircraft with field approval (FAA Form 337). If FAA\/PMA harness is mandatory or if for use with 3\/4\" spark plugs, use Slick Bendix, Aero-Lite or Champion harnesses.Made in USA\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eManufacturer Part #:\u003c\/strong\u003e 12304-32\u003c\/p\u003e","brand":"ACS Products","offers":[{"title":"Default Title","offer_id":54254423834966,"sku":"08-17286","price":279.79,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1037\/0164\/3606\/files\/12304-33_f3da1f27-3cfc-4246-9417-843d7c0dc45d.jpg?v=1781863024"},{"product_id":"08-17287","title":"Shielded Ignition Harness 12304-33","description":"\u003cp\u003eNote: 12304-32 1 Mag Cap with 4 Leads per order (see Image 1). 12304-33 and 123404-31 are sold as a set, 2 mag caps with leads. Will fit 5\/8\" spark plugs only. Ignition harnesses late type 5MM wire constructed of 16 strands of tightly braided copper wire impregnated with scuff resistant white silicone. All strands must fracture before a complete open circuit type failure occurs thus extending lead life. Lead flexibility is retained from -65° to 400°F. Moisture \u0026amp; cleaning solvent penetration is eliminated by the impregnated silicone coating. This extremely flexible wire lends itself to sharp bends thereby eliminating the need for old style harness elbows. No soldered joints in the grounding circuit. Custom made for most 4 \u0026amp; 6 cylinder engines using Bendix or Eisemann magnetos and 4 cylinder engines using Slick magnetos.Cable outlet plates are not furnished for Bendix \u0026amp; Eisemann mags as these are already installed on the magnetos in service. They must be purchased separately for new magneto installations. Harnesses for Slick magnetos are furnished with the backplates installed. Standard harnesses for the Bendix S4\/S6 mags are fitted with a male nut which screws into the threaded outlet plate on the back of the mag. Harnesses for old style Bendix SF4 and SF6 magnetos are fitted with female nuts.ACS Products ignition harnesses can be used on experimental aircraft or on certified aircraft with field approval (FAA Form 337). If FAA\/PMA harness is mandatory or if for use with 3\/4\" spark plugs, use Slick Bendix, Aero-Lite or Champion harnesses.Made in USA\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eManufacturer Part #:\u003c\/strong\u003e 12304-33\u003c\/p\u003e","brand":"ACS Products","offers":[{"title":"Default Title","offer_id":54254424523094,"sku":"08-17287","price":279.79,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1037\/0164\/3606\/files\/12304-33_ab141a64-fba9-4843-8ead-16f656f659da.jpg?v=1781863029"},{"product_id":"08-17285","title":"Shielded Ignition Harness # 12304-31","description":"\u003cp\u003eNote: 12304-32 1 Mag Cap with 4 Leads per order (see Image 1). 12304-33 and 123404-31 are sold as a set, 2 mag caps with leads. Will fit 5\/8\" spark plugs only. Ignition harnesses late type 5MM wire constructed of 16 strands of tightly braided copper wire impregnated with scuff resistant white silicone. All strands must fracture before a complete open circuit type failure occurs thus extending lead life. Lead flexibility is retained from -65° to 400°F. Moisture \u0026amp; cleaning solvent penetration is eliminated by the impregnated silicone coating. This extremely flexible wire lends itself to sharp bends thereby eliminating the need for old style harness elbows. No soldered joints in the grounding circuit. Custom made for most 4 \u0026amp; 6 cylinder engines using Bendix or Eisemann magnetos and 4 cylinder engines using Slick magnetos.Cable outlet plates are not furnished for Bendix \u0026amp; Eisemann mags as these are already installed on the magnetos in service. They must be purchased separately for new magneto installations. Harnesses for Slick magnetos are furnished with the backplates installed. Standard harnesses for the Bendix S4\/S6 mags are fitted with a male nut which screws into the threaded outlet plate on the back of the mag. Harnesses for old style Bendix SF4 and SF6 magnetos are fitted with female nuts.ACS Products ignition harnesses can be used on experimental aircraft or on certified aircraft with field approval (FAA Form 337). If FAA\/PMA harness is mandatory or if for use with 3\/4\" spark plugs, use Slick Bendix, Aero-Lite or Champion harnesses.Made in USA\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eManufacturer Part #:\u003c\/strong\u003e 12304-31\u003c\/p\u003e","brand":"ACS Products","offers":[{"title":"Default Title","offer_id":54254424654166,"sku":"08-17285","price":292.6,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1037\/0164\/3606\/files\/12304-33_dab11dbb-33d8-4231-92e6-0e921cf149f1.jpg?v=1781863029"},{"product_id":"10-00012","title":"Tachometer Cable 46 Left Lay","description":"\u003cp\u003eNote: General rule for installation: Tach cable should be installed as straight as possible - the inner cable length will decrease 11\/16\" per 360 degrees of bends.1. Select the proper length from the listing, but measure old tach cable to verify length in chart is correct for your aircraft, as tach cables can vary from aircraft to aircraft. Over-length cables can cause problems - order one that fits the installation. 2. Measure original cable from end of Ferrule to end of Ferrule when fully extended. 3. Inner tach cables are measured end to end. Inner assemblies have male ends only. One end is squared and the other is keyed. Tach cable assemblies have 7\/8-18 on one end and 5\/8-18 on the other, female nuts only.Note: Custom length tach and inner cables are available. Please contact sales for price and lead time of custom cable. You will be required to provide length and rotation. Additional information of aircraft, engine, make, model \u0026amp; dash number may be required.Note: General rule for installation: Tach cable should be installed as straight as possible - the inner cable length will decrease 11\/16\" per 360 degrees of bends.Available in left and right lay rotation. Add -R to the part number for Right Lay. 1. To determine cable rotation, note the rotation direction of the tach drive socket on the engine while looking directly at the tach drive on the engine. 2. If the drive socket rotates clockwise, a right lay inner cable is required. 3. If the drive socket rotates counter-clockwise, a left lay inner cable is required. 4. The rotation direction of the tach needle does not affect which lay should be used.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eManufacturer Part #:\u003c\/strong\u003e 15510-0460\u003c\/p\u003e","brand":"ACS Products","offers":[{"title":"Default Title","offer_id":54255373353302,"sku":"10-00012","price":128.45,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1037\/0164\/3606\/files\/10-16900c.jpg?v=1781870764"},{"product_id":"10-00012-r","title":"Tachometer Cable 46 Right Lay","description":"\u003cp\u003eNote: General rule for installation: Tach cable should be installed as straight as possible - the inner cable length will decrease 11\/16\" per 360 degrees of bends.1. Select the proper length from the listing, but measure old tach cable to verify length in chart is correct for your aircraft, as tach cables can vary from aircraft to aircraft. Over-length cables can cause problems - order one that fits the installation. 2. Measure original cable from end of Ferrule to end of Ferrule when fully extended. 3. Inner tach cables are measured end to end. Inner assemblies have male ends only. One end is squared and the other is keyed. Tach cable assemblies have 7\/8-18 on one end and 5\/8-18 on the other, female nuts only.Note: Custom length tach and inner cables are available. Please contact sales for price and lead time of custom cable. You will be required to provide length and rotation. Additional information of aircraft, engine, make, model \u0026amp; dash number may be required.Note: General rule for installation: Tach cable should be installed as straight as possible - the inner cable length will decrease 11\/16\" per 360 degrees of bends.Available in left and right lay rotation. Add -R to the part number for Right Lay. 1. To determine cable rotation, note the rotation direction of the tach drive socket on the engine while looking directly at the tach drive on the engine. 2. If the drive socket rotates clockwise, a right lay inner cable is required. 3. If the drive socket rotates counter-clockwise, a left lay inner cable is required. 4. The rotation direction of the tach needle does not affect which lay should be used.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eManufacturer Part #:\u003c\/strong\u003e 15510-0460R\u003c\/p\u003e","brand":"ACS Products","offers":[{"title":"Default Title","offer_id":54255373451606,"sku":"10-00012-R","price":129.85,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1037\/0164\/3606\/files\/10-16900c_d9ac9801-a08d-4b30-8e5a-0e638c610c4f.jpg?v=1781870766"},{"product_id":"10-02675","title":"Tachometer Cable 22 Left Lay","description":"\u003cp\u003eNote: General rule for installation: Tach cable should be installed as straight as possible - the inner cable length will decrease 11\/16\" per 360 degrees of bends.1. Select the proper length from the listing, but measure old tach cable to verify length in chart is correct for your aircraft, as tach cables can vary from aircraft to aircraft. Over-length cables can cause problems - order one that fits the installation. 2. Measure original cable from end of Ferrule to end of Ferrule when fully extended. 3. Inner tach cables are measured end to end. Inner assemblies have male ends only. One end is squared and the other is keyed. Tach cable assemblies have 7\/8-18 on one end and 5\/8-18 on the other, female nuts only.Note: Custom length tach and inner cables are available. Please contact sales for price and lead time of custom cable. You will be required to provide length and rotation. Additional information of aircraft, engine, make, model \u0026amp; dash number may be required.Note: General rule for installation: Tach cable should be installed as straight as possible - the inner cable length will decrease 11\/16\" per 360 degrees of bends.Available in left and right lay rotation. Add -R to the part number for Right Lay. 1. To determine cable rotation, note the rotation direction of the tach drive socket on the engine while looking directly at the tach drive on the engine. 2. If the drive socket rotates clockwise, a right lay inner cable is required. 3. If the drive socket rotates counter-clockwise, a left lay inner cable is required. 4. The rotation direction of the tach needle does not affect which lay should be used.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eManufacturer Part #:\u003c\/strong\u003e 15510-0220\u003c\/p\u003e","brand":"ACS Products","offers":[{"title":"Default Title","offer_id":54255493087574,"sku":"10-02675","price":117.25,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1037\/0164\/3606\/files\/10-16900c_4f4535af-2156-42db-a774-39b3b3d6b09d.jpg?v=1781871878"},{"product_id":"10-02675-r","title":"Tachometer Cable 22 Right Lay","description":"\u003cp\u003eNote: General rule for installation: Tach cable should be installed as straight as possible - the inner cable length will decrease 11\/16\" per 360 degrees of bends.1. Select the proper length from the listing, but measure old tach cable to verify length in chart is correct for your aircraft, as tach cables can vary from aircraft to aircraft. Over-length cables can cause problems - order one that fits the installation. 2. Measure original cable from end of Ferrule to end of Ferrule when fully extended. 3. Inner tach cables are measured end to end. Inner assemblies have male ends only. One end is squared and the other is keyed. Tach cable assemblies have 7\/8-18 on one end and 5\/8-18 on the other, female nuts only.Note: Custom length tach and inner cables are available. Please contact sales for price and lead time of custom cable. You will be required to provide length and rotation. Additional information of aircraft, engine, make, model \u0026amp; dash number may be required.Note: General rule for installation: Tach cable should be installed as straight as possible - the inner cable length will decrease 11\/16\" per 360 degrees of bends.Available in left and right lay rotation. Add -R to the part number for Right Lay. 1. To determine cable rotation, note the rotation direction of the tach drive socket on the engine while looking directly at the tach drive on the engine. 2. If the drive socket rotates clockwise, a right lay inner cable is required. 3. If the drive socket rotates counter-clockwise, a left lay inner cable is required. 4. The rotation direction of the tach needle does not affect which lay should be used.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eManufacturer Part #:\u003c\/strong\u003e 15510-0220R\u003c\/p\u003e","brand":"ACS Products","offers":[{"title":"Default Title","offer_id":54255493120342,"sku":"10-02675-R","price":117.25,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1037\/0164\/3606\/files\/10-16900c_788b66ad-f19e-407d-bf95-828121058c88.jpg?v=1781871879"},{"product_id":"10-03362","title":"Tachometer Cable 60 Left Lay","description":"\u003cp\u003eNote: General rule for installation: Tach cable should be installed as straight as possible - the inner cable length will decrease 11\/16\" per 360 degrees of bends.1. Select the proper length from the listing, but measure old tach cable to verify length in chart is correct for your aircraft, as tach cables can vary from aircraft to aircraft. Over-length cables can cause problems - order one that fits the installation. 2. Measure original cable from end of Ferrule to end of Ferrule when fully extended. 3. Inner tach cables are measured end to end. Inner assemblies have male ends only. One end is squared and the other is keyed. Tach cable assemblies have 7\/8-18 on one end and 5\/8-18 on the other, female nuts only.Note: Custom length tach and inner cables are available. Please contact sales for price and lead time of custom cable. You will be required to provide length and rotation. Additional information of aircraft, engine, make, model \u0026amp; dash number may be required.Note: General rule for installation: Tach cable should be installed as straight as possible - the inner cable length will decrease 11\/16\" per 360 degrees of bends.Available in left and right lay rotation. Add -R to the part number for Right Lay. 1. To determine cable rotation, note the rotation direction of the tach drive socket on the engine while looking directly at the tach drive on the engine. 2. If the drive socket rotates clockwise, a right lay inner cable is required. 3. If the drive socket rotates counter-clockwise, a left lay inner cable is required. 4. The rotation direction of the tach needle does not affect which lay should be used.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eManufacturer Part #:\u003c\/strong\u003e 15510-0600\u003c\/p\u003e","brand":"ACS Products","offers":[{"title":"Default Title","offer_id":54255514911062,"sku":"10-03362","price":136.85,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1037\/0164\/3606\/files\/10-16900c_d3ad2c86-d9ea-4904-a336-d9671c1b0bfe.jpg?v=1781872217"},{"product_id":"10-03362-r","title":"Tachometer Cable 60 Right Lay","description":"\u003cp\u003eNote: General rule for installation: Tach cable should be installed as straight as possible - the inner cable length will decrease 11\/16\" per 360 degrees of bends.1. Select the proper length from the listing, but measure old tach cable to verify length in chart is correct for your aircraft, as tach cables can vary from aircraft to aircraft. Over-length cables can cause problems - order one that fits the installation. 2. Measure original cable from end of Ferrule to end of Ferrule when fully extended. 3. Inner tach cables are measured end to end. Inner assemblies have male ends only. One end is squared and the other is keyed. Tach cable assemblies have 7\/8-18 on one end and 5\/8-18 on the other, female nuts only.Note: Custom length tach and inner cables are available. Please contact sales for price and lead time of custom cable. You will be required to provide length and rotation. Additional information of aircraft, engine, make, model \u0026amp; dash number may be required.Note: General rule for installation: Tach cable should be installed as straight as possible - the inner cable length will decrease 11\/16\" per 360 degrees of bends.Available in left and right lay rotation. Add -R to the part number for Right Lay. 1. To determine cable rotation, note the rotation direction of the tach drive socket on the engine while looking directly at the tach drive on the engine. 2. If the drive socket rotates clockwise, a right lay inner cable is required. 3. If the drive socket rotates counter-clockwise, a left lay inner cable is required. 4. The rotation direction of the tach needle does not affect which lay should be used.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eManufacturer Part #:\u003c\/strong\u003e 15510-0600R\u003c\/p\u003e","brand":"ACS Products","offers":[{"title":"Default Title","offer_id":54255514943830,"sku":"10-03362-R","price":136.85,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1037\/0164\/3606\/files\/10-16900c_64050d0d-d5a4-4677-ac26-7271377607bc.jpg?v=1781872218"},{"product_id":"10-03363","title":"Tachometer Cable 72 Left Lay","description":"\u003cp\u003eNote: General rule for installation: Tach cable should be installed as straight as possible - the inner cable length will decrease 11\/16\" per 360 degrees of bends.1. Select the proper length from the listing, but measure old tach cable to verify length in chart is correct for your aircraft, as tach cables can vary from aircraft to aircraft. Over-length cables can cause problems - order one that fits the installation. 2. Measure original cable from end of Ferrule to end of Ferrule when fully extended. 3. Inner tach cables are measured end to end. Inner assemblies have male ends only. One end is squared and the other is keyed. Tach cable assemblies have 7\/8-18 on one end and 5\/8-18 on the other, female nuts only.Note: Custom length tach and inner cables are available. Please contact sales for price and lead time of custom cable. You will be required to provide length and rotation. Additional information of aircraft, engine, make, model \u0026amp; dash number may be required.Note: General rule for installation: Tach cable should be installed as straight as possible - the inner cable length will decrease 11\/16\" per 360 degrees of bends.Available in left and right lay rotation. Add -R to the part number for Right Lay. 1. To determine cable rotation, note the rotation direction of the tach drive socket on the engine while looking directly at the tach drive on the engine. 2. If the drive socket rotates clockwise, a right lay inner cable is required. 3. If the drive socket rotates counter-clockwise, a left lay inner cable is required. 4. The rotation direction of the tach needle does not affect which lay should be used.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eManufacturer Part #:\u003c\/strong\u003e 15510-0720\u003c\/p\u003e","brand":"ACS Products","offers":[{"title":"Default Title","offer_id":54255514976598,"sku":"10-03363","price":138.25,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1037\/0164\/3606\/files\/10-16900c_3e24a36f-9ce6-43ec-a668-c27916d9b38e.jpg?v=1781872220"},{"product_id":"10-03363-r","title":"Tachometer Cable 72 Right Lay","description":"\u003cp\u003eNote: General rule for installation: Tach cable should be installed as straight as possible - the inner cable length will decrease 11\/16\" per 360 degrees of bends.1. Select the proper length from the listing, but measure old tach cable to verify length in chart is correct for your aircraft, as tach cables can vary from aircraft to aircraft. Over-length cables can cause problems - order one that fits the installation. 2. Measure original cable from end of Ferrule to end of Ferrule when fully extended. 3. Inner tach cables are measured end to end. Inner assemblies have male ends only. One end is squared and the other is keyed. Tach cable assemblies have 7\/8-18 on one end and 5\/8-18 on the other, female nuts only.Note: Custom length tach and inner cables are available. Please contact sales for price and lead time of custom cable. You will be required to provide length and rotation. Additional information of aircraft, engine, make, model \u0026amp; dash number may be required.Note: General rule for installation: Tach cable should be installed as straight as possible - the inner cable length will decrease 11\/16\" per 360 degrees of bends.Available in left and right lay rotation. Add -R to the part number for Right Lay. 1. To determine cable rotation, note the rotation direction of the tach drive socket on the engine while looking directly at the tach drive on the engine. 2. If the drive socket rotates clockwise, a right lay inner cable is required. 3. If the drive socket rotates counter-clockwise, a left lay inner cable is required. 4. The rotation direction of the tach needle does not affect which lay should be used.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eManufacturer Part #:\u003c\/strong\u003e 15510-0720R\u003c\/p\u003e","brand":"ACS Products","offers":[{"title":"Default Title","offer_id":54255515074902,"sku":"10-03363-R","price":138.25,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1037\/0164\/3606\/files\/10-16900c_10926bdf-e704-4498-8b45-56a7067da370.jpg?v=1781872221"},{"product_id":"10-03364","title":"Tachometer Cable 84 Left Lay","description":"\u003cp\u003eNote: General rule for installation: Tach cable should be installed as straight as possible - the inner cable length will decrease 11\/16\" per 360 degrees of bends.1. Select the proper length from the listing, but measure old tach cable to verify length in chart is correct for your aircraft, as tach cables can vary from aircraft to aircraft. Over-length cables can cause problems - order one that fits the installation. 2. Measure original cable from end of Ferrule to end of Ferrule when fully extended. 3. Inner tach cables are measured end to end. Inner assemblies have male ends only. One end is squared and the other is keyed. Tach cable assemblies have 7\/8-18 on one end and 5\/8-18 on the other, female nuts only.Note: Custom length tach and inner cables are available. Please contact sales for price and lead time of custom cable. You will be required to provide length and rotation. Additional information of aircraft, engine, make, model \u0026amp; dash number may be required.Note: General rule for installation: Tach cable should be installed as straight as possible - the inner cable length will decrease 11\/16\" per 360 degrees of bends.Available in left and right lay rotation. Add -R to the part number for Right Lay. 1. To determine cable rotation, note the rotation direction of the tach drive socket on the engine while looking directly at the tach drive on the engine. 2. If the drive socket rotates clockwise, a right lay inner cable is required. 3. If the drive socket rotates counter-clockwise, a left lay inner cable is required. 4. The rotation direction of the tach needle does not affect which lay should be used.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eManufacturer Part #:\u003c\/strong\u003e 15510-0840\u003c\/p\u003e","brand":"ACS Products","offers":[{"title":"Default Title","offer_id":54255515107670,"sku":"10-03364","price":145.25,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1037\/0164\/3606\/files\/10-16900c_c25fffa6-f9f9-4c55-92d8-ce826ee5f901.jpg?v=1781872223"},{"product_id":"10-03364-r","title":"Tachometer Cable 84 Right Lay","description":"\u003cp\u003eNote: General rule for installation: Tach cable should be installed as straight as possible - the inner cable length will decrease 11\/16\" per 360 degrees of bends.1. Select the proper length from the listing, but measure old tach cable to verify length in chart is correct for your aircraft, as tach cables can vary from aircraft to aircraft. Over-length cables can cause problems - order one that fits the installation. 2. Measure original cable from end of Ferrule to end of Ferrule when fully extended. 3. Inner tach cables are measured end to end. Inner assemblies have male ends only. One end is squared and the other is keyed. Tach cable assemblies have 7\/8-18 on one end and 5\/8-18 on the other, female nuts only.Note: Custom length tach and inner cables are available. Please contact sales for price and lead time of custom cable. You will be required to provide length and rotation. Additional information of aircraft, engine, make, model \u0026amp; dash number may be required.Note: General rule for installation: Tach cable should be installed as straight as possible - the inner cable length will decrease 11\/16\" per 360 degrees of bends.Available in left and right lay rotation. Add -R to the part number for Right Lay. 1. To determine cable rotation, note the rotation direction of the tach drive socket on the engine while looking directly at the tach drive on the engine. 2. If the drive socket rotates clockwise, a right lay inner cable is required. 3. If the drive socket rotates counter-clockwise, a left lay inner cable is required. 4. The rotation direction of the tach needle does not affect which lay should be used.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eManufacturer Part #:\u003c\/strong\u003e 15510-0840R\u003c\/p\u003e","brand":"ACS Products","offers":[{"title":"Default Title","offer_id":54255515140438,"sku":"10-03364-R","price":138.39,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1037\/0164\/3606\/files\/10-16900c_9b44a597-cc4b-451f-8c1e-84d84aa774cc.jpg?v=1781872224"},{"product_id":"10-03365","title":"Tachometer Cable 96 Left Lay","description":"\u003cp\u003eNote: General rule for installation: Tach cable should be installed as straight as possible - the inner cable length will decrease 11\/16\" per 360 degrees of bends.1. Select the proper length from the listing, but measure old tach cable to verify length in chart is correct for your aircraft, as tach cables can vary from aircraft to aircraft. Over-length cables can cause problems - order one that fits the installation. 2. Measure original cable from end of Ferrule to end of Ferrule when fully extended. 3. Inner tach cables are measured end to end. Inner assemblies have male ends only. One end is squared and the other is keyed. Tach cable assemblies have 7\/8-18 on one end and 5\/8-18 on the other, female nuts only.Note: Custom length tach and inner cables are available. Please contact sales for price and lead time of custom cable. You will be required to provide length and rotation. Additional information of aircraft, engine, make, model \u0026amp; dash number may be required.Note: General rule for installation: Tach cable should be installed as straight as possible - the inner cable length will decrease 11\/16\" per 360 degrees of bends.Available in left and right lay rotation. Add -R to the part number for Right Lay. 1. To determine cable rotation, note the rotation direction of the tach drive socket on the engine while looking directly at the tach drive on the engine. 2. If the drive socket rotates clockwise, a right lay inner cable is required. 3. If the drive socket rotates counter-clockwise, a left lay inner cable is required. 4. The rotation direction of the tach needle does not affect which lay should be used.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eManufacturer Part #:\u003c\/strong\u003e 15510-0960\u003c\/p\u003e","brand":"ACS Products","offers":[{"title":"Default Title","offer_id":54255515337046,"sku":"10-03365","price":150.85,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1037\/0164\/3606\/files\/10-16900c_99a4aadc-0fce-4515-96f4-fd6b1914fd18.jpg?v=1781872226"},{"product_id":"10-03365-r","title":"Tachometer Cable 96 Right Lay","description":"\u003cp\u003eNote: General rule for installation: Tach cable should be installed as straight as possible - the inner cable length will decrease 11\/16\" per 360 degrees of bends.1. Select the proper length from the listing, but measure old tach cable to verify length in chart is correct for your aircraft, as tach cables can vary from aircraft to aircraft. Over-length cables can cause problems - order one that fits the installation. 2. Measure original cable from end of Ferrule to end of Ferrule when fully extended. 3. Inner tach cables are measured end to end. Inner assemblies have male ends only. One end is squared and the other is keyed. Tach cable assemblies have 7\/8-18 on one end and 5\/8-18 on the other, female nuts only.Note: Custom length tach and inner cables are available. Please contact sales for price and lead time of custom cable. You will be required to provide length and rotation. Additional information of aircraft, engine, make, model \u0026amp; dash number may be required.Note: General rule for installation: Tach cable should be installed as straight as possible - the inner cable length will decrease 11\/16\" per 360 degrees of bends.Available in left and right lay rotation. Add -R to the part number for Right Lay. 1. To determine cable rotation, note the rotation direction of the tach drive socket on the engine while looking directly at the tach drive on the engine. 2. If the drive socket rotates clockwise, a right lay inner cable is required. 3. If the drive socket rotates counter-clockwise, a left lay inner cable is required. 4. The rotation direction of the tach needle does not affect which lay should be used.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eManufacturer Part #:\u003c\/strong\u003e 15510-0960R\u003c\/p\u003e","brand":"ACS Products","offers":[{"title":"Default Title","offer_id":54255515468118,"sku":"10-03365-R","price":150.85,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1037\/0164\/3606\/files\/10-16900c_c237d174-5b66-4cba-9fa8-3257d5fb60e5.jpg?v=1781872227"},{"product_id":"10-03366","title":"Tachometer Cable 108 Left Lay","description":"\u003cp\u003eNote: General rule for installation: Tach cable should be installed as straight as possible - the inner cable length will decrease 11\/16\" per 360 degrees of bends.1. Select the proper length from the listing, but measure old tach cable to verify length in chart is correct for your aircraft, as tach cables can vary from aircraft to aircraft. Over-length cables can cause problems - order one that fits the installation. 2. Measure original cable from end of Ferrule to end of Ferrule when fully extended. 3. Inner tach cables are measured end to end. Inner assemblies have male ends only. One end is squared and the other is keyed. Tach cable assemblies have 7\/8-18 on one end and 5\/8-18 on the other, female nuts only.Note: Custom length tach and inner cables are available. Please contact sales for price and lead time of custom cable. You will be required to provide length and rotation. Additional information of aircraft, engine, make, model \u0026amp; dash number may be required.Note: General rule for installation: Tach cable should be installed as straight as possible - the inner cable length will decrease 11\/16\" per 360 degrees of bends.Available in left and right lay rotation. Add -R to the part number for Right Lay. 1. To determine cable rotation, note the rotation direction of the tach drive socket on the engine while looking directly at the tach drive on the engine. 2. If the drive socket rotates clockwise, a right lay inner cable is required. 3. If the drive socket rotates counter-clockwise, a left lay inner cable is required. 4. The rotation direction of the tach needle does not affect which lay should be used.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eManufacturer Part #:\u003c\/strong\u003e 15510-1080\u003c\/p\u003e","brand":"ACS Products","offers":[{"title":"Default Title","offer_id":54255515861334,"sku":"10-03366","price":157.85,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1037\/0164\/3606\/files\/10-16900c_8ed3ccd6-8147-4efa-97d9-c360cf7f86ad.jpg?v=1781872229"},{"product_id":"10-03366-r","title":"Tachometer Cable 108 Right Lay","description":"\u003cp\u003eNote: General rule for installation: Tach cable should be installed as straight as possible - the inner cable length will decrease 11\/16\" per 360 degrees of bends.1. Select the proper length from the listing, but measure old tach cable to verify length in chart is correct for your aircraft, as tach cables can vary from aircraft to aircraft. Over-length cables can cause problems - order one that fits the installation. 2. Measure original cable from end of Ferrule to end of Ferrule when fully extended. 3. Inner tach cables are measured end to end. Inner assemblies have male ends only. One end is squared and the other is keyed. Tach cable assemblies have 7\/8-18 on one end and 5\/8-18 on the other, female nuts only.Note: Custom length tach and inner cables are available. Please contact sales for price and lead time of custom cable. You will be required to provide length and rotation. Additional information of aircraft, engine, make, model \u0026amp; dash number may be required.Note: General rule for installation: Tach cable should be installed as straight as possible - the inner cable length will decrease 11\/16\" per 360 degrees of bends.Available in left and right lay rotation. Add -R to the part number for Right Lay. 1. To determine cable rotation, note the rotation direction of the tach drive socket on the engine while looking directly at the tach drive on the engine. 2. If the drive socket rotates clockwise, a right lay inner cable is required. 3. If the drive socket rotates counter-clockwise, a left lay inner cable is required. 4. The rotation direction of the tach needle does not affect which lay should be used.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eManufacturer Part #:\u003c\/strong\u003e 15510-1080R\u003c\/p\u003e","brand":"ACS Products","offers":[{"title":"Default Title","offer_id":54255515926870,"sku":"10-03366-R","price":159.25,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1037\/0164\/3606\/files\/10-16900c_a45bcab6-d5d4-4d2d-b276-23b9c0cf28bf.jpg?v=1781872230"},{"product_id":"10-03367","title":"Tachometer Cable 120 Left Lay","description":"\u003cp\u003eNote: General rule for installation: Tach cable should be installed as straight as possible - the inner cable length will decrease 11\/16\" per 360 degrees of bends.1. Select the proper length from the listing, but measure old tach cable to verify length in chart is correct for your aircraft, as tach cables can vary from aircraft to aircraft. Over-length cables can cause problems - order one that fits the installation. 2. Measure original cable from end of Ferrule to end of Ferrule when fully extended. 3. Inner tach cables are measured end to end. Inner assemblies have male ends only. One end is squared and the other is keyed. Tach cable assemblies have 7\/8-18 on one end and 5\/8-18 on the other, female nuts only.Note: Custom length tach and inner cables are available. Please contact sales for price and lead time of custom cable. You will be required to provide length and rotation. Additional information of aircraft, engine, make, model \u0026amp; dash number may be required.Note: General rule for installation: Tach cable should be installed as straight as possible - the inner cable length will decrease 11\/16\" per 360 degrees of bends.Available in left and right lay rotation. Add -R to the part number for Right Lay. 1. To determine cable rotation, note the rotation direction of the tach drive socket on the engine while looking directly at the tach drive on the engine. 2. If the drive socket rotates clockwise, a right lay inner cable is required. 3. If the drive socket rotates counter-clockwise, a left lay inner cable is required. 4. The rotation direction of the tach needle does not affect which lay should be used.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eManufacturer Part #:\u003c\/strong\u003e 15510-1200\u003c\/p\u003e","brand":"ACS Products","offers":[{"title":"Default Title","offer_id":54255515959638,"sku":"10-03367","price":169.05,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1037\/0164\/3606\/files\/10-16900c_cb861e09-3cf1-4e30-84d4-4d51ccee196e.jpg?v=1781872232"},{"product_id":"10-03367-r","title":"Tachometer Cable 120 Right Lay","description":"\u003cp\u003eNote: General rule for installation: Tach cable should be installed as straight as possible - the inner cable length will decrease 11\/16\" per 360 degrees of bends.1. Select the proper length from the listing, but measure old tach cable to verify length in chart is correct for your aircraft, as tach cables can vary from aircraft to aircraft. Over-length cables can cause problems - order one that fits the installation. 2. Measure original cable from end of Ferrule to end of Ferrule when fully extended. 3. Inner tach cables are measured end to end. Inner assemblies have male ends only. One end is squared and the other is keyed. Tach cable assemblies have 7\/8-18 on one end and 5\/8-18 on the other, female nuts only.Note: Custom length tach and inner cables are available. Please contact sales for price and lead time of custom cable. You will be required to provide length and rotation. Additional information of aircraft, engine, make, model \u0026amp; dash number may be required.Note: General rule for installation: Tach cable should be installed as straight as possible - the inner cable length will decrease 11\/16\" per 360 degrees of bends.Available in left and right lay rotation. Add -R to the part number for Right Lay. 1. To determine cable rotation, note the rotation direction of the tach drive socket on the engine while looking directly at the tach drive on the engine. 2. If the drive socket rotates clockwise, a right lay inner cable is required. 3. If the drive socket rotates counter-clockwise, a left lay inner cable is required. 4. The rotation direction of the tach needle does not affect which lay should be used.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eManufacturer Part #:\u003c\/strong\u003e 15510-1200R\u003c\/p\u003e","brand":"ACS Products","offers":[{"title":"Default Title","offer_id":54255515992406,"sku":"10-03367-R","price":166.25,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1037\/0164\/3606\/files\/10-16900c_f8309a9d-0b39-40a2-8d09-6fc1bf4941e2.jpg?v=1781872233"},{"product_id":"10-03368","title":"Tachometer Cable 132 Left Lay","description":"\u003cp\u003eNote: General rule for installation: Tach cable should be installed as straight as possible - the inner cable length will decrease 11\/16\" per 360 degrees of bends.1. Select the proper length from the listing, but measure old tach cable to verify length in chart is correct for your aircraft, as tach cables can vary from aircraft to aircraft. Over-length cables can cause problems - order one that fits the installation. 2. Measure original cable from end of Ferrule to end of Ferrule when fully extended. 3. Inner tach cables are measured end to end. Inner assemblies have male ends only. One end is squared and the other is keyed. Tach cable assemblies have 7\/8-18 on one end and 5\/8-18 on the other, female nuts only.Note: Custom length tach and inner cables are available. Please contact sales for price and lead time of custom cable. You will be required to provide length and rotation. Additional information of aircraft, engine, make, model \u0026amp; dash number may be required.Note: General rule for installation: Tach cable should be installed as straight as possible - the inner cable length will decrease 11\/16\" per 360 degrees of bends.Available in left and right lay rotation. Add -R to the part number for Right Lay. 1. To determine cable rotation, note the rotation direction of the tach drive socket on the engine while looking directly at the tach drive on the engine. 2. If the drive socket rotates clockwise, a right lay inner cable is required. 3. If the drive socket rotates counter-clockwise, a left lay inner cable is required. 4. The rotation direction of the tach needle does not affect which lay should be used.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eManufacturer Part #:\u003c\/strong\u003e 15510-1320\u003c\/p\u003e","brand":"ACS Products","offers":[{"title":"Default Title","offer_id":54255516057942,"sku":"10-03368","price":180.25,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1037\/0164\/3606\/files\/10-16900c_8fe81fbf-7236-4b77-87a9-3ff66a21da36.jpg?v=1781872235"},{"product_id":"10-03369","title":"Tachometer Cable 144 Left Lay","description":"\u003cp\u003eNote: General rule for installation: Tach cable should be installed as straight as possible - the inner cable length will decrease 11\/16\" per 360 degrees of bends.1. Select the proper length from the listing, but measure old tach cable to verify length in chart is correct for your aircraft, as tach cables can vary from aircraft to aircraft. Over-length cables can cause problems - order one that fits the installation. 2. Measure original cable from end of Ferrule to end of Ferrule when fully extended. 3. Inner tach cables are measured end to end. Inner assemblies have male ends only. One end is squared and the other is keyed. Tach cable assemblies have 7\/8-18 on one end and 5\/8-18 on the other, female nuts only.Note: Custom length tach and inner cables are available. Please contact sales for price and lead time of custom cable. You will be required to provide length and rotation. Additional information of aircraft, engine, make, model \u0026amp; dash number may be required.Note: General rule for installation: Tach cable should be installed as straight as possible - the inner cable length will decrease 11\/16\" per 360 degrees of bends.Available in left and right lay rotation. Add -R to the part number for Right Lay. 1. To determine cable rotation, note the rotation direction of the tach drive socket on the engine while looking directly at the tach drive on the engine. 2. If the drive socket rotates clockwise, a right lay inner cable is required. 3. If the drive socket rotates counter-clockwise, a left lay inner cable is required. 4. The rotation direction of the tach needle does not affect which lay should be used.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eManufacturer Part #:\u003c\/strong\u003e 15510-1440\u003c\/p\u003e","brand":"ACS Products","offers":[{"title":"Default Title","offer_id":54255516090710,"sku":"10-03369","price":195.65,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1037\/0164\/3606\/files\/10-16900c_a8f283fd-a5e5-4a40-bdf3-d7a313d7b870.jpg?v=1781872236"},{"product_id":"10-03369-r","title":"Tachometer Cable 144 Right Lay","description":"\u003cp\u003eNote: General rule for installation: Tach cable should be installed as straight as possible - the inner cable length will decrease 11\/16\" per 360 degrees of bends.1. Select the proper length from the listing, but measure old tach cable to verify length in chart is correct for your aircraft, as tach cables can vary from aircraft to aircraft. Over-length cables can cause problems - order one that fits the installation. 2. Measure original cable from end of Ferrule to end of Ferrule when fully extended. 3. Inner tach cables are measured end to end. Inner assemblies have male ends only. One end is squared and the other is keyed. Tach cable assemblies have 7\/8-18 on one end and 5\/8-18 on the other, female nuts only.Note: Custom length tach and inner cables are available. Please contact sales for price and lead time of custom cable. You will be required to provide length and rotation. Additional information of aircraft, engine, make, model \u0026amp; dash number may be required.Note: General rule for installation: Tach cable should be installed as straight as possible - the inner cable length will decrease 11\/16\" per 360 degrees of bends.Available in left and right lay rotation. Add -R to the part number for Right Lay. 1. To determine cable rotation, note the rotation direction of the tach drive socket on the engine while looking directly at the tach drive on the engine. 2. If the drive socket rotates clockwise, a right lay inner cable is required. 3. If the drive socket rotates counter-clockwise, a left lay inner cable is required. 4. The rotation direction of the tach needle does not affect which lay should be used.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eManufacturer Part #:\u003c\/strong\u003e 15510-1440R\u003c\/p\u003e","brand":"ACS Products","offers":[{"title":"Default Title","offer_id":54255516451158,"sku":"10-03369-R","price":195.65,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1037\/0164\/3606\/files\/10-16900c_f8cd6900-e3be-4f6e-8d21-2069fc948168.jpg?v=1781872237"},{"product_id":"10-03368-r","title":"Tachometer Cable 132 Right Lay","description":"\u003cp\u003eNote: General rule for installation: Tach cable should be installed as straight as possible - the inner cable length will decrease 11\/16\" per 360 degrees of bends.1. Select the proper length from the listing, but measure old tach cable to verify length in chart is correct for your aircraft, as tach cables can vary from aircraft to aircraft. Over-length cables can cause problems - order one that fits the installation. 2. Measure original cable from end of Ferrule to end of Ferrule when fully extended. 3. Inner tach cables are measured end to end. Inner assemblies have male ends only. One end is squared and the other is keyed. Tach cable assemblies have 7\/8-18 on one end and 5\/8-18 on the other, female nuts only.Note: Custom length tach and inner cables are available. Please contact sales for price and lead time of custom cable. You will be required to provide length and rotation. Additional information of aircraft, engine, make, model \u0026amp; dash number may be required.Note: General rule for installation: Tach cable should be installed as straight as possible - the inner cable length will decrease 11\/16\" per 360 degrees of bends.Available in left and right lay rotation. Add -R to the part number for Right Lay. 1. To determine cable rotation, note the rotation direction of the tach drive socket on the engine while looking directly at the tach drive on the engine. 2. If the drive socket rotates clockwise, a right lay inner cable is required. 3. If the drive socket rotates counter-clockwise, a left lay inner cable is required. 4. The rotation direction of the tach needle does not affect which lay should be used.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eManufacturer Part #:\u003c\/strong\u003e 15510-1320R\u003c\/p\u003e","brand":"ACS Products","offers":[{"title":"Default Title","offer_id":54255516483926,"sku":"10-03368-R","price":183.05,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1037\/0164\/3606\/files\/10-16900c_c2112413-e47e-497b-8710-3d211533bd39.jpg?v=1781872239"},{"product_id":"10-03370","title":"Tachometer Cable 156 Left Lay","description":"\u003cp\u003eNote: General rule for installation: Tach cable should be installed as straight as possible - the inner cable length will decrease 11\/16\" per 360 degrees of bends.1. Select the proper length from the listing, but measure old tach cable to verify length in chart is correct for your aircraft, as tach cables can vary from aircraft to aircraft. Over-length cables can cause problems - order one that fits the installation. 2. Measure original cable from end of Ferrule to end of Ferrule when fully extended. 3. Inner tach cables are measured end to end. Inner assemblies have male ends only. One end is squared and the other is keyed. Tach cable assemblies have 7\/8-18 on one end and 5\/8-18 on the other, female nuts only.Note: Custom length tach and inner cables are available. Please contact sales for price and lead time of custom cable. You will be required to provide length and rotation. Additional information of aircraft, engine, make, model \u0026amp; dash number may be required.Note: General rule for installation: Tach cable should be installed as straight as possible - the inner cable length will decrease 11\/16\" per 360 degrees of bends.Available in left and right lay rotation. Add -R to the part number for Right Lay. 1. To determine cable rotation, note the rotation direction of the tach drive socket on the engine while looking directly at the tach drive on the engine. 2. If the drive socket rotates clockwise, a right lay inner cable is required. 3. If the drive socket rotates counter-clockwise, a left lay inner cable is required. 4. The rotation direction of the tach needle does not affect which lay should be used.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eManufacturer Part #:\u003c\/strong\u003e 15510-1560\u003c\/p\u003e","brand":"ACS Products","offers":[{"title":"Default Title","offer_id":54255516549462,"sku":"10-03370","price":307.93,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1037\/0164\/3606\/files\/10-16900c_2fb7b2a2-3e21-46d3-a827-ab31cd6494f5.jpg?v=1781872240"},{"product_id":"10-03370-r","title":"Tachometer Cable 156 Right Lay","description":"\u003cp\u003eNote: General rule for installation: Tach cable should be installed as straight as possible - the inner cable length will decrease 11\/16\" per 360 degrees of bends.1. Select the proper length from the listing, but measure old tach cable to verify length in chart is correct for your aircraft, as tach cables can vary from aircraft to aircraft. Over-length cables can cause problems - order one that fits the installation. 2. Measure original cable from end of Ferrule to end of Ferrule when fully extended. 3. Inner tach cables are measured end to end. Inner assemblies have male ends only. One end is squared and the other is keyed. Tach cable assemblies have 7\/8-18 on one end and 5\/8-18 on the other, female nuts only.Note: Custom length tach and inner cables are available. Please contact sales for price and lead time of custom cable. You will be required to provide length and rotation. Additional information of aircraft, engine, make, model \u0026amp; dash number may be required.Note: General rule for installation: Tach cable should be installed as straight as possible - the inner cable length will decrease 11\/16\" per 360 degrees of bends.Available in left and right lay rotation. Add -R to the part number for Right Lay. 1. To determine cable rotation, note the rotation direction of the tach drive socket on the engine while looking directly at the tach drive on the engine. 2. If the drive socket rotates clockwise, a right lay inner cable is required. 3. If the drive socket rotates counter-clockwise, a left lay inner cable is required. 4. The rotation direction of the tach needle does not affect which lay should be used.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eManufacturer Part #:\u003c\/strong\u003e 15510-1560R\u003c\/p\u003e","brand":"ACS Products","offers":[{"title":"Default Title","offer_id":54255516582230,"sku":"10-03370-R","price":300.93,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1037\/0164\/3606\/files\/10-16900c_cd1f330f-2801-4c44-b23e-d4e346ef778b.jpg?v=1781872242"},{"product_id":"10-03371","title":"Tachometer Cable 168 Left Lay","description":"\u003cp\u003eNote: General rule for installation: Tach cable should be installed as straight as possible - the inner cable length will decrease 11\/16\" per 360 degrees of bends.1. Select the proper length from the listing, but measure old tach cable to verify length in chart is correct for your aircraft, as tach cables can vary from aircraft to aircraft. Over-length cables can cause problems - order one that fits the installation. 2. Measure original cable from end of Ferrule to end of Ferrule when fully extended. 3. Inner tach cables are measured end to end. Inner assemblies have male ends only. One end is squared and the other is keyed. Tach cable assemblies have 7\/8-18 on one end and 5\/8-18 on the other, female nuts only.Note: Custom length tach and inner cables are available. Please contact sales for price and lead time of custom cable. You will be required to provide length and rotation. Additional information of aircraft, engine, make, model \u0026amp; dash number may be required.Note: General rule for installation: Tach cable should be installed as straight as possible - the inner cable length will decrease 11\/16\" per 360 degrees of bends.Available in left and right lay rotation. Add -R to the part number for Right Lay. 1. To determine cable rotation, note the rotation direction of the tach drive socket on the engine while looking directly at the tach drive on the engine. 2. If the drive socket rotates clockwise, a right lay inner cable is required. 3. If the drive socket rotates counter-clockwise, a left lay inner cable is required. 4. The rotation direction of the tach needle does not affect which lay should be used.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eManufacturer Part #:\u003c\/strong\u003e 15510-1680\u003c\/p\u003e","brand":"ACS Products","offers":[{"title":"Default Title","offer_id":54255516647766,"sku":"10-03371","price":314.93,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1037\/0164\/3606\/files\/10-16900c_cbb3b316-eb8a-4e8c-9cea-bda3776f77e3.jpg?v=1781872243"},{"product_id":"10-03371-r","title":"Tachometer Cable 168 Right Lay","description":"\u003cp\u003eNote: General rule for installation: Tach cable should be installed as straight as possible - the inner cable length will decrease 11\/16\" per 360 degrees of bends.1. Select the proper length from the listing, but measure old tach cable to verify length in chart is correct for your aircraft, as tach cables can vary from aircraft to aircraft. Over-length cables can cause problems - order one that fits the installation. 2. Measure original cable from end of Ferrule to end of Ferrule when fully extended. 3. Inner tach cables are measured end to end. Inner assemblies have male ends only. One end is squared and the other is keyed. Tach cable assemblies have 7\/8-18 on one end and 5\/8-18 on the other, female nuts only.Note: Custom length tach and inner cables are available. Please contact sales for price and lead time of custom cable. You will be required to provide length and rotation. Additional information of aircraft, engine, make, model \u0026amp; dash number may be required.Note: General rule for installation: Tach cable should be installed as straight as possible - the inner cable length will decrease 11\/16\" per 360 degrees of bends.Available in left and right lay rotation. Add -R to the part number for Right Lay. 1. To determine cable rotation, note the rotation direction of the tach drive socket on the engine while looking directly at the tach drive on the engine. 2. If the drive socket rotates clockwise, a right lay inner cable is required. 3. If the drive socket rotates counter-clockwise, a left lay inner cable is required. 4. The rotation direction of the tach needle does not affect which lay should be used.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eManufacturer Part #:\u003c\/strong\u003e 15510-1680R\u003c\/p\u003e","brand":"ACS Products","offers":[{"title":"Default Title","offer_id":54255516713302,"sku":"10-03371-R","price":314.93,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1037\/0164\/3606\/files\/10-16900c_1de0ab8c-d701-4f6b-a0b9-e5a9993dcc9e.jpg?v=1781872244"},{"product_id":"10-03372","title":"Tachometer Cable 180 Left Lay","description":"\u003cp\u003eNote: General rule for installation: Tach cable should be installed as straight as possible - the inner cable length will decrease 11\/16\" per 360 degrees of bends.1. Select the proper length from the listing, but measure old tach cable to verify length in chart is correct for your aircraft, as tach cables can vary from aircraft to aircraft. Over-length cables can cause problems - order one that fits the installation. 2. Measure original cable from end of Ferrule to end of Ferrule when fully extended. 3. Inner tach cables are measured end to end. Inner assemblies have male ends only. One end is squared and the other is keyed. Tach cable assemblies have 7\/8-18 on one end and 5\/8-18 on the other, female nuts only.Note: Custom length tach and inner cables are available. Please contact sales for price and lead time of custom cable. You will be required to provide length and rotation. Additional information of aircraft, engine, make, model \u0026amp; dash number may be required.Note: General rule for installation: Tach cable should be installed as straight as possible - the inner cable length will decrease 11\/16\" per 360 degrees of bends.Available in left and right lay rotation. Add -R to the part number for Right Lay. 1. To determine cable rotation, note the rotation direction of the tach drive socket on the engine while looking directly at the tach drive on the engine. 2. If the drive socket rotates clockwise, a right lay inner cable is required. 3. If the drive socket rotates counter-clockwise, a left lay inner cable is required. 4. The rotation direction of the tach needle does not affect which lay should be used.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eManufacturer Part #:\u003c\/strong\u003e 15510-1800\u003c\/p\u003e","brand":"ACS Products","offers":[{"title":"Default Title","offer_id":54255517073750,"sku":"10-03372","price":328.93,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1037\/0164\/3606\/files\/10-16900c_0e982b15-06bf-4101-af63-dce1cd88109c.jpg?v=1781872246"},{"product_id":"10-03372-r","title":"Tachometer Cable 180 Right Lay","description":"\u003cp\u003eNote: General rule for installation: Tach cable should be installed as straight as possible - the inner cable length will decrease 11\/16\" per 360 degrees of bends.1. Select the proper length from the listing, but measure old tach cable to verify length in chart is correct for your aircraft, as tach cables can vary from aircraft to aircraft. Over-length cables can cause problems - order one that fits the installation. 2. Measure original cable from end of Ferrule to end of Ferrule when fully extended. 3. Inner tach cables are measured end to end. Inner assemblies have male ends only. One end is squared and the other is keyed. Tach cable assemblies have 7\/8-18 on one end and 5\/8-18 on the other, female nuts only.Note: Custom length tach and inner cables are available. Please contact sales for price and lead time of custom cable. You will be required to provide length and rotation. Additional information of aircraft, engine, make, model \u0026amp; dash number may be required.Note: General rule for installation: Tach cable should be installed as straight as possible - the inner cable length will decrease 11\/16\" per 360 degrees of bends.Available in left and right lay rotation. Add -R to the part number for Right Lay. 1. To determine cable rotation, note the rotation direction of the tach drive socket on the engine while looking directly at the tach drive on the engine. 2. If the drive socket rotates clockwise, a right lay inner cable is required. 3. If the drive socket rotates counter-clockwise, a left lay inner cable is required. 4. The rotation direction of the tach needle does not affect which lay should be used.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eManufacturer Part #:\u003c\/strong\u003e 15510-1800R\u003c\/p\u003e","brand":"ACS Products","offers":[{"title":"Default Title","offer_id":54255517106518,"sku":"10-03372-R","price":328.93,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1037\/0164\/3606\/files\/10-16900c_db0ce33e-fa5b-4a00-b5cf-1100e544e47a.jpg?v=1781872247"},{"product_id":"10-03373","title":"Tachometer Cable 192 Left Lay","description":"\u003cp\u003eNote: General rule for installation: Tach cable should be installed as straight as possible - the inner cable length will decrease 11\/16\" per 360 degrees of bends.1. Select the proper length from the listing, but measure old tach cable to verify length in chart is correct for your aircraft, as tach cables can vary from aircraft to aircraft. Over-length cables can cause problems - order one that fits the installation. 2. Measure original cable from end of Ferrule to end of Ferrule when fully extended. 3. Inner tach cables are measured end to end. Inner assemblies have male ends only. One end is squared and the other is keyed. Tach cable assemblies have 7\/8-18 on one end and 5\/8-18 on the other, female nuts only.Note: Custom length tach and inner cables are available. Please contact sales for price and lead time of custom cable. You will be required to provide length and rotation. Additional information of aircraft, engine, make, model \u0026amp; dash number may be required.Note: General rule for installation: Tach cable should be installed as straight as possible - the inner cable length will decrease 11\/16\" per 360 degrees of bends.Available in left and right lay rotation. Add -R to the part number for Right Lay. 1. To determine cable rotation, note the rotation direction of the tach drive socket on the engine while looking directly at the tach drive on the engine. 2. If the drive socket rotates clockwise, a right lay inner cable is required. 3. If the drive socket rotates counter-clockwise, a left lay inner cable is required. 4. The rotation direction of the tach needle does not affect which lay should be used.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eManufacturer Part #:\u003c\/strong\u003e 15510-1920\u003c\/p\u003e","brand":"ACS Products","offers":[{"title":"Default Title","offer_id":54255517237590,"sku":"10-03373","price":335.93,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1037\/0164\/3606\/files\/10-16900c_4a4e2f6e-d0a7-4ce7-9cee-7c2484079662.jpg?v=1781872248"},{"product_id":"10-03373-r","title":"Tachometer Cable 192 Right Lay","description":"\u003cp\u003eNote: General rule for installation: Tach cable should be installed as straight as possible - the inner cable length will decrease 11\/16\" per 360 degrees of bends.1. Select the proper length from the listing, but measure old tach cable to verify length in chart is correct for your aircraft, as tach cables can vary from aircraft to aircraft. Over-length cables can cause problems - order one that fits the installation. 2. Measure original cable from end of Ferrule to end of Ferrule when fully extended. 3. Inner tach cables are measured end to end. Inner assemblies have male ends only. One end is squared and the other is keyed. Tach cable assemblies have 7\/8-18 on one end and 5\/8-18 on the other, female nuts only.Note: Custom length tach and inner cables are available. Please contact sales for price and lead time of custom cable. You will be required to provide length and rotation. Additional information of aircraft, engine, make, model \u0026amp; dash number may be required.Note: General rule for installation: Tach cable should be installed as straight as possible - the inner cable length will decrease 11\/16\" per 360 degrees of bends.Available in left and right lay rotation. Add -R to the part number for Right Lay. 1. To determine cable rotation, note the rotation direction of the tach drive socket on the engine while looking directly at the tach drive on the engine. 2. If the drive socket rotates clockwise, a right lay inner cable is required. 3. If the drive socket rotates counter-clockwise, a left lay inner cable is required. 4. The rotation direction of the tach needle does not affect which lay should be used.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eManufacturer Part #:\u003c\/strong\u003e 15510-1920R\u003c\/p\u003e","brand":"ACS Products","offers":[{"title":"Default Title","offer_id":54255517270358,"sku":"10-03373-R","price":335.93,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1037\/0164\/3606\/files\/10-16900c_5c63fe9d-ab14-4e28-b149-07709d6ea7ce.jpg?v=1781872250"},{"product_id":"10-03374","title":"Tachometer Cable 204 Left Lay","description":"\u003cp\u003eNote: General rule for installation: Tach cable should be installed as straight as possible - the inner cable length will decrease 11\/16\" per 360 degrees of bends.1. Select the proper length from the listing, but measure old tach cable to verify length in chart is correct for your aircraft, as tach cables can vary from aircraft to aircraft. Over-length cables can cause problems - order one that fits the installation. 2. Measure original cable from end of Ferrule to end of Ferrule when fully extended. 3. Inner tach cables are measured end to end. Inner assemblies have male ends only. One end is squared and the other is keyed. Tach cable assemblies have 7\/8-18 on one end and 5\/8-18 on the other, female nuts only.Note: Custom length tach and inner cables are available. Please contact sales for price and lead time of custom cable. You will be required to provide length and rotation. Additional information of aircraft, engine, make, model \u0026amp; dash number may be required.Note: General rule for installation: Tach cable should be installed as straight as possible - the inner cable length will decrease 11\/16\" per 360 degrees of bends.Available in left and right lay rotation. Add -R to the part number for Right Lay. 1. To determine cable rotation, note the rotation direction of the tach drive socket on the engine while looking directly at the tach drive on the engine. 2. If the drive socket rotates clockwise, a right lay inner cable is required. 3. If the drive socket rotates counter-clockwise, a left lay inner cable is required. 4. The rotation direction of the tach needle does not affect which lay should be used.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eManufacturer Part #:\u003c\/strong\u003e 15510-2040\u003c\/p\u003e","brand":"ACS Products","offers":[{"title":"Default Title","offer_id":54255517368662,"sku":"10-03374","price":299.53,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1037\/0164\/3606\/files\/10-16900c_c808daa8-cfd9-4f4e-910d-58dd33f3d171.jpg?v=1781872251"},{"product_id":"10-03374-r","title":"Tachometer Cable 204 Right Lay","description":"\u003cp\u003eNote: General rule for installation: Tach cable should be installed as straight as possible - the inner cable length will decrease 11\/16\" per 360 degrees of bends.1. Select the proper length from the listing, but measure old tach cable to verify length in chart is correct for your aircraft, as tach cables can vary from aircraft to aircraft. Over-length cables can cause problems - order one that fits the installation. 2. Measure original cable from end of Ferrule to end of Ferrule when fully extended. 3. Inner tach cables are measured end to end. Inner assemblies have male ends only. One end is squared and the other is keyed. Tach cable assemblies have 7\/8-18 on one end and 5\/8-18 on the other, female nuts only.Note: Custom length tach and inner cables are available. Please contact sales for price and lead time of custom cable. You will be required to provide length and rotation. Additional information of aircraft, engine, make, model \u0026amp; dash number may be required.Note: General rule for installation: Tach cable should be installed as straight as possible - the inner cable length will decrease 11\/16\" per 360 degrees of bends.Available in left and right lay rotation. Add -R to the part number for Right Lay. 1. To determine cable rotation, note the rotation direction of the tach drive socket on the engine while looking directly at the tach drive on the engine. 2. If the drive socket rotates clockwise, a right lay inner cable is required. 3. If the drive socket rotates counter-clockwise, a left lay inner cable is required. 4. The rotation direction of the tach needle does not affect which lay should be used.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eManufacturer Part #:\u003c\/strong\u003e 15510-2040R\u003c\/p\u003e","brand":"ACS Products","offers":[{"title":"Default Title","offer_id":54255517630806,"sku":"10-03374-R","price":348.53,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1037\/0164\/3606\/files\/10-16900c_ea7c0a22-0c5a-47dd-93ac-e69c49fd050a.jpg?v=1781872253"},{"product_id":"10-03375","title":"Tachometer Cable 216 Left Lay","description":"\u003cp\u003eNote: General rule for installation: Tach cable should be installed as straight as possible - the inner cable length will decrease 11\/16\" per 360 degrees of bends.1. Select the proper length from the listing, but measure old tach cable to verify length in chart is correct for your aircraft, as tach cables can vary from aircraft to aircraft. Over-length cables can cause problems - order one that fits the installation. 2. Measure original cable from end of Ferrule to end of Ferrule when fully extended. 3. Inner tach cables are measured end to end. Inner assemblies have male ends only. One end is squared and the other is keyed. Tach cable assemblies have 7\/8-18 on one end and 5\/8-18 on the other, female nuts only.Note: Custom length tach and inner cables are available. Please contact sales for price and lead time of custom cable. You will be required to provide length and rotation. Additional information of aircraft, engine, make, model \u0026amp; dash number may be required.Note: General rule for installation: Tach cable should be installed as straight as possible - the inner cable length will decrease 11\/16\" per 360 degrees of bends.Available in left and right lay rotation. Add -R to the part number for Right Lay. 1. To determine cable rotation, note the rotation direction of the tach drive socket on the engine while looking directly at the tach drive on the engine. 2. If the drive socket rotates clockwise, a right lay inner cable is required. 3. If the drive socket rotates counter-clockwise, a left lay inner cable is required. 4. The rotation direction of the tach needle does not affect which lay should be used.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eManufacturer Part #:\u003c\/strong\u003e 15510-2160\u003c\/p\u003e","brand":"ACS Products","offers":[{"title":"Default Title","offer_id":54255517663574,"sku":"10-03375","price":356.93,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1037\/0164\/3606\/files\/10-16900c_f99e21da-f2c4-4836-aeb6-fd472b54ef02.jpg?v=1781872255"},{"product_id":"10-03375-r","title":"Tachometer Cable 216 Right Lay","description":"\u003cp\u003eNote: General rule for installation: Tach cable should be installed as straight as possible - the inner cable length will decrease 11\/16\" per 360 degrees of bends.1. Select the proper length from the listing, but measure old tach cable to verify length in chart is correct for your aircraft, as tach cables can vary from aircraft to aircraft. Over-length cables can cause problems - order one that fits the installation. 2. Measure original cable from end of Ferrule to end of Ferrule when fully extended. 3. Inner tach cables are measured end to end. Inner assemblies have male ends only. One end is squared and the other is keyed. Tach cable assemblies have 7\/8-18 on one end and 5\/8-18 on the other, female nuts only.Note: Custom length tach and inner cables are available. Please contact sales for price and lead time of custom cable. You will be required to provide length and rotation. Additional information of aircraft, engine, make, model \u0026amp; dash number may be required.Note: General rule for installation: Tach cable should be installed as straight as possible - the inner cable length will decrease 11\/16\" per 360 degrees of bends.Available in left and right lay rotation. Add -R to the part number for Right Lay. 1. To determine cable rotation, note the rotation direction of the tach drive socket on the engine while looking directly at the tach drive on the engine. 2. If the drive socket rotates clockwise, a right lay inner cable is required. 3. If the drive socket rotates counter-clockwise, a left lay inner cable is required. 4. The rotation direction of the tach needle does not affect which lay should be used.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eManufacturer Part #:\u003c\/strong\u003e 15510-2160R\u003c\/p\u003e","brand":"ACS Products","offers":[{"title":"Default Title","offer_id":54255517729110,"sku":"10-03375-R","price":356.93,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1037\/0164\/3606\/files\/10-16900c_a18d4f80-423f-4797-8278-4b0de509d699.jpg?v=1781872256"},{"product_id":"10-03376","title":"Tachometer Cable 240 Left Lay","description":"\u003cp\u003eNote: General rule for installation: Tach cable should be installed as straight as possible - the inner cable length will decrease 11\/16\" per 360 degrees of bends.1. Select the proper length from the listing, but measure old tach cable to verify length in chart is correct for your aircraft, as tach cables can vary from aircraft to aircraft. Over-length cables can cause problems - order one that fits the installation. 2. Measure original cable from end of Ferrule to end of Ferrule when fully extended. 3. Inner tach cables are measured end to end. Inner assemblies have male ends only. One end is squared and the other is keyed. Tach cable assemblies have 7\/8-18 on one end and 5\/8-18 on the other, female nuts only.Note: Custom length tach and inner cables are available. Please contact sales for price and lead time of custom cable. You will be required to provide length and rotation. Additional information of aircraft, engine, make, model \u0026amp; dash number may be required.Note: General rule for installation: Tach cable should be installed as straight as possible - the inner cable length will decrease 11\/16\" per 360 degrees of bends.Available in left and right lay rotation. Add -R to the part number for Right Lay. 1. To determine cable rotation, note the rotation direction of the tach drive socket on the engine while looking directly at the tach drive on the engine. 2. If the drive socket rotates clockwise, a right lay inner cable is required. 3. If the drive socket rotates counter-clockwise, a left lay inner cable is required. 4. The rotation direction of the tach needle does not affect which lay should be used.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eManufacturer Part #:\u003c\/strong\u003e 15510-2400\u003c\/p\u003e","brand":"ACS Products","offers":[{"title":"Default Title","offer_id":54255517761878,"sku":"10-03376","price":379.33,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1037\/0164\/3606\/files\/10-16900c_dc513d1c-e06e-4672-b6da-bd167f057e54.jpg?v=1781872257"},{"product_id":"10-03376-r","title":"Tachometer Cable 240 Right Lay","description":"\u003cp\u003eNote: General rule for installation: Tach cable should be installed as straight as possible - the inner cable length will decrease 11\/16\" per 360 degrees of bends.1. Select the proper length from the listing, but measure old tach cable to verify length in chart is correct for your aircraft, as tach cables can vary from aircraft to aircraft. Over-length cables can cause problems - order one that fits the installation. 2. Measure original cable from end of Ferrule to end of Ferrule when fully extended. 3. Inner tach cables are measured end to end. Inner assemblies have male ends only. One end is squared and the other is keyed. Tach cable assemblies have 7\/8-18 on one end and 5\/8-18 on the other, female nuts only.Note: Custom length tach and inner cables are available. Please contact sales for price and lead time of custom cable. You will be required to provide length and rotation. Additional information of aircraft, engine, make, model \u0026amp; dash number may be required.Note: General rule for installation: Tach cable should be installed as straight as possible - the inner cable length will decrease 11\/16\" per 360 degrees of bends.Available in left and right lay rotation. Add -R to the part number for Right Lay. 1. To determine cable rotation, note the rotation direction of the tach drive socket on the engine while looking directly at the tach drive on the engine. 2. If the drive socket rotates clockwise, a right lay inner cable is required. 3. If the drive socket rotates counter-clockwise, a left lay inner cable is required. 4. The rotation direction of the tach needle does not affect which lay should be used.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eManufacturer Part #:\u003c\/strong\u003e 15510-2400R\u003c\/p\u003e","brand":"ACS Products","offers":[{"title":"Default Title","offer_id":54255517958486,"sku":"10-03376-R","price":379.33,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1037\/0164\/3606\/files\/10-16900c_d12ec527-1333-492a-a4c9-bb466ba551d6.jpg?v=1781872258"},{"product_id":"10-03377","title":"Tachometer Cable 228 Left Lay","description":"\u003cp\u003eNote: General rule for installation: Tach cable should be installed as straight as possible - the inner cable length will decrease 11\/16\" per 360 degrees of bends.1. Select the proper length from the listing, but measure old tach cable to verify length in chart is correct for your aircraft, as tach cables can vary from aircraft to aircraft. Over-length cables can cause problems - order one that fits the installation. 2. Measure original cable from end of Ferrule to end of Ferrule when fully extended. 3. Inner tach cables are measured end to end. Inner assemblies have male ends only. One end is squared and the other is keyed. Tach cable assemblies have 7\/8-18 on one end and 5\/8-18 on the other, female nuts only.Note: Custom length tach and inner cables are available. Please contact sales for price and lead time of custom cable. You will be required to provide length and rotation. Additional information of aircraft, engine, make, model \u0026amp; dash number may be required.Note: General rule for installation: Tach cable should be installed as straight as possible - the inner cable length will decrease 11\/16\" per 360 degrees of bends.Available in left and right lay rotation. Add -R to the part number for Right Lay. 1. To determine cable rotation, note the rotation direction of the tach drive socket on the engine while looking directly at the tach drive on the engine. 2. If the drive socket rotates clockwise, a right lay inner cable is required. 3. If the drive socket rotates counter-clockwise, a left lay inner cable is required. 4. The rotation direction of the tach needle does not affect which lay should be used.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eManufacturer Part #:\u003c\/strong\u003e 15510-2280\u003c\/p\u003e","brand":"ACS Products","offers":[{"title":"Default Title","offer_id":54255517991254,"sku":"10-03377","price":368.13,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1037\/0164\/3606\/files\/10-16900c_af4e90b2-0b40-4266-bc52-089dbae4982f.jpg?v=1781872260"},{"product_id":"10-03377-r","title":"Tachometer Cable 228 Right Lay","description":"\u003cp\u003eNote: General rule for installation: Tach cable should be installed as straight as possible - the inner cable length will decrease 11\/16\" per 360 degrees of bends.1. Select the proper length from the listing, but measure old tach cable to verify length in chart is correct for your aircraft, as tach cables can vary from aircraft to aircraft. Over-length cables can cause problems - order one that fits the installation. 2. Measure original cable from end of Ferrule to end of Ferrule when fully extended. 3. Inner tach cables are measured end to end. Inner assemblies have male ends only. One end is squared and the other is keyed. Tach cable assemblies have 7\/8-18 on one end and 5\/8-18 on the other, female nuts only.Note: Custom length tach and inner cables are available. Please contact sales for price and lead time of custom cable. You will be required to provide length and rotation. Additional information of aircraft, engine, make, model \u0026amp; dash number may be required.Note: General rule for installation: Tach cable should be installed as straight as possible - the inner cable length will decrease 11\/16\" per 360 degrees of bends.Available in left and right lay rotation. Add -R to the part number for Right Lay. 1. To determine cable rotation, note the rotation direction of the tach drive socket on the engine while looking directly at the tach drive on the engine. 2. If the drive socket rotates clockwise, a right lay inner cable is required. 3. If the drive socket rotates counter-clockwise, a left lay inner cable is required. 4. The rotation direction of the tach needle does not affect which lay should be used.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eManufacturer Part #:\u003c\/strong\u003e 15510-2280R\u003c\/p\u003e","brand":"ACS Products","offers":[{"title":"Default Title","offer_id":54255518024022,"sku":"10-03377-R","price":368.13,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1037\/0164\/3606\/files\/10-16900c_37e781c7-695b-42e8-98bb-dc92bd05c3c5.jpg?v=1781872262"},{"product_id":"10-03378","title":"Inner Tachometer Cable 60 Left Lay","description":"\u003cp\u003eNote: General rule for installation: Tach cable should be installed as straight as possible - the inner cable length will decrease 11\/16\" per 360 degrees of bends.1. Select the proper length from the listing, but measure old tach cable to verify length in chart is correct for your aircraft, as tach cables can vary from aircraft to aircraft. Over-length cables can cause problems - order one that fits the installation. 2. Measure original cable from end of Ferrule to end of Ferrule when fully extended. 3. Inner tach cables are measured end to end. Inner assemblies have male ends only. One end is squared and the other is keyed. Tach cable assemblies have 7\/8-18 on one end and 5\/8-18 on the other, female nuts only.Note: Custom length tach and inner cables are available. Please contact sales for price and lead time of custom cable. You will be required to provide length and rotation. Additional information of aircraft, engine, make, model \u0026amp; dash number may be required.Note: General rule for installation: Tach cable should be installed as straight as possible - the inner cable length will decrease 11\/16\" per 360 degrees of bends.Available in left and right lay rotation. Add -R to the part number for Right Lay. 1. To determine cable rotation, note the rotation direction of the tach drive socket on the engine while looking directly at the tach drive on the engine. 2. If the drive socket rotates clockwise, a right lay inner cable is required. 3. If the drive socket rotates counter-clockwise, a left lay inner cable is required. 4. The rotation direction of the tach needle does not affect which lay should be used.\u003c\/p\u003e","brand":"ACS Products","offers":[{"title":"Default Title","offer_id":54255518056790,"sku":"10-03378","price":60.9,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1037\/0164\/3606\/files\/10-22400a.jpg?v=1781872263"},{"product_id":"10-03380","title":"Inner Tachometer Cable 72 Left Lay","description":"\u003cp\u003eNote: General rule for installation: Tach cable should be installed as straight as possible - the inner cable length will decrease 11\/16\" per 360 degrees of bends.1. Select the proper length from the listing, but measure old tach cable to verify length in chart is correct for your aircraft, as tach cables can vary from aircraft to aircraft. Over-length cables can cause problems - order one that fits the installation. 2. Measure original cable from end of Ferrule to end of Ferrule when fully extended. 3. Inner tach cables are measured end to end. Inner assemblies have male ends only. One end is squared and the other is keyed. Tach cable assemblies have 7\/8-18 on one end and 5\/8-18 on the other, female nuts only.Note: Custom length tach and inner cables are available. Please contact sales for price and lead time of custom cable. You will be required to provide length and rotation. Additional information of aircraft, engine, make, model \u0026amp; dash number may be required.Note: General rule for installation: Tach cable should be installed as straight as possible - the inner cable length will decrease 11\/16\" per 360 degrees of bends.Available in left and right lay rotation. Add -R to the part number for Right Lay. 1. To determine cable rotation, note the rotation direction of the tach drive socket on the engine while looking directly at the tach drive on the engine. 2. If the drive socket rotates clockwise, a right lay inner cable is required. 3. If the drive socket rotates counter-clockwise, a left lay inner cable is required. 4. The rotation direction of the tach needle does not affect which lay should be used.\u003c\/p\u003e","brand":"ACS Products","offers":[{"title":"Default Title","offer_id":54255518613846,"sku":"10-03380","price":73.85,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1037\/0164\/3606\/files\/10-22400a_f6ecfc7c-027d-450e-83a9-de9cab2ad487.jpg?v=1781872265"},{"product_id":"10-03378-r","title":"Inner Tachometer Cable 60 Right Lay","description":"\u003cp\u003eNote: General rule for installation: Tach cable should be installed as straight as possible - the inner cable length will decrease 11\/16\" per 360 degrees of bends.1. Select the proper length from the listing, but measure old tach cable to verify length in chart is correct for your aircraft, as tach cables can vary from aircraft to aircraft. Over-length cables can cause problems - order one that fits the installation. 2. Measure original cable from end of Ferrule to end of Ferrule when fully extended. 3. Inner tach cables are measured end to end. Inner assemblies have male ends only. One end is squared and the other is keyed. Tach cable assemblies have 7\/8-18 on one end and 5\/8-18 on the other, female nuts only.Note: Custom length tach and inner cables are available. Please contact sales for price and lead time of custom cable. You will be required to provide length and rotation. Additional information of aircraft, engine, make, model \u0026amp; dash number may be required.Note: General rule for installation: Tach cable should be installed as straight as possible - the inner cable length will decrease 11\/16\" per 360 degrees of bends.Available in left and right lay rotation. Add -R to the part number for Right Lay. 1. To determine cable rotation, note the rotation direction of the tach drive socket on the engine while looking directly at the tach drive on the engine. 2. If the drive socket rotates clockwise, a right lay inner cable is required. 3. If the drive socket rotates counter-clockwise, a left lay inner cable is required. 4. The rotation direction of the tach needle does not affect which lay should be used.\u003c\/p\u003e","brand":"ACS Products","offers":[{"title":"Default Title","offer_id":54255519629654,"sku":"10-03378-R","price":60.9,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1037\/0164\/3606\/files\/10-22400a_2cd52225-1044-4847-a2f2-f86da3352446.jpg?v=1781872266"},{"product_id":"10-03380-r","title":"Inner Tachometer Cable 72 Right Lay","description":"\u003cp\u003eNote: General rule for installation: Tach cable should be installed as straight as possible - the inner cable length will decrease 11\/16\" per 360 degrees of bends.1. Select the proper length from the listing, but measure old tach cable to verify length in chart is correct for your aircraft, as tach cables can vary from aircraft to aircraft. Over-length cables can cause problems - order one that fits the installation. 2. Measure original cable from end of Ferrule to end of Ferrule when fully extended. 3. Inner tach cables are measured end to end. Inner assemblies have male ends only. One end is squared and the other is keyed. Tach cable assemblies have 7\/8-18 on one end and 5\/8-18 on the other, female nuts only.Note: Custom length tach and inner cables are available. Please contact sales for price and lead time of custom cable. You will be required to provide length and rotation. Additional information of aircraft, engine, make, model \u0026amp; dash number may be required.Note: General rule for installation: Tach cable should be installed as straight as possible - the inner cable length will decrease 11\/16\" per 360 degrees of bends.Available in left and right lay rotation. Add -R to the part number for Right Lay. 1. To determine cable rotation, note the rotation direction of the tach drive socket on the engine while looking directly at the tach drive on the engine. 2. If the drive socket rotates clockwise, a right lay inner cable is required. 3. If the drive socket rotates counter-clockwise, a left lay inner cable is required. 4. The rotation direction of the tach needle does not affect which lay should be used.\u003c\/p\u003e","brand":"ACS Products","offers":[{"title":"Default Title","offer_id":54255519695190,"sku":"10-03380-R","price":65.17,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1037\/0164\/3606\/files\/10-22400a_6e482aef-4903-446b-8faa-879bac60a9f1.jpg?v=1781872267"},{"product_id":"10-03381","title":"Inner Tachometer Cable 84 Left Lay","description":"\u003cp\u003eNote: General rule for installation: Tach cable should be installed as straight as possible - the inner cable length will decrease 11\/16\" per 360 degrees of bends.1. Select the proper length from the listing, but measure old tach cable to verify length in chart is correct for your aircraft, as tach cables can vary from aircraft to aircraft. Over-length cables can cause problems - order one that fits the installation. 2. Measure original cable from end of Ferrule to end of Ferrule when fully extended. 3. Inner tach cables are measured end to end. Inner assemblies have male ends only. One end is squared and the other is keyed. Tach cable assemblies have 7\/8-18 on one end and 5\/8-18 on the other, female nuts only.Note: Custom length tach and inner cables are available. Please contact sales for price and lead time of custom cable. You will be required to provide length and rotation. Additional information of aircraft, engine, make, model \u0026amp; dash number may be required.Note: General rule for installation: Tach cable should be installed as straight as possible - the inner cable length will decrease 11\/16\" per 360 degrees of bends.Available in left and right lay rotation. Add -R to the part number for Right Lay. 1. To determine cable rotation, note the rotation direction of the tach drive socket on the engine while looking directly at the tach drive on the engine. 2. If the drive socket rotates clockwise, a right lay inner cable is required. 3. If the drive socket rotates counter-clockwise, a left lay inner cable is required. 4. The rotation direction of the tach needle does not affect which lay should be used.\u003c\/p\u003e","brand":"ACS Products","offers":[{"title":"Default Title","offer_id":54255519891798,"sku":"10-03381","price":73.85,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1037\/0164\/3606\/files\/10-22400a_9c6577bf-af0b-48e5-8c30-e9124e8375dc.jpg?v=1781872269"},{"product_id":"10-03381-r","title":"Inner Tachometer Cable 84 Right Lay","description":"\u003cp\u003eNote: General rule for installation: Tach cable should be installed as straight as possible - the inner cable length will decrease 11\/16\" per 360 degrees of bends.1. Select the proper length from the listing, but measure old tach cable to verify length in chart is correct for your aircraft, as tach cables can vary from aircraft to aircraft. Over-length cables can cause problems - order one that fits the installation. 2. Measure original cable from end of Ferrule to end of Ferrule when fully extended. 3. Inner tach cables are measured end to end. Inner assemblies have male ends only. One end is squared and the other is keyed. Tach cable assemblies have 7\/8-18 on one end and 5\/8-18 on the other, female nuts only.Note: Custom length tach and inner cables are available. Please contact sales for price and lead time of custom cable. You will be required to provide length and rotation. Additional information of aircraft, engine, make, model \u0026amp; dash number may be required.Note: General rule for installation: Tach cable should be installed as straight as possible - the inner cable length will decrease 11\/16\" per 360 degrees of bends.Available in left and right lay rotation. Add -R to the part number for Right Lay. 1. To determine cable rotation, note the rotation direction of the tach drive socket on the engine while looking directly at the tach drive on the engine. 2. If the drive socket rotates clockwise, a right lay inner cable is required. 3. If the drive socket rotates counter-clockwise, a left lay inner cable is required. 4. The rotation direction of the tach needle does not affect which lay should be used.\u003c\/p\u003e","brand":"ACS Products","offers":[{"title":"Default Title","offer_id":54255519924566,"sku":"10-03381-R","price":72.66,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1037\/0164\/3606\/files\/10-22400a_3d3b30fb-08fb-490b-bc62-87b70c517686.jpg?v=1781872271"},{"product_id":"10-03382","title":"Inner Tachometer Cable 96 Left Lay","description":"\u003cp\u003eNote: General rule for installation: Tach cable should be installed as straight as possible - the inner cable length will decrease 11\/16\" per 360 degrees of bends.1. Select the proper length from the listing, but measure old tach cable to verify length in chart is correct for your aircraft, as tach cables can vary from aircraft to aircraft. Over-length cables can cause problems - order one that fits the installation. 2. Measure original cable from end of Ferrule to end of Ferrule when fully extended. 3. Inner tach cables are measured end to end. Inner assemblies have male ends only. One end is squared and the other is keyed. Tach cable assemblies have 7\/8-18 on one end and 5\/8-18 on the other, female nuts only.Note: Custom length tach and inner cables are available. Please contact sales for price and lead time of custom cable. You will be required to provide length and rotation. Additional information of aircraft, engine, make, model \u0026amp; dash number may be required.Note: General rule for installation: Tach cable should be installed as straight as possible - the inner cable length will decrease 11\/16\" per 360 degrees of bends.Available in left and right lay rotation. Add -R to the part number for Right Lay. 1. To determine cable rotation, note the rotation direction of the tach drive socket on the engine while looking directly at the tach drive on the engine. 2. If the drive socket rotates clockwise, a right lay inner cable is required. 3. If the drive socket rotates counter-clockwise, a left lay inner cable is required. 4. The rotation direction of the tach needle does not affect which lay should be used.\u003c\/p\u003e","brand":"ACS Products","offers":[{"title":"Default Title","offer_id":54255519957334,"sku":"10-03382","price":72.45,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1037\/0164\/3606\/files\/10-22400a_b59a8ec9-ea85-450a-8598-f69d6aedbaa2.jpg?v=1781872272"},{"product_id":"10-03382-r","title":"Inner Tachometer Cable 96 Right Lay","description":"\u003cp\u003eNote: General rule for installation: Tach cable should be installed as straight as possible - the inner cable length will decrease 11\/16\" per 360 degrees of bends.1. Select the proper length from the listing, but measure old tach cable to verify length in chart is correct for your aircraft, as tach cables can vary from aircraft to aircraft. Over-length cables can cause problems - order one that fits the installation. 2. Measure original cable from end of Ferrule to end of Ferrule when fully extended. 3. Inner tach cables are measured end to end. Inner assemblies have male ends only. One end is squared and the other is keyed. Tach cable assemblies have 7\/8-18 on one end and 5\/8-18 on the other, female nuts only.Note: Custom length tach and inner cables are available. Please contact sales for price and lead time of custom cable. You will be required to provide length and rotation. Additional information of aircraft, engine, make, model \u0026amp; dash number may be required.Note: General rule for installation: Tach cable should be installed as straight as possible - the inner cable length will decrease 11\/16\" per 360 degrees of bends.Available in left and right lay rotation. Add -R to the part number for Right Lay. 1. To determine cable rotation, note the rotation direction of the tach drive socket on the engine while looking directly at the tach drive on the engine. 2. If the drive socket rotates clockwise, a right lay inner cable is required. 3. If the drive socket rotates counter-clockwise, a left lay inner cable is required. 4. The rotation direction of the tach needle does not affect which lay should be used.\u003c\/p\u003e","brand":"ACS Products","offers":[{"title":"Default Title","offer_id":54255520022870,"sku":"10-03382-R","price":78.19,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1037\/0164\/3606\/files\/10-22400a_4ffec70b-f6b1-423a-9615-308261525d6a.jpg?v=1781872273"},{"product_id":"10-03383","title":"Inner Tachometer Cable 108 Left Lay","description":"\u003cp\u003eNote: General rule for installation: Tach cable should be installed as straight as possible - the inner cable length will decrease 11\/16\" per 360 degrees of bends.1. Select the proper length from the listing, but measure old tach cable to verify length in chart is correct for your aircraft, as tach cables can vary from aircraft to aircraft. Over-length cables can cause problems - order one that fits the installation. 2. Measure original cable from end of Ferrule to end of Ferrule when fully extended. 3. Inner tach cables are measured end to end. Inner assemblies have male ends only. One end is squared and the other is keyed. Tach cable assemblies have 7\/8-18 on one end and 5\/8-18 on the other, female nuts only.Note: Custom length tach and inner cables are available. Please contact sales for price and lead time of custom cable. You will be required to provide length and rotation. Additional information of aircraft, engine, make, model \u0026amp; dash number may be required.Note: General rule for installation: Tach cable should be installed as straight as possible - the inner cable length will decrease 11\/16\" per 360 degrees of bends.Available in left and right lay rotation. Add -R to the part number for Right Lay. 1. To determine cable rotation, note the rotation direction of the tach drive socket on the engine while looking directly at the tach drive on the engine. 2. If the drive socket rotates clockwise, a right lay inner cable is required. 3. If the drive socket rotates counter-clockwise, a left lay inner cable is required. 4. The rotation direction of the tach needle does not affect which lay should be used.\u003c\/p\u003e","brand":"ACS Products","offers":[{"title":"Default Title","offer_id":54255520055638,"sku":"10-03383","price":83.65,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1037\/0164\/3606\/files\/10-22400a_1f7d62b1-e534-44a5-929a-db697382ecc5.jpg?v=1781872275"},{"product_id":"10-03383-r","title":"Inner Tachometer Cable 108 Right Lay","description":"\u003cp\u003eNote: General rule for installation: Tach cable should be installed as straight as possible - the inner cable length will decrease 11\/16\" per 360 degrees of bends.1. Select the proper length from the listing, but measure old tach cable to verify length in chart is correct for your aircraft, as tach cables can vary from aircraft to aircraft. Over-length cables can cause problems - order one that fits the installation. 2. Measure original cable from end of Ferrule to end of Ferrule when fully extended. 3. Inner tach cables are measured end to end. Inner assemblies have male ends only. One end is squared and the other is keyed. Tach cable assemblies have 7\/8-18 on one end and 5\/8-18 on the other, female nuts only.Note: Custom length tach and inner cables are available. Please contact sales for price and lead time of custom cable. You will be required to provide length and rotation. Additional information of aircraft, engine, make, model \u0026amp; dash number may be required.Note: General rule for installation: Tach cable should be installed as straight as possible - the inner cable length will decrease 11\/16\" per 360 degrees of bends.Available in left and right lay rotation. Add -R to the part number for Right Lay. 1. To determine cable rotation, note the rotation direction of the tach drive socket on the engine while looking directly at the tach drive on the engine. 2. If the drive socket rotates clockwise, a right lay inner cable is required. 3. If the drive socket rotates counter-clockwise, a left lay inner cable is required. 4. The rotation direction of the tach needle does not affect which lay should be used.\u003c\/p\u003e","brand":"ACS Products","offers":[{"title":"Default Title","offer_id":54255520416086,"sku":"10-03383-R","price":80.85,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1037\/0164\/3606\/files\/10-22400a_054cc2cb-d714-4940-b4ba-4aa7c8b932cf.jpg?v=1781872276"}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1037\/0164\/3606\/collections\/logoacsproducts.jpg?v=1781650035","url":"https:\/\/www.aircraftpartseurope.com\/collections\/acs-products.oembed","provider":"Aircraft Parts Europe","version":"1.0","type":"link"}