{"title":"Epoxy","description":"\u003cp\u003eEpoxy — part of our Composite Materials range. Quality aircraft parts delivered across the UK and Europe.\u003c\/p\u003e","products":[{"product_id":"01-00160","title":"Aeropoxy PH3630 Hardnr 1 Pint","description":"\u003cp\u003ePR2032 is a medium viscosity, unfilled, light amber laminating resin that is designed for structural production applications. Three hardeners are available for use with PR2032. PH3660, has a 1-hour pot life. When used with either of these hardeners, the system gives excellent wet-out of fiberglass, carbon and aramid fibers. Special additives have been incorporated into this system to promote chemical adhesion to fabrics made with these fibers. The AEROPOXY systems will cure completely at room temperature, or can be given an elevated temperature cure. AEROPOXY contains no MDA (a known liver toxin and carcinogen) and meets or exceeds current OSHA requirements for safe use. It satisfies all structural, pot life and wet-out characteristics according to tests by Rutan Aircraft Factory, and RAF recommended its use for all homebuilt aircraft applications. The best ratio on AEROPOXY is 100:27 by weight or 3 to 1 by volume. In early 1996 several improvements were made to AEROPOXY. The viscosity was lowered for easier laminating, the occasional slight surface tackiness in high humidity was eliminated, the AEROPOXY hardeners were modified to prevent any tendency to crystallize in high humidity, and the mix ratios were modified to an exact 3 to 1 by volume.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eManufacturer Part #:\u003c\/strong\u003e PH3630\u003c\/p\u003e","brand":"Aircraft Spruce","offers":[{"title":"Default Title","offer_id":54219799200086,"sku":"01-00160","price":37.52,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1037\/0164\/3606\/files\/01-00160.jpg?v=1781651196"},{"product_id":"01-00161","title":"Aeropoxy PH3630 Hardnr 1 Quart","description":"\u003cp\u003ePR2032 is a medium viscosity, unfilled, light amber laminating resin that is designed for structural production applications. Three hardeners are available for use with PR2032. PH3660, has a 1-hour pot life. When used with either of these hardeners, the system gives excellent wet-out of fiberglass, carbon and aramid fibers. Special additives have been incorporated into this system to promote chemical adhesion to fabrics made with these fibers. The AEROPOXY systems will cure completely at room temperature, or can be given an elevated temperature cure. AEROPOXY contains no MDA (a known liver toxin and carcinogen) and meets or exceeds current OSHA requirements for safe use. It satisfies all structural, pot life and wet-out characteristics according to tests by Rutan Aircraft Factory, and RAF recommended its use for all homebuilt aircraft applications. The best ratio on AEROPOXY is 100:27 by weight or 3 to 1 by volume. In early 1996 several improvements were made to AEROPOXY. The viscosity was lowered for easier laminating, the occasional slight surface tackiness in high humidity was eliminated, the AEROPOXY hardeners were modified to prevent any tendency to crystallize in high humidity, and the mix ratios were modified to an exact 3 to 1 by volume.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eManufacturer Part #:\u003c\/strong\u003e PH3630\u003c\/p\u003e","brand":"Aircraft Spruce","offers":[{"title":"Default Title","offer_id":54219799724374,"sku":"01-00161","price":97.86,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1037\/0164\/3606\/files\/01-00161.jpg?v=1781651197"},{"product_id":"01-00162","title":"Aeropoxy PH3665 Hardnr 1 Pt","description":"\u003cp\u003ePR2032 is a medium viscosity, unfilled, light amber laminating resin that is designed for structural production applications. Three hardeners are available for use with PR2032. PH3660, has a 1-hour pot life. When used with either of these hardeners, the system gives excellent wet-out of fiberglass, carbon and aramid fibers. Special additives have been incorporated into this system to promote chemical adhesion to fabrics made with these fibers. The AEROPOXY systems will cure completely at room temperature, or can be given an elevated temperature cure. AEROPOXY contains no MDA (a known liver toxin and carcinogen) and meets or exceeds current OSHA requirements for safe use. It satisfies all structural, pot life and wet-out characteristics according to tests by Rutan Aircraft Factory, and RAF recommended its use for all homebuilt aircraft applications. The best ratio on AEROPOXY is 100:27 by weight or 3 to 1 by volume. In early 1996 several improvements were made to AEROPOXY. The viscosity was lowered for easier laminating, the occasional slight surface tackiness in high humidity was eliminated, the AEROPOXY hardeners were modified to prevent any tendency to crystallize in high humidity, and the mix ratios were modified to an exact 3 to 1 by volume.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eManufacturer Part #:\u003c\/strong\u003e PH3665\u003c\/p\u003e","brand":"Aircraft Spruce","offers":[{"title":"Default Title","offer_id":54219800117590,"sku":"01-00162","price":37.1,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1037\/0164\/3606\/files\/01-00162.jpg?v=1781651199"},{"product_id":"01-00163","title":"Aeropoxy PH3665 Hardener Quart","description":"\u003cp\u003ePR2032 is a medium viscosity, unfilled, light amber laminating resin that is designed for structural production applications. Three hardeners are available for use with PR2032. PH3660, has a 1-hour pot life. When used with either of these hardeners, the system gives excellent wet-out of fiberglass, carbon and aramid fibers. Special additives have been incorporated into this system to promote chemical adhesion to fabrics made with these fibers. The AEROPOXY systems will cure completely at room temperature, or can be given an elevated temperature cure. AEROPOXY contains no MDA (a known liver toxin and carcinogen) and meets or exceeds current OSHA requirements for safe use. It satisfies all structural, pot life and wet-out characteristics according to tests by Rutan Aircraft Factory, and RAF recommended its use for all homebuilt aircraft applications. The best ratio on AEROPOXY is 100:27 by weight or 3 to 1 by volume. In early 1996 several improvements were made to AEROPOXY. The viscosity was lowered for easier laminating, the occasional slight surface tackiness in high humidity was eliminated, the AEROPOXY hardeners were modified to prevent any tendency to crystallize in high humidity, and the mix ratios were modified to an exact 3 to 1 by volume.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eManufacturer Part #:\u003c\/strong\u003e PH3665\u003c\/p\u003e","brand":"Aircraft Spruce","offers":[{"title":"Default Title","offer_id":54219800281430,"sku":"01-00163","price":97.93,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1037\/0164\/3606\/files\/01-00163.jpg?v=1781651200"},{"product_id":"01-00361","title":"West System 206-C Slow Hardener - 1 Gallon","description":"\u003cp\u003eWEST SYSTEM brand resins and hardeners, form a two-part epoxy system developed by Gougeon Brothers specifically for wood and composite construction. WEST SYSTEM epoxy is recommended by Rutan Aircraft Factory for certain homebuilt aircraft applications, particularly where a moisture resistant epoxy is desired. 105 Resin is the base material on which all of the WEST SYSTEM epoxy systems are built. The resin is a clear, light amber, low-viscosity liquid. It is designed specifically to wet out wood fiber. With roller applications, it possesses excellent thin film characteristics in flowing out and is self-leveling without fish-eyeing. Its relatively high flash point makes it safer to work with than polyesters. It can be cured in a wide temperature range, then sanded and shaped. It cures quite clear so that the natural finish shines through. 205 Fast Hardener, when mixed with the 105 Resin in a ratio of 5 parts Resin to 1 part Hardener, yields a high-strength, rigid solid with excellent cohesive properties and provides an excellent moisture vapor barrier. The 105 Resin\/205 Fast Hardener has a pot life of 10-15 minutes at 70°F. It is also recommended in coating applications where natural finishing is desired. Partial cure time at 70°F is 5-7 hours. 206 Slow Hardener is a low-viscosity mixture of polyamines. The 105 Resin\/206 Slow Hardener has a pot life of 30-40 minutes at 70°F. It is normally used when extended time is needed for large coating and bonding applications. It is especially well suited to working in warmer climates. Partial cure time is 9 hours at 70°F. Order by size and hardener. Pump sold separately.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eManufacturer Part #:\u003c\/strong\u003e 323758\u003c\/p\u003e","brand":"Aircraft Spruce","offers":[{"title":"Default Title","offer_id":54219804180822,"sku":"01-00361","price":274.05,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1037\/0164\/3606\/files\/01-00361.jpg?v=1781651266"},{"product_id":"01-00364","title":"West System 209-Sb Extra Slow Hardener - 1 Gallon","description":"\u003cp\u003eWEST SYSTEM brand resins and hardeners, form a two-part epoxy system developed by Gougeon Brothers specifically for wood and composite construction. WEST SYSTEM epoxy is recommended by Rutan Aircraft Factory for certain homebuilt aircraft applications, particularly where a moisture resistant epoxy is desired. 105 Resin is the base material on which all of the WEST SYSTEM epoxy systems are built. The resin is a clear, light amber, low-viscosity liquid. It is designed specifically to wet out wood fiber. With roller applications, it possesses excellent thin film characteristics in flowing out and is self-leveling without fish-eyeing. Its relatively high flash point makes it safer to work with than polyesters. It can be cured in a wide temperature range, then sanded and shaped. It cures quite clear so that the natural finish shines through. 205 Fast Hardener, when mixed with the 105 Resin in a ratio of 5 parts Resin to 1 part Hardener, yields a high-strength, rigid solid with excellent cohesive properties and provides an excellent moisture vapor barrier. The 105 Resin\/205 Fast Hardener has a pot life of 10-15 minutes at 70°F. It is also recommended in coating applications where natural finishing is desired. Partial cure time at 70°F is 5-7 hours. 206 Slow Hardener is a low-viscosity mixture of polyamines. The 105 Resin\/206 Slow Hardener has a pot life of 30-40 minutes at 70°F. It is normally used when extended time is needed for large coating and bonding applications. It is especially well suited to working in warmer climates. Partial cure time is 9 hours at 70°F. Order by size and hardener. Pump sold separately.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eManufacturer Part #:\u003c\/strong\u003e 372953\u003c\/p\u003e","brand":"Aircraft Spruce","offers":[{"title":"Default Title","offer_id":54219804344662,"sku":"01-00364","price":159.15,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1037\/0164\/3606\/files\/01-00364a.jpg?v=1781651270"},{"product_id":"01-00414","title":"ES-6228 Aeropoxy Gallon Kit","description":"\u003cp\u003eES6228 is a thin paste viscosity epoxy adhesive designed to provide good bonds to metal surfaces. A unique feature of ES6228 is its ability to bond to slightly oily metal surfaces. this is useful in situations where the complete removal of residual mill oil on metal surfaces is not possible. The thin paste consistency of ES6228 wets the metal surface well, for good adhesion. this viscosity also provides some gap filling capabilities, so \"close-fitting\" joints are adequate, and matched-metal joints are not required. ES6228 has a 1 to 1 mix ratio, by weight or volume, for easy measuring. The white resin and black hardener combine to a smooth gray system that is easy to mix and apply. The cured material has very good properties, with high bond strength and elongation, for tough, durable assemblies.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eManufacturer Part #:\u003c\/strong\u003e ES-6228\u003c\/p\u003e","brand":"Aircraft Spruce","offers":[{"title":"Default Title","offer_id":54219804410198,"sku":"01-00414","price":516.6,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1037\/0164\/3606\/files\/aeropoxylogo.jpg?v=1781651271"},{"product_id":"01-00415","title":"ES-6228 Aeropoxy Quart Kit","description":"\u003cp\u003eES6228 is a thin paste viscosity epoxy adhesive designed to provide good bonds to metal surfaces. A unique feature of ES6228 is its ability to bond to slightly oily metal surfaces. this is useful in situations where the complete removal of residual mill oil on metal surfaces is not possible. The thin paste consistency of ES6228 wets the metal surface well, for good adhesion. this viscosity also provides some gap filling capabilities, so \"close-fitting\" joints are adequate, and matched-metal joints are not required. ES6228 has a 1 to 1 mix ratio, by weight or volume, for easy measuring. The white resin and black hardener combine to a smooth gray system that is easy to mix and apply. The cured material has very good properties, with high bond strength and elongation, for tough, durable assemblies.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eManufacturer Part #:\u003c\/strong\u003e ES6228\u003c\/p\u003e","brand":"Aircraft Spruce","offers":[{"title":"Default Title","offer_id":54219804508502,"sku":"01-00415","price":159.25,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1037\/0164\/3606\/files\/01-00415a.jpg?v=1781651272"},{"product_id":"01-01059","title":"Rhino 1307 Lv Resin 55 Gal","description":"\u003cp\u003e1307 Low Viscosity Resin \/ H-3102 Fast Epoxy Hardener - 100% solids two component epoxy laminating system with excellent wet out, low viscosity and high strength. Very low odor and toxicity. Easy to use, Mix Ratio: 4:1 by volume; 100:22 by weight. Gel Time: 12-15 minutes @ 77°F (150 grams). Fast curing products for a variety of use applications. Used for fast curing, penetrating wood coatings, adhesives and sealers, fiberglass laminating and microsphere filled fairing compounds. Excellent cold temperature cures down to 40 degrees F. No solvents or VOCs. Non-hazardous, non-corrosive hardener. H-3176 30-minute Medium R\/T Epoxy Hardener- Safety Press Molding Epoxy Hardner. Good low temperature cure. Fast wetting of fiberglass reinforcements. Easy to use 4:1 mix ratio by volume; 100:22 by weight. Gel time: 25-30 minutes @ 77°F (150 grams). High HDT at room temp, increasing with post cure. Low toxicity, very low odor. Non-hazmat.\u003c\/p\u003e","brand":"Aircraft Spruce","offers":[{"title":"Default Title","offer_id":54219818795350,"sku":"01-01059","price":7970.2,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1037\/0164\/3606\/files\/jeffco.jpg?v=1781651474"},{"product_id":"01-01210","title":"Pro-Set Hardener Lam 237-1 1.49 Gallon","description":"\u003cp\u003eNote: This is the NEW 2013 Formula. NOT compatible with original formula.LAM-125 ResinLAM-125 Low Viscosity Laminating Resin LAM-229 HardenerLAM-229 Slow Laminating Hardener Low viscosity for quick wet out of synthetic composite fabrics; especially effective with Kevlar and carbon fiber.Slow cure speed hardener provides 4 to 5 hours working time at 77°F (25°C). A typical laminate will be gelled in 6 to 7 hours.Optimized for hand wet out and machine impregnation in contact molding, vacuumbagging and Light RTM applications.Room temperature cure properties suitable for many composite components andstructures.Tg as high as 197° F (92°C) with proper post cure providing excellent temperature stability and great part cosmetics.Cost Effective - High Performance Epoxy formulation for synthetic compositemanufacturing.135 ResinLAM-135 Medium Viscosity Laminating Resin 226 HardenerLAM-226 Medium Laminating Hardener Medium viscosity for good wet out of all synthetic composite fabrics and corematerials.Medium cure speed hardener provides 2 to 3 hours of working time at 77°F (25°C). A typical laminate will be gelled in 4 to 5 hours.Optimized for hand wet out and machine impregnation in contact molding, vacuumbagging and filament winding applications.Excellent for taping and tabbing operations in composite structure assembly.Room temperature cure properties suitable for many composite components andstructures.Tg as high as 214° F (101°C) with proper post cure providing excellent temperature stability and great part cosmetics.Cost Effective - High Performance Epoxy formulation for synthetic compositemanufacturing. 135 ResinLAM-135 Medium Viscosity Laminating Resin 237 HardenerLAM-237 Extra Slow Laminating Hardener Medium viscosity for good wet out of all synthetic composite fabrics and corematerials.Extra Slow cure speed hardener provides 7 to 8 hours of working time at 77°F (25°C). A typical laminate will be gelled in 12 to 14 hours.Optimized for hand wet out and machine impregnation in contact molding, vacuumbagging and filament winding applications.Room temperature cure properties suitable for many composite components andstructures.Tg as high as 213° F (101°C) with proper post cure providing excellent temperature stability and great part cosmetics.Cost Effective - High Performance Epoxy formulation for synthetic compositemanufacturing.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eManufacturer Part #:\u003c\/strong\u003e 81LAM237-1\u003c\/p\u003e","brand":"Aircraft Spruce","offers":[{"title":"Default Title","offer_id":54219821154646,"sku":"01-01210","price":331.73,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1037\/0164\/3606\/files\/prosetlogo.jpg?v=1781651515"},{"product_id":"01-01221","title":"Pro-Set Resin Lam 125-1","description":"\u003cp\u003eNote: This is the NEW 2013 Formula. NOT compatible with original formula.LAM-125 ResinLAM-125 Low Viscosity Laminating Resin LAM-229 HardenerLAM-229 Slow Laminating Hardener Low viscosity for quick wet out of synthetic composite fabrics; especially effective with Kevlar and carbon fiber.Slow cure speed hardener provides 4 to 5 hours working time at 77°F (25°C). A typical laminate will be gelled in 6 to 7 hours.Optimized for hand wet out and machine impregnation in contact molding, vacuumbagging and Light RTM applications.Room temperature cure properties suitable for many composite components andstructures.Tg as high as 197° F (92°C) with proper post cure providing excellent temperature stability and great part cosmetics.Cost Effective - High Performance Epoxy formulation for synthetic compositemanufacturing.135 ResinLAM-135 Medium Viscosity Laminating Resin 226 HardenerLAM-226 Medium Laminating Hardener Medium viscosity for good wet out of all synthetic composite fabrics and corematerials.Medium cure speed hardener provides 2 to 3 hours of working time at 77°F (25°C). A typical laminate will be gelled in 4 to 5 hours.Optimized for hand wet out and machine impregnation in contact molding, vacuumbagging and filament winding applications.Excellent for taping and tabbing operations in composite structure assembly.Room temperature cure properties suitable for many composite components andstructures.Tg as high as 214° F (101°C) with proper post cure providing excellent temperature stability and great part cosmetics.Cost Effective - High Performance Epoxy formulation for synthetic compositemanufacturing. 135 ResinLAM-135 Medium Viscosity Laminating Resin 237 HardenerLAM-237 Extra Slow Laminating Hardener Medium viscosity for good wet out of all synthetic composite fabrics and corematerials.Extra Slow cure speed hardener provides 7 to 8 hours of working time at 77°F (25°C). A typical laminate will be gelled in 12 to 14 hours.Optimized for hand wet out and machine impregnation in contact molding, vacuumbagging and filament winding applications.Room temperature cure properties suitable for many composite components andstructures.Tg as high as 213° F (101°C) with proper post cure providing excellent temperature stability and great part cosmetics.Cost Effective - High Performance Epoxy formulation for synthetic compositemanufacturing.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eManufacturer Part #:\u003c\/strong\u003e 81LAM125-1\u003c\/p\u003e","brand":"Aircraft Spruce","offers":[{"title":"Default Title","offer_id":54219821449558,"sku":"01-01221","price":218.05,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1037\/0164\/3606\/files\/prosetlogo_dc176316-6793-4554-b857-86cab027a544.jpg?v=1781651520"},{"product_id":"01-01222","title":"Pro-Set Slow Hardener Lam 229-1 1\/3 Gal","description":"\u003cp\u003eNote: This is the NEW 2013 Formula. NOT compatible with original formula.LAM-125 ResinLAM-125 Low Viscosity Laminating Resin LAM-229 HardenerLAM-229 Slow Laminating Hardener Low viscosity for quick wet out of synthetic composite fabrics; especially effective with Kevlar and carbon fiber.Slow cure speed hardener provides 4 to 5 hours working time at 77°F (25°C). A typical laminate will be gelled in 6 to 7 hours.Optimized for hand wet out and machine impregnation in contact molding, vacuumbagging and Light RTM applications.Room temperature cure properties suitable for many composite components andstructures.Tg as high as 197° F (92°C) with proper post cure providing excellent temperature stability and great part cosmetics.Cost Effective - High Performance Epoxy formulation for synthetic compositemanufacturing.135 ResinLAM-135 Medium Viscosity Laminating Resin 226 HardenerLAM-226 Medium Laminating Hardener Medium viscosity for good wet out of all synthetic composite fabrics and corematerials.Medium cure speed hardener provides 2 to 3 hours of working time at 77°F (25°C). A typical laminate will be gelled in 4 to 5 hours.Optimized for hand wet out and machine impregnation in contact molding, vacuumbagging and filament winding applications.Excellent for taping and tabbing operations in composite structure assembly.Room temperature cure properties suitable for many composite components andstructures.Tg as high as 214° F (101°C) with proper post cure providing excellent temperature stability and great part cosmetics.Cost Effective - High Performance Epoxy formulation for synthetic compositemanufacturing. 135 ResinLAM-135 Medium Viscosity Laminating Resin 237 HardenerLAM-237 Extra Slow Laminating Hardener Medium viscosity for good wet out of all synthetic composite fabrics and corematerials.Extra Slow cure speed hardener provides 7 to 8 hours of working time at 77°F (25°C). A typical laminate will be gelled in 12 to 14 hours.Optimized for hand wet out and machine impregnation in contact molding, vacuumbagging and filament winding applications.Room temperature cure properties suitable for many composite components andstructures.Tg as high as 213° F (101°C) with proper post cure providing excellent temperature stability and great part cosmetics.Cost Effective - High Performance Epoxy formulation for synthetic compositemanufacturing.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eManufacturer Part #:\u003c\/strong\u003e 81LAM229-1\u003c\/p\u003e","brand":"Aircraft Spruce","offers":[{"title":"Default Title","offer_id":54219821515094,"sku":"01-01222","price":213.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1037\/0164\/3606\/files\/prosetlogo_fde6e452-ed50-4f8f-92c4-3bc4b0e0b753.jpg?v=1781651521"},{"product_id":"01-01223","title":"Pro-Set Resin Lam 135-1 Gallon","description":"\u003cp\u003eNote: This is the NEW 2013 Formula. NOT compatible with original formula.LAM-125 ResinLAM-125 Low Viscosity Laminating Resin LAM-229 HardenerLAM-229 Slow Laminating Hardener Low viscosity for quick wet out of synthetic composite fabrics; especially effective with Kevlar and carbon fiber.Slow cure speed hardener provides 4 to 5 hours working time at 77°F (25°C). A typical laminate will be gelled in 6 to 7 hours.Optimized for hand wet out and machine impregnation in contact molding, vacuumbagging and Light RTM applications.Room temperature cure properties suitable for many composite components andstructures.Tg as high as 197° F (92°C) with proper post cure providing excellent temperature stability and great part cosmetics.Cost Effective - High Performance Epoxy formulation for synthetic compositemanufacturing.135 ResinLAM-135 Medium Viscosity Laminating Resin 226 HardenerLAM-226 Medium Laminating Hardener Medium viscosity for good wet out of all synthetic composite fabrics and corematerials.Medium cure speed hardener provides 2 to 3 hours of working time at 77°F (25°C). A typical laminate will be gelled in 4 to 5 hours.Optimized for hand wet out and machine impregnation in contact molding, vacuumbagging and filament winding applications.Excellent for taping and tabbing operations in composite structure assembly.Room temperature cure properties suitable for many composite components andstructures.Tg as high as 214° F (101°C) with proper post cure providing excellent temperature stability and great part cosmetics.Cost Effective - High Performance Epoxy formulation for synthetic compositemanufacturing. 135 ResinLAM-135 Medium Viscosity Laminating Resin 237 HardenerLAM-237 Extra Slow Laminating Hardener Medium viscosity for good wet out of all synthetic composite fabrics and corematerials.Extra Slow cure speed hardener provides 7 to 8 hours of working time at 77°F (25°C). A typical laminate will be gelled in 12 to 14 hours.Optimized for hand wet out and machine impregnation in contact molding, vacuumbagging and filament winding applications.Room temperature cure properties suitable for many composite components andstructures.Tg as high as 213° F (101°C) with proper post cure providing excellent temperature stability and great part cosmetics.Cost Effective - High Performance Epoxy formulation for synthetic compositemanufacturing.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eManufacturer Part #:\u003c\/strong\u003e 605310\u003c\/p\u003e","brand":"Aircraft Spruce","offers":[{"title":"Default Title","offer_id":54219821580630,"sku":"01-01223","price":233.8,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1037\/0164\/3606\/files\/prosetlogo_06de871a-4d22-4be7-8357-1bb83e3e397c.jpg?v=1781651522"},{"product_id":"01-01224","title":"Pro-Set Med Hardener Lam 226-1 1\/3 Gal","description":"\u003cp\u003eNote: This is the NEW 2013 Formula. NOT compatible with original formula.LAM-125 ResinLAM-125 Low Viscosity Laminating Resin LAM-229 HardenerLAM-229 Slow Laminating Hardener Low viscosity for quick wet out of synthetic composite fabrics; especially effective with Kevlar and carbon fiber.Slow cure speed hardener provides 4 to 5 hours working time at 77°F (25°C). A typical laminate will be gelled in 6 to 7 hours.Optimized for hand wet out and machine impregnation in contact molding, vacuumbagging and Light RTM applications.Room temperature cure properties suitable for many composite components andstructures.Tg as high as 197° F (92°C) with proper post cure providing excellent temperature stability and great part cosmetics.Cost Effective - High Performance Epoxy formulation for synthetic compositemanufacturing.135 ResinLAM-135 Medium Viscosity Laminating Resin 226 HardenerLAM-226 Medium Laminating Hardener Medium viscosity for good wet out of all synthetic composite fabrics and corematerials.Medium cure speed hardener provides 2 to 3 hours of working time at 77°F (25°C). A typical laminate will be gelled in 4 to 5 hours.Optimized for hand wet out and machine impregnation in contact molding, vacuumbagging and filament winding applications.Excellent for taping and tabbing operations in composite structure assembly.Room temperature cure properties suitable for many composite components andstructures.Tg as high as 214° F (101°C) with proper post cure providing excellent temperature stability and great part cosmetics.Cost Effective - High Performance Epoxy formulation for synthetic compositemanufacturing. 135 ResinLAM-135 Medium Viscosity Laminating Resin 237 HardenerLAM-237 Extra Slow Laminating Hardener Medium viscosity for good wet out of all synthetic composite fabrics and corematerials.Extra Slow cure speed hardener provides 7 to 8 hours of working time at 77°F (25°C). A typical laminate will be gelled in 12 to 14 hours.Optimized for hand wet out and machine impregnation in contact molding, vacuumbagging and filament winding applications.Room temperature cure properties suitable for many composite components andstructures.Tg as high as 213° F (101°C) with proper post cure providing excellent temperature stability and great part cosmetics.Cost Effective - High Performance Epoxy formulation for synthetic compositemanufacturing.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eManufacturer Part #:\u003c\/strong\u003e 81LAM226-1\u003c\/p\u003e","brand":"Aircraft Spruce","offers":[{"title":"Default Title","offer_id":54219821678934,"sku":"01-01224","price":171.92,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1037\/0164\/3606\/files\/prosetlogo_0cdb49bc-026e-4f7e-bdcd-5d7fc374097a.jpg?v=1781651523"},{"product_id":"01-01587","title":"PT2712A\/B High Performance Resin Gallon Kit","description":"\u003cp\u003ePT2712 is a low viscosity epoxy system designed for the fabrication of parts and structures by the resin infusion method. This system flows extremely well, and produces dense, void-free laminates routinely. The cured properties of this system are very high, so it produces items with good strength and toughness with excellent long-term stability. Three hardeners are available for use with this resin, which provide a range of working times. The hardeners have gel times of approximately 1 hour, 2 hours and 3 hours, so, by proper selection between the three, it is possible to easily infuse any size structure. The three hardeners are identical except for reaction time, so no matter which hardener is chosen, the user can expect the same high performance properties. The mixed viscosity with all three hardeners is just over 300centipoise, so the material flows very well, even in thin walled areas. It penetrates heavy fabric sections and wets out quickly for further ease of production.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eManufacturer Part #:\u003c\/strong\u003e PT2712A\/B\u003c\/p\u003e","brand":"Aircraft Spruce","offers":[{"title":"Default Title","offer_id":54219831247190,"sku":"01-01587","price":328.93,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1037\/0164\/3606\/files\/PTM_W.jpg?v=1781651649"},{"product_id":"01-01588","title":"PT2712A\/B1 High Performance Resin Gallon Kit","description":"\u003cp\u003ePT2712 is a low viscosity epoxy system designed for the fabrication of parts and structures by the resin infusion method. This system flows extremely well, and produces dense, void-free laminates routinely. The cured properties of this system are very high, so it produces items with good strength and toughness with excellent long-term stability. Three hardeners are available for use with this resin, which provide a range of working times. The hardeners have gel times of approximately 1 hour, 2 hours and 3 hours, so, by proper selection between the three, it is possible to easily infuse any size structure. The three hardeners are identical except for reaction time, so no matter which hardener is chosen, the user can expect the same high performance properties. The mixed viscosity with all three hardeners is just over 300centipoise, so the material flows very well, even in thin walled areas. It penetrates heavy fabric sections and wets out quickly for further ease of production.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eManufacturer Part #:\u003c\/strong\u003e PT2712B1\u003c\/p\u003e","brand":"Aircraft Spruce","offers":[{"title":"Default Title","offer_id":54219831312726,"sku":"01-01588","price":331.8,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1037\/0164\/3606\/files\/PTM_W_a75bc46e-25e7-487b-a2d7-9a8ca3e385ed.jpg?v=1781651650"},{"product_id":"01-01589","title":"PT2712A\/B2 High Performance Resin Gallon Kit","description":"\u003cp\u003ePT2712 is a low viscosity epoxy system designed for the fabrication of parts and structures by the resin infusion method. This system flows extremely well, and produces dense, void-free laminates routinely. The cured properties of this system are very high, so it produces items with good strength and toughness with excellent long-term stability. Three hardeners are available for use with this resin, which provide a range of working times. The hardeners have gel times of approximately 1 hour, 2 hours and 3 hours, so, by proper selection between the three, it is possible to easily infuse any size structure. The three hardeners are identical except for reaction time, so no matter which hardener is chosen, the user can expect the same high performance properties. The mixed viscosity with all three hardeners is just over 300centipoise, so the material flows very well, even in thin walled areas. It penetrates heavy fabric sections and wets out quickly for further ease of production.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eManufacturer Part #:\u003c\/strong\u003e PT2712B2\u003c\/p\u003e","brand":"Aircraft Spruce","offers":[{"title":"Default Title","offer_id":54219831378262,"sku":"01-01589","price":327.53,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1037\/0164\/3606\/files\/PTM_W_40424003-f34a-4017-93d3-e55a0a06d101.jpg?v=1781651652"},{"product_id":"01-01590","title":"PT2712A\/B High Performance Resin 5 Gallon","description":"\u003cp\u003ePT2712 is a low viscosity epoxy system designed for the fabrication of parts and structures by the resin infusion method. This system flows extremely well, and produces dense, void-free laminates routinely. The cured properties of this system are very high, so it produces items with good strength and toughness with excellent long-term stability. Three hardeners are available for use with this resin, which provide a range of working times. The hardeners have gel times of approximately 1 hour, 2 hours and 3 hours, so, by proper selection between the three, it is possible to easily infuse any size structure. The three hardeners are identical except for reaction time, so no matter which hardener is chosen, the user can expect the same high performance properties. The mixed viscosity with all three hardeners is just over 300centipoise, so the material flows very well, even in thin walled areas. It penetrates heavy fabric sections and wets out quickly for further ease of production.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eManufacturer Part #:\u003c\/strong\u003e PT2712A\/B 5GAL\u003c\/p\u003e","brand":"Aircraft Spruce","offers":[{"title":"Default Title","offer_id":54219831476566,"sku":"01-01590","price":875.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1037\/0164\/3606\/files\/PTM_W_ffea59c9-8c78-4376-a9cc-06572b6856be.jpg?v=1781651654"},{"product_id":"01-01591","title":"PT2712A\/B1 High Performance Resin 5 Gal","description":"\u003cp\u003ePT2712 is a low viscosity epoxy system designed for the fabrication of parts and structures by the resin infusion method. This system flows extremely well, and produces dense, void-free laminates routinely. The cured properties of this system are very high, so it produces items with good strength and toughness with excellent long-term stability. Three hardeners are available for use with this resin, which provide a range of working times. The hardeners have gel times of approximately 1 hour, 2 hours and 3 hours, so, by proper selection between the three, it is possible to easily infuse any size structure. The three hardeners are identical except for reaction time, so no matter which hardener is chosen, the user can expect the same high performance properties. The mixed viscosity with all three hardeners is just over 300centipoise, so the material flows very well, even in thin walled areas. It penetrates heavy fabric sections and wets out quickly for further ease of production.\u003c\/p\u003e","brand":"Aircraft Spruce","offers":[{"title":"Default Title","offer_id":54219831574870,"sku":"01-01591","price":938.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1037\/0164\/3606\/files\/PTM_W_6b943358-b38f-472e-be51-d504b60acb87.jpg?v=1781651656"},{"product_id":"01-01592","title":"PT2712A\/B2 High Performance Resin 5 Gal","description":"\u003cp\u003ePT2712 is a low viscosity epoxy system designed for the fabrication of parts and structures by the resin infusion method. This system flows extremely well, and produces dense, void-free laminates routinely. The cured properties of this system are very high, so it produces items with good strength and toughness with excellent long-term stability. Three hardeners are available for use with this resin, which provide a range of working times. The hardeners have gel times of approximately 1 hour, 2 hours and 3 hours, so, by proper selection between the three, it is possible to easily infuse any size structure. The three hardeners are identical except for reaction time, so no matter which hardener is chosen, the user can expect the same high performance properties. The mixed viscosity with all three hardeners is just over 300centipoise, so the material flows very well, even in thin walled areas. It penetrates heavy fabric sections and wets out quickly for further ease of production.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eManufacturer Part #:\u003c\/strong\u003e PT2712A\/B2\u003c\/p\u003e","brand":"Aircraft Spruce","offers":[{"title":"Default Title","offer_id":54219831673174,"sku":"01-01592","price":980.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1037\/0164\/3606\/files\/PTM_W_51ca0c5f-c59b-4d7f-9955-1882c8fd30fa.jpg?v=1781651658"},{"product_id":"01-01593","title":"PT2712A\/B3 High Performance Resin Fast Gel","description":"\u003cp\u003ePT2712 is a low viscosity epoxy system designed for the fabrication of parts and structures by the resin infusion method. This system flows extremely well, and produces dense, void-free laminates routinely. The cured properties of this system are very high, so it produces items with good strength and toughness with excellent long-term stability. Three hardeners are available for use with this resin, which provide a range of working times. The hardeners have gel times of approximately 1 hour, 2 hours and 3 hours, so, by proper selection between the three, it is possible to easily infuse any size structure. The three hardeners are identical except for reaction time, so no matter which hardener is chosen, the user can expect the same high performance properties. The mixed viscosity with all three hardeners is just over 300centipoise, so the material flows very well, even in thin walled areas. It penetrates heavy fabric sections and wets out quickly for further ease of production.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eManufacturer Part #:\u003c\/strong\u003e PT2712A\/B3\u003c\/p\u003e","brand":"Aircraft Spruce","offers":[{"title":"Default Title","offer_id":54219831771478,"sku":"01-01593","price":278.39,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1037\/0164\/3606\/files\/PTM_W_2724c8b7-dc7d-47be-9bb7-2e9be59e2915.jpg?v=1781651659"},{"product_id":"01-01594","title":"PT2712A\/B3 High Performance Resin Fast Gel 5 Gallon","description":"\u003cp\u003ePT2712 is a low viscosity epoxy system designed for the fabrication of parts and structures by the resin infusion method. This system flows extremely well, and produces dense, void-free laminates routinely. The cured properties of this system are very high, so it produces items with good strength and toughness with excellent long-term stability. Three hardeners are available for use with this resin, which provide a range of working times. The hardeners have gel times of approximately 1 hour, 2 hours and 3 hours, so, by proper selection between the three, it is possible to easily infuse any size structure. The three hardeners are identical except for reaction time, so no matter which hardener is chosen, the user can expect the same high performance properties. The mixed viscosity with all three hardeners is just over 300centipoise, so the material flows very well, even in thin walled areas. It penetrates heavy fabric sections and wets out quickly for further ease of production.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eManufacturer Part #:\u003c\/strong\u003e PT2712A\/B3 5 GAL\u003c\/p\u003e","brand":"Aircraft Spruce","offers":[{"title":"Default Title","offer_id":54219831869782,"sku":"01-01594","price":863.8,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1037\/0164\/3606\/files\/PTM_W_2f357e4e-125c-4cc0-8951-12110b8af9b5.jpg?v=1781651662"},{"product_id":"01-01654","title":"Mvs-610 Resin Gallon","description":"\u003cp\u003eMVS-610 is a very low viscosity epoxy resin intended for the vacuum-assisted resin infusion process. Two hardeners are listed here with different gel times for a variety of part sizes. The mixed viscosities of these two systems are very low, and result in rapid infusion in even the most dense fiber stacks. This feature is very desirable in production applications, allowing quick turnaround for increased production. The MVS-610 System is ideal for quickly producing a variety of parts and shapes that offer very good cured properties and long term stability.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eManufacturer Part #:\u003c\/strong\u003e MVS-610\u003c\/p\u003e","brand":"Aircraft Spruce","offers":[{"title":"Default Title","offer_id":54219833999702,"sku":"01-01654","price":134.05,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1037\/0164\/3606\/files\/01-01654.jpg?v=1781651686"},{"product_id":"01-01655","title":"Mvs-615 Hardener - Quart","description":"\u003cp\u003eMVS-610 is a very low viscosity epoxy resin intended for the vacuum-assisted resin infusion process. Two hardeners are listed here with different gel times for a variety of part sizes. The mixed viscosities of these two systems are very low, and result in rapid infusion in even the most dense fiber stacks. This feature is very desirable in production applications, allowing quick turnaround for increased production. The MVS-610 System is ideal for quickly producing a variety of parts and shapes that offer very good cured properties and long term stability.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eManufacturer Part #:\u003c\/strong\u003e MVS-615\u003c\/p\u003e","brand":"Aircraft Spruce","offers":[{"title":"Default Title","offer_id":54219834065238,"sku":"01-01655","price":56.7,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1037\/0164\/3606\/files\/01-01655.jpg?v=1781651687"},{"product_id":"01-01656","title":"Mvs-620 Hardener - Quart","description":"\u003cp\u003eMVS-610 is a very low viscosity epoxy resin intended for the vacuum-assisted resin infusion process. Two hardeners are listed here with different gel times for a variety of part sizes. The mixed viscosities of these two systems are very low, and result in rapid infusion in even the most dense fiber stacks. This feature is very desirable in production applications, allowing quick turnaround for increased production. The MVS-610 System is ideal for quickly producing a variety of parts and shapes that offer very good cured properties and long term stability.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eManufacturer Part #:\u003c\/strong\u003e MVS-620\u003c\/p\u003e","brand":"Aircraft Spruce","offers":[{"title":"Default Title","offer_id":54219834163542,"sku":"01-01656","price":63.7,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1037\/0164\/3606\/files\/01-01656.jpg?v=1781651689"},{"product_id":"01-01657","title":"Mvs-610 Resin With Mvs-615 Hardener Gallon Kit","description":"\u003cp\u003eMVS-610 is a very low viscosity epoxy resin intended for the vacuum-assisted resin infusion process. Two hardeners are listed here with different gel times for a variety of part sizes. The mixed viscosities of these two systems are very low, and result in rapid infusion in even the most dense fiber stacks. This feature is very desirable in production applications, allowing quick turnaround for increased production. The MVS-610 System is ideal for quickly producing a variety of parts and shapes that offer very good cured properties and long term stability.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eManufacturer Part #:\u003c\/strong\u003e 1MVS-610 \u0026amp; MVS-615\u003c\/p\u003e","brand":"Aircraft Spruce","offers":[{"title":"Default Title","offer_id":54219834229078,"sku":"01-01657","price":233.45,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1037\/0164\/3606\/files\/01-01657.jpg?v=1781651690"},{"product_id":"01-01658","title":"Mvs-610 Resin With Mvs-620 Hardener Gallon Kit","description":"\u003cp\u003eMVS-610 is a very low viscosity epoxy resin intended for the vacuum-assisted resin infusion process. Two hardeners are listed here with different gel times for a variety of part sizes. The mixed viscosities of these two systems are very low, and result in rapid infusion in even the most dense fiber stacks. This feature is very desirable in production applications, allowing quick turnaround for increased production. The MVS-610 System is ideal for quickly producing a variety of parts and shapes that offer very good cured properties and long term stability.\u003c\/p\u003e","brand":"Aircraft Spruce","offers":[{"title":"Default Title","offer_id":54219834294614,"sku":"01-01658","price":247.59,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1037\/0164\/3606\/files\/01-01658.jpg?v=1781651692"},{"product_id":"01-01688","title":"Pro-Set Fast Hardener Lam 224-1 .33 Gal","description":"\u003cp\u003eNote: This is the NEW 2013 Formula. NOT compatible with original formula.LAM-125 ResinLAM-125 Low Viscosity Laminating Resin LAM-229 HardenerLAM-229 Slow Laminating Hardener Low viscosity for quick wet out of synthetic composite fabrics; especially effective with Kevlar and carbon fiber.Slow cure speed hardener provides 4 to 5 hours working time at 77°F (25°C). A typical laminate will be gelled in 6 to 7 hours.Optimized for hand wet out and machine impregnation in contact molding, vacuumbagging and Light RTM applications.Room temperature cure properties suitable for many composite components andstructures.Tg as high as 197° F (92°C) with proper post cure providing excellent temperature stability and great part cosmetics.Cost Effective - High Performance Epoxy formulation for synthetic compositemanufacturing.135 ResinLAM-135 Medium Viscosity Laminating Resin 226 HardenerLAM-226 Medium Laminating Hardener Medium viscosity for good wet out of all synthetic composite fabrics and corematerials.Medium cure speed hardener provides 2 to 3 hours of working time at 77°F (25°C). A typical laminate will be gelled in 4 to 5 hours.Optimized for hand wet out and machine impregnation in contact molding, vacuumbagging and filament winding applications.Excellent for taping and tabbing operations in composite structure assembly.Room temperature cure properties suitable for many composite components andstructures.Tg as high as 214° F (101°C) with proper post cure providing excellent temperature stability and great part cosmetics.Cost Effective - High Performance Epoxy formulation for synthetic compositemanufacturing. 135 ResinLAM-135 Medium Viscosity Laminating Resin 237 HardenerLAM-237 Extra Slow Laminating Hardener Medium viscosity for good wet out of all synthetic composite fabrics and corematerials.Extra Slow cure speed hardener provides 7 to 8 hours of working time at 77°F (25°C). A typical laminate will be gelled in 12 to 14 hours.Optimized for hand wet out and machine impregnation in contact molding, vacuumbagging and filament winding applications.Room temperature cure properties suitable for many composite components andstructures.Tg as high as 213° F (101°C) with proper post cure providing excellent temperature stability and great part cosmetics.Cost Effective - High Performance Epoxy formulation for synthetic compositemanufacturing.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eManufacturer Part #:\u003c\/strong\u003e 81LAM224-1\u003c\/p\u003e","brand":"Aircraft Spruce","offers":[{"title":"Default Title","offer_id":54219835703638,"sku":"01-01688","price":139.65,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1037\/0164\/3606\/files\/prosetlogo_7c02e716-f618-451e-9cf7-98d864b6e6ac.jpg?v=1781651710"},{"product_id":"01-01689","title":"Pro-Set Fast Hardener Lam-224-2 1.4 Gal","description":"\u003cp\u003eNote: This is the NEW 2013 Formula. NOT compatible with original formula.LAM-125 ResinLAM-125 Low Viscosity Laminating Resin LAM-229 HardenerLAM-229 Slow Laminating Hardener Low viscosity for quick wet out of synthetic composite fabrics; especially effective with Kevlar and carbon fiber.Slow cure speed hardener provides 4 to 5 hours working time at 77°F (25°C). A typical laminate will be gelled in 6 to 7 hours.Optimized for hand wet out and machine impregnation in contact molding, vacuumbagging and Light RTM applications.Room temperature cure properties suitable for many composite components andstructures.Tg as high as 197° F (92°C) with proper post cure providing excellent temperature stability and great part cosmetics.Cost Effective - High Performance Epoxy formulation for synthetic compositemanufacturing.135 ResinLAM-135 Medium Viscosity Laminating Resin 226 HardenerLAM-226 Medium Laminating Hardener Medium viscosity for good wet out of all synthetic composite fabrics and corematerials.Medium cure speed hardener provides 2 to 3 hours of working time at 77°F (25°C). A typical laminate will be gelled in 4 to 5 hours.Optimized for hand wet out and machine impregnation in contact molding, vacuumbagging and filament winding applications.Excellent for taping and tabbing operations in composite structure assembly.Room temperature cure properties suitable for many composite components andstructures.Tg as high as 214° F (101°C) with proper post cure providing excellent temperature stability and great part cosmetics.Cost Effective - High Performance Epoxy formulation for synthetic compositemanufacturing. 135 ResinLAM-135 Medium Viscosity Laminating Resin 237 HardenerLAM-237 Extra Slow Laminating Hardener Medium viscosity for good wet out of all synthetic composite fabrics and corematerials.Extra Slow cure speed hardener provides 7 to 8 hours of working time at 77°F (25°C). A typical laminate will be gelled in 12 to 14 hours.Optimized for hand wet out and machine impregnation in contact molding, vacuumbagging and filament winding applications.Room temperature cure properties suitable for many composite components andstructures.Tg as high as 213° F (101°C) with proper post cure providing excellent temperature stability and great part cosmetics.Cost Effective - High Performance Epoxy formulation for synthetic compositemanufacturing.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eManufacturer Part #:\u003c\/strong\u003e 81LAM224-2\u003c\/p\u003e","brand":"Aircraft Spruce","offers":[{"title":"Default Title","offer_id":54219835769174,"sku":"01-01689","price":397.53,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1037\/0164\/3606\/files\/prosetlogo_98c96d7e-945d-4884-ab4b-98f12f54a1b7.jpg?v=1781651711"},{"product_id":"01-01693","title":"Pro-Set Ext Slow Hardener Lam-237-0 # 2.7 .33 Gal","description":"\u003cp\u003eNote: This is the NEW 2013 Formula. NOT compatible with original formula.LAM-125 ResinLAM-125 Low Viscosity Laminating Resin LAM-229 HardenerLAM-229 Slow Laminating Hardener Low viscosity for quick wet out of synthetic composite fabrics; especially effective with Kevlar and carbon fiber.Slow cure speed hardener provides 4 to 5 hours working time at 77°F (25°C). A typical laminate will be gelled in 6 to 7 hours.Optimized for hand wet out and machine impregnation in contact molding, vacuumbagging and Light RTM applications.Room temperature cure properties suitable for many composite components andstructures.Tg as high as 197° F (92°C) with proper post cure providing excellent temperature stability and great part cosmetics.Cost Effective - High Performance Epoxy formulation for synthetic compositemanufacturing.135 ResinLAM-135 Medium Viscosity Laminating Resin 226 HardenerLAM-226 Medium Laminating Hardener Medium viscosity for good wet out of all synthetic composite fabrics and corematerials.Medium cure speed hardener provides 2 to 3 hours of working time at 77°F (25°C). A typical laminate will be gelled in 4 to 5 hours.Optimized for hand wet out and machine impregnation in contact molding, vacuumbagging and filament winding applications.Excellent for taping and tabbing operations in composite structure assembly.Room temperature cure properties suitable for many composite components andstructures.Tg as high as 214° F (101°C) with proper post cure providing excellent temperature stability and great part cosmetics.Cost Effective - High Performance Epoxy formulation for synthetic compositemanufacturing. 135 ResinLAM-135 Medium Viscosity Laminating Resin 237 HardenerLAM-237 Extra Slow Laminating Hardener Medium viscosity for good wet out of all synthetic composite fabrics and corematerials.Extra Slow cure speed hardener provides 7 to 8 hours of working time at 77°F (25°C). A typical laminate will be gelled in 12 to 14 hours.Optimized for hand wet out and machine impregnation in contact molding, vacuumbagging and filament winding applications.Room temperature cure properties suitable for many composite components andstructures.Tg as high as 213° F (101°C) with proper post cure providing excellent temperature stability and great part cosmetics.Cost Effective - High Performance Epoxy formulation for synthetic compositemanufacturing.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eManufacturer Part #:\u003c\/strong\u003e 81LAM237-1\u003c\/p\u003e","brand":"Aircraft Spruce","offers":[{"title":"Default Title","offer_id":54219835867478,"sku":"01-01693","price":111.65,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1037\/0164\/3606\/files\/prosetlogo_b672ff98-c5fa-4abd-89ad-780781b84811.jpg?v=1781651712"},{"product_id":"01-07905","title":"Poly-Poxy Quart Kit","description":"\u003cp\u003ePoly Epoxy is a true high-performance epoxy resin with unmatched tensile, compressive, and flex strengths. It also has unbeatable peel, shear, and fatigue resistance, as well as impact strength and fracture behavior. Its great for wings, canards, fuselages, tail feathers, and landing gear. Use it in molds or moldless construction. It parts easily and works beautifully in vacuum bagging. Shelf life: 2 years\u003c\/p\u003e","brand":"Aircraft Spruce","offers":[{"title":"Default Title","offer_id":54219840127318,"sku":"01-07905","price":59.5,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1037\/0164\/3606\/files\/01-07933.jpg?v=1781651774"},{"product_id":"01-07906","title":"Poly-Poxy 1-1\/4 Gallon Kit","description":"\u003cp\u003ePoly Epoxy is a true high-performance epoxy resin with unmatched tensile, compressive, and flex strengths. It also has unbeatable peel, shear, and fatigue resistance, as well as impact strength and fracture behavior. Its great for wings, canards, fuselages, tail feathers, and landing gear. Use it in molds or moldless construction. It parts easily and works beautifully in vacuum bagging. Shelf life: 2 years\u003c\/p\u003e","brand":"Aircraft Spruce","offers":[{"title":"Default Title","offer_id":54219840225622,"sku":"01-07906","price":244.93,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1037\/0164\/3606\/files\/01-07933_275702f9-93ff-4236-8cf1-28922b3a31ed.jpg?v=1781651775"},{"product_id":"01-07908","title":"Alpha Poxy Hardener 3\/8 Gal","description":"\u003cp\u003eAvailable exclusively from us AlphaPoxy is a low-cost flexible epoxy system that is ideal for laying up non-structural parts like wheel pants, or fairings. Because it is flexible, we don't recommend it for structural applications, such as fabricating load-bearing structural aircraft parts. Use PolyEpoxy for these applications. This is a low-viscosity system specifically formulated for filling with microballoons, cotton flox, or milled glass fibers to make slurries. It was designed for maximum sandibility; when cured, it is soft enough to be easily cut with sandpaper smoothing a breeze. AlphaPoxy is also excellent when used as a final filler resin over structural parts when an epoxy gel coat is called for. You can use it in place of polyester resins for a much more durable part at a very attractive price.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eManufacturer Part #:\u003c\/strong\u003e 14-APH.5\u003c\/p\u003e","brand":"Aircraft Spruce","offers":[{"title":"Default Title","offer_id":54219840291158,"sku":"01-07908","price":82.6,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1037\/0164\/3606\/files\/alphapoxy.jpg?v=1781651777"},{"product_id":"01-07909","title":"Alphapoxy Hardener Gallon","description":"\u003cp\u003eAvailable exclusively from us AlphaPoxy is a low-cost flexible epoxy system that is ideal for laying up non-structural parts like wheel pants, or fairings. Because it is flexible, we don't recommend it for structural applications, such as fabricating load-bearing structural aircraft parts. Use PolyEpoxy for these applications. This is a low-viscosity system specifically formulated for filling with microballoons, cotton flox, or milled glass fibers to make slurries. It was designed for maximum sandibility; when cured, it is soft enough to be easily cut with sandpaper smoothing a breeze. AlphaPoxy is also excellent when used as a final filler resin over structural parts when an epoxy gel coat is called for. You can use it in place of polyester resins for a much more durable part at a very attractive price.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eManufacturer Part #:\u003c\/strong\u003e 14-APH4\u003c\/p\u003e","brand":"Aircraft Spruce","offers":[{"title":"Default Title","offer_id":54219840356694,"sku":"01-07909","price":158.13,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1037\/0164\/3606\/files\/alphapoxy_09873824-1c63-4583-a27d-6091784660de.jpg?v=1781651778"},{"product_id":"01-07910","title":"Alphapoxy Hardner 5 Gallon Pail","description":"\u003cp\u003eAvailable exclusively from us AlphaPoxy is a low-cost flexible epoxy system that is ideal for laying up non-structural parts like wheel pants, or fairings. Because it is flexible, we don't recommend it for structural applications, such as fabricating load-bearing structural aircraft parts. Use PolyEpoxy for these applications. This is a low-viscosity system specifically formulated for filling with microballoons, cotton flox, or milled glass fibers to make slurries. It was designed for maximum sandibility; when cured, it is soft enough to be easily cut with sandpaper smoothing a breeze. AlphaPoxy is also excellent when used as a final filler resin over structural parts when an epoxy gel coat is called for. You can use it in place of polyester resins for a much more durable part at a very attractive price.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eManufacturer Part #:\u003c\/strong\u003e 14-APH5\u003c\/p\u003e","brand":"Aircraft Spruce","offers":[{"title":"Default Title","offer_id":54219840454998,"sku":"01-07910","price":781.2,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1037\/0164\/3606\/files\/alphapoxy_c47bbbc7-42cf-48f4-9111-2bad4f4eccbc.jpg?v=1781651779"},{"product_id":"01-07911","title":"Alpha Poxy 1-1\/4 Gallon Kit","description":"\u003cp\u003eAvailable exclusively from us AlphaPoxy is a low-cost flexible epoxy system that is ideal for laying up non-structural parts like wheel pants, or fairings. Because it is flexible, we don't recommend it for structural applications, such as fabricating load-bearing structural aircraft parts. Use PolyEpoxy for these applications. This is a low-viscosity system specifically formulated for filling with microballoons, cotton flox, or milled glass fibers to make slurries. It was designed for maximum sandibility; when cured, it is soft enough to be easily cut with sandpaper smoothing a breeze. AlphaPoxy is also excellent when used as a final filler resin over structural parts when an epoxy gel coat is called for. You can use it in place of polyester resins for a much more durable part at a very attractive price.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eManufacturer Part #:\u003c\/strong\u003e 14-APKIT\u003c\/p\u003e","brand":"Aircraft Spruce","offers":[{"title":"Default Title","offer_id":54219840520534,"sku":"01-07911","price":219.73,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1037\/0164\/3606\/files\/alphapoxy_4b86c72b-93de-4f2b-a0c1-1d3fcea80fb4.jpg?v=1781651781"},{"product_id":"01-07912","title":"Alpha Poxy Resin 7\/8 Gal","description":"\u003cp\u003eAvailable exclusively from us AlphaPoxy is a low-cost flexible epoxy system that is ideal for laying up non-structural parts like wheel pants, or fairings. Because it is flexible, we don't recommend it for structural applications, such as fabricating load-bearing structural aircraft parts. Use PolyEpoxy for these applications. This is a low-viscosity system specifically formulated for filling with microballoons, cotton flox, or milled glass fibers to make slurries. It was designed for maximum sandibility; when cured, it is soft enough to be easily cut with sandpaper smoothing a breeze. AlphaPoxy is also excellent when used as a final filler resin over structural parts when an epoxy gel coat is called for. You can use it in place of polyester resins for a much more durable part at a very attractive price.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eManufacturer Part #:\u003c\/strong\u003e 14APR4\u003c\/p\u003e","brand":"Aircraft Spruce","offers":[{"title":"Default Title","offer_id":54219840586070,"sku":"01-07912","price":137.55,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1037\/0164\/3606\/files\/alphapoxy_c030cce5-4b58-4bbe-b872-e0456226a701.jpg?v=1781651782"},{"product_id":"01-07913","title":"Alphapoxy Resin 5 Gallon Pail","description":"\u003cp\u003eAvailable exclusively from us AlphaPoxy is a low-cost flexible epoxy system that is ideal for laying up non-structural parts like wheel pants, or fairings. Because it is flexible, we don't recommend it for structural applications, such as fabricating load-bearing structural aircraft parts. Use PolyEpoxy for these applications. This is a low-viscosity system specifically formulated for filling with microballoons, cotton flox, or milled glass fibers to make slurries. It was designed for maximum sandibility; when cured, it is soft enough to be easily cut with sandpaper smoothing a breeze. AlphaPoxy is also excellent when used as a final filler resin over structural parts when an epoxy gel coat is called for. You can use it in place of polyester resins for a much more durable part at a very attractive price.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eManufacturer Part #:\u003c\/strong\u003e 14-APR5\u003c\/p\u003e","brand":"Aircraft Spruce","offers":[{"title":"Default Title","offer_id":54219840651606,"sku":"01-07913","price":690.13,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1037\/0164\/3606\/files\/alphapoxy_05a86bd9-64e7-4de0-967e-a568902e2fdd.jpg?v=1781651783"},{"product_id":"01-07914","title":"Rhino 1307 Lv Resin Gallon 8 Lb","description":"\u003cp\u003e1307 Low Viscosity Resin \/ H-3102 Fast Epoxy Hardener - 100% solids two component epoxy laminating system with excellent wet out, low viscosity and high strength. Very low odor and toxicity. Easy to use, Mix Ratio: 4:1 by volume; 100:22 by weight. Gel Time: 12-15 minutes @ 77°F (150 grams). Fast curing products for a variety of use applications. Used for fast curing, penetrating wood coatings, adhesives and sealers, fiberglass laminating and microsphere filled fairing compounds. Excellent cold temperature cures down to 40 degrees F. No solvents or VOCs. Non-hazardous, non-corrosive hardener. H-3176 30-minute Medium R\/T Epoxy Hardener- Safety Press Molding Epoxy Hardner. Good low temperature cure. Fast wetting of fiberglass reinforcements. Easy to use 4:1 mix ratio by volume; 100:22 by weight. Gel time: 25-30 minutes @ 77°F (150 grams). High HDT at room temp, increasing with post cure. Low toxicity, very low odor. Non-hazmat.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eManufacturer Part #:\u003c\/strong\u003e *1307EI\/8\u003c\/p\u003e","brand":"Aircraft Spruce","offers":[{"title":"Default Title","offer_id":54219840717142,"sku":"01-07914","price":177.73,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1037\/0164\/3606\/files\/jeffco_8e17ffaf-d378-419b-bf05-240ebf0ea4df.jpg?v=1781651784"},{"product_id":"01-07915","title":"Rhino 3102 Fast Hardener 2Lb","description":"\u003cp\u003e1307 Low Viscosity Resin \/ H-3102 Fast Epoxy Hardener - 100% solids two component epoxy laminating system with excellent wet out, low viscosity and high strength. Very low odor and toxicity. Easy to use, Mix Ratio: 4:1 by volume; 100:22 by weight. Gel Time: 12-15 minutes @ 77°F (150 grams). Fast curing products for a variety of use applications. Used for fast curing, penetrating wood coatings, adhesives and sealers, fiberglass laminating and microsphere filled fairing compounds. Excellent cold temperature cures down to 40 degrees F. No solvents or VOCs. Non-hazardous, non-corrosive hardener. H-3176 30-minute Medium R\/T Epoxy Hardener- Safety Press Molding Epoxy Hardner. Good low temperature cure. Fast wetting of fiberglass reinforcements. Easy to use 4:1 mix ratio by volume; 100:22 by weight. Gel time: 25-30 minutes @ 77°F (150 grams). High HDT at room temp, increasing with post cure. Low toxicity, very low odor. Non-hazmat.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eManufacturer Part #:\u003c\/strong\u003e *3102EI\/2\u003c\/p\u003e","brand":"Aircraft Spruce","offers":[{"title":"Default Title","offer_id":54219840782678,"sku":"01-07915","price":54.95,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1037\/0164\/3606\/files\/jeffco_13ff8f71-3ee6-4572-89bb-d5d7606a0cb2.jpg?v=1781651786"},{"product_id":"01-07916","title":"Rhino 1 Gallon Kit Fast","description":"\u003cp\u003e1307 Low Viscosity Resin \/ H-3102 Fast Epoxy Hardener - 100% solids two component epoxy laminating system with excellent wet out, low viscosity and high strength. Very low odor and toxicity. Easy to use, Mix Ratio: 4:1 by volume; 100:22 by weight. Gel Time: 12-15 minutes @ 77°F (150 grams). Fast curing products for a variety of use applications. Used for fast curing, penetrating wood coatings, adhesives and sealers, fiberglass laminating and microsphere filled fairing compounds. Excellent cold temperature cures down to 40 degrees F. No solvents or VOCs. Non-hazardous, non-corrosive hardener. H-3176 30-minute Medium R\/T Epoxy Hardener- Safety Press Molding Epoxy Hardner. Good low temperature cure. Fast wetting of fiberglass reinforcements. Easy to use 4:1 mix ratio by volume; 100:22 by weight. Gel time: 25-30 minutes @ 77°F (150 grams). High HDT at room temp, increasing with post cure. Low toxicity, very low odor. Non-hazmat.\u003c\/p\u003e","brand":"Aircraft Spruce","offers":[{"title":"Default Title","offer_id":54219840848214,"sku":"01-07916","price":232.33,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1037\/0164\/3606\/files\/jeffco_cfcb6a32-d21f-491a-a82b-212fd165f055.jpg?v=1781651787"},{"product_id":"01-07917","title":"Rhino 1307 Lv Resin 5 Gallon 40#","description":"\u003cp\u003e1307 Low Viscosity Resin \/ H-3102 Fast Epoxy Hardener - 100% solids two component epoxy laminating system with excellent wet out, low viscosity and high strength. Very low odor and toxicity. Easy to use, Mix Ratio: 4:1 by volume; 100:22 by weight. Gel Time: 12-15 minutes @ 77°F (150 grams). Fast curing products for a variety of use applications. Used for fast curing, penetrating wood coatings, adhesives and sealers, fiberglass laminating and microsphere filled fairing compounds. Excellent cold temperature cures down to 40 degrees F. No solvents or VOCs. Non-hazardous, non-corrosive hardener. H-3176 30-minute Medium R\/T Epoxy Hardener- Safety Press Molding Epoxy Hardner. Good low temperature cure. Fast wetting of fiberglass reinforcements. Easy to use 4:1 mix ratio by volume; 100:22 by weight. Gel time: 25-30 minutes @ 77°F (150 grams). High HDT at room temp, increasing with post cure. Low toxicity, very low odor. Non-hazmat.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eManufacturer Part #:\u003c\/strong\u003e *1307EI\/40\u003c\/p\u003e","brand":"Aircraft Spruce","offers":[{"title":"Default Title","offer_id":54219840946518,"sku":"01-07917","price":887.6,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1037\/0164\/3606\/files\/jeffco_2472b530-535a-459a-ba8f-47027af5040d.jpg?v=1781651788"},{"product_id":"01-07918","title":"Rhino 3102 Fast Hardener 8 Lb","description":"\u003cp\u003e1307 Low Viscosity Resin \/ H-3102 Fast Epoxy Hardener - 100% solids two component epoxy laminating system with excellent wet out, low viscosity and high strength. Very low odor and toxicity. Easy to use, Mix Ratio: 4:1 by volume; 100:22 by weight. Gel Time: 12-15 minutes @ 77°F (150 grams). Fast curing products for a variety of use applications. Used for fast curing, penetrating wood coatings, adhesives and sealers, fiberglass laminating and microsphere filled fairing compounds. Excellent cold temperature cures down to 40 degrees F. No solvents or VOCs. Non-hazardous, non-corrosive hardener. H-3176 30-minute Medium R\/T Epoxy Hardener- Safety Press Molding Epoxy Hardner. Good low temperature cure. Fast wetting of fiberglass reinforcements. Easy to use 4:1 mix ratio by volume; 100:22 by weight. Gel time: 25-30 minutes @ 77°F (150 grams). High HDT at room temp, increasing with post cure. Low toxicity, very low odor. Non-hazmat.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eManufacturer Part #:\u003c\/strong\u003e 3102EI\/8\u003c\/p\u003e","brand":"Aircraft Spruce","offers":[{"title":"Default Title","offer_id":54219841012054,"sku":"01-07918","price":198.73,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1037\/0164\/3606\/files\/jeffco_a53d11d7-d1d3-4ccf-aab6-c8a475d97141.jpg?v=1781651789"},{"product_id":"01-07919","title":"Rhino Lv 1307 5 Gallon Kit Fast","description":"\u003cp\u003e1307 Low Viscosity Resin \/ H-3102 Fast Epoxy Hardener - 100% solids two component epoxy laminating system with excellent wet out, low viscosity and high strength. Very low odor and toxicity. Easy to use, Mix Ratio: 4:1 by volume; 100:22 by weight. Gel Time: 12-15 minutes @ 77°F (150 grams). Fast curing products for a variety of use applications. Used for fast curing, penetrating wood coatings, adhesives and sealers, fiberglass laminating and microsphere filled fairing compounds. Excellent cold temperature cures down to 40 degrees F. No solvents or VOCs. Non-hazardous, non-corrosive hardener. H-3176 30-minute Medium R\/T Epoxy Hardener- Safety Press Molding Epoxy Hardner. Good low temperature cure. Fast wetting of fiberglass reinforcements. Easy to use 4:1 mix ratio by volume; 100:22 by weight. Gel time: 25-30 minutes @ 77°F (150 grams). High HDT at room temp, increasing with post cure. Low toxicity, very low odor. Non-hazmat.\u003c\/p\u003e","brand":"Aircraft Spruce","offers":[{"title":"Default Title","offer_id":54219841077590,"sku":"01-07919","price":1145.2,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1037\/0164\/3606\/files\/jeffco_ebaa881e-89f2-4aa0-af77-40c63bf1657a.jpg?v=1781651790"},{"product_id":"01-07920","title":"Jeffco 3102 Standard Hardener 40 Lb","description":"\u003cp\u003e1307 Low Viscosity Resin \/ H-3102 Fast Epoxy Hardener - 100% solids two component epoxy laminating system with excellent wet out, low viscosity and high strength. Very low odor and toxicity. Easy to use, Mix Ratio: 4:1 by volume; 100:22 by weight. Gel Time: 12-15 minutes @ 77°F (150 grams). Fast curing products for a variety of use applications. Used for fast curing, penetrating wood coatings, adhesives and sealers, fiberglass laminating and microsphere filled fairing compounds. Excellent cold temperature cures down to 40 degrees F. No solvents or VOCs. Non-hazardous, non-corrosive hardener. H-3176 30-minute Medium R\/T Epoxy Hardener- Safety Press Molding Epoxy Hardner. Good low temperature cure. Fast wetting of fiberglass reinforcements. Easy to use 4:1 mix ratio by volume; 100:22 by weight. Gel time: 25-30 minutes @ 77°F (150 grams). High HDT at room temp, increasing with post cure. Low toxicity, very low odor. Non-hazmat.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eManufacturer Part #:\u003c\/strong\u003e 614979\u003c\/p\u003e","brand":"Aircraft Spruce","offers":[{"title":"Default Title","offer_id":54219841175894,"sku":"01-07920","price":875.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1037\/0164\/3606\/files\/jeffco_0292a219-8077-4fa1-939c-281631269afd.jpg?v=1781651793"},{"product_id":"01-07921","title":"Rhino 3176 Med Hardener 40 Lb.","description":"\u003cp\u003e1307 Low Viscosity Resin \/ H-3102 Fast Epoxy Hardener - 100% solids two component epoxy laminating system with excellent wet out, low viscosity and high strength. Very low odor and toxicity. Easy to use, Mix Ratio: 4:1 by volume; 100:22 by weight. Gel Time: 12-15 minutes @ 77°F (150 grams). Fast curing products for a variety of use applications. Used for fast curing, penetrating wood coatings, adhesives and sealers, fiberglass laminating and microsphere filled fairing compounds. Excellent cold temperature cures down to 40 degrees F. No solvents or VOCs. Non-hazardous, non-corrosive hardener. H-3176 30-minute Medium R\/T Epoxy Hardener- Safety Press Molding Epoxy Hardner. Good low temperature cure. Fast wetting of fiberglass reinforcements. Easy to use 4:1 mix ratio by volume; 100:22 by weight. Gel time: 25-30 minutes @ 77°F (150 grams). High HDT at room temp, increasing with post cure. Low toxicity, very low odor. Non-hazmat.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eManufacturer Part #:\u003c\/strong\u003e 613061\u003c\/p\u003e","brand":"Aircraft Spruce","offers":[{"title":"Default Title","offer_id":54219841241430,"sku":"01-07921","price":926.8,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1037\/0164\/3606\/files\/jeffco_41c574a0-849f-4aa2-9d49-d136fb4c3621.jpg?v=1781651793"},{"product_id":"01-07922","title":"Rhino 3176 Med Hardener 8 Lb","description":"\u003cp\u003e1307 Low Viscosity Resin \/ H-3102 Fast Epoxy Hardener - 100% solids two component epoxy laminating system with excellent wet out, low viscosity and high strength. Very low odor and toxicity. Easy to use, Mix Ratio: 4:1 by volume; 100:22 by weight. Gel Time: 12-15 minutes @ 77°F (150 grams). Fast curing products for a variety of use applications. Used for fast curing, penetrating wood coatings, adhesives and sealers, fiberglass laminating and microsphere filled fairing compounds. Excellent cold temperature cures down to 40 degrees F. No solvents or VOCs. Non-hazardous, non-corrosive hardener. H-3176 30-minute Medium R\/T Epoxy Hardener- Safety Press Molding Epoxy Hardner. Good low temperature cure. Fast wetting of fiberglass reinforcements. Easy to use 4:1 mix ratio by volume; 100:22 by weight. Gel time: 25-30 minutes @ 77°F (150 grams). High HDT at room temp, increasing with post cure. Low toxicity, very low odor. Non-hazmat.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eManufacturer Part #:\u003c\/strong\u003e 3176EI\/8\u003c\/p\u003e","brand":"Aircraft Spruce","offers":[{"title":"Default Title","offer_id":54219841306966,"sku":"01-07922","price":204.33,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1037\/0164\/3606\/files\/jeffco_4a837161-29d0-4813-a18b-1c6b0eb63e60.jpg?v=1781651794"},{"product_id":"01-07923","title":"Rhino 3176 Med Hardener 2 Lb","description":"\u003cp\u003e1307 Low Viscosity Resin \/ H-3102 Fast Epoxy Hardener - 100% solids two component epoxy laminating system with excellent wet out, low viscosity and high strength. Very low odor and toxicity. Easy to use, Mix Ratio: 4:1 by volume; 100:22 by weight. Gel Time: 12-15 minutes @ 77°F (150 grams). Fast curing products for a variety of use applications. Used for fast curing, penetrating wood coatings, adhesives and sealers, fiberglass laminating and microsphere filled fairing compounds. Excellent cold temperature cures down to 40 degrees F. No solvents or VOCs. Non-hazardous, non-corrosive hardener. H-3176 30-minute Medium R\/T Epoxy Hardener- Safety Press Molding Epoxy Hardner. Good low temperature cure. Fast wetting of fiberglass reinforcements. Easy to use 4:1 mix ratio by volume; 100:22 by weight. Gel time: 25-30 minutes @ 77°F (150 grams). High HDT at room temp, increasing with post cure. Low toxicity, very low odor. Non-hazmat.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eManufacturer Part #:\u003c\/strong\u003e 3176EI\/2\u003c\/p\u003e","brand":"Aircraft Spruce","offers":[{"title":"Default Title","offer_id":54219841372502,"sku":"01-07923","price":58.8,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1037\/0164\/3606\/files\/jeffco_2396163f-690d-4409-a20b-2482c874b76a.jpg?v=1781651796"},{"product_id":"01-07924","title":"Rhino 1 Gallon Kit Medium","description":"\u003cp\u003e1307 Low Viscosity Resin \/ H-3102 Fast Epoxy Hardener - 100% solids two component epoxy laminating system with excellent wet out, low viscosity and high strength. Very low odor and toxicity. Easy to use, Mix Ratio: 4:1 by volume; 100:22 by weight. Gel Time: 12-15 minutes @ 77°F (150 grams). Fast curing products for a variety of use applications. Used for fast curing, penetrating wood coatings, adhesives and sealers, fiberglass laminating and microsphere filled fairing compounds. Excellent cold temperature cures down to 40 degrees F. No solvents or VOCs. Non-hazardous, non-corrosive hardener. H-3176 30-minute Medium R\/T Epoxy Hardener- Safety Press Molding Epoxy Hardner. Good low temperature cure. Fast wetting of fiberglass reinforcements. Easy to use 4:1 mix ratio by volume; 100:22 by weight. Gel time: 25-30 minutes @ 77°F (150 grams). High HDT at room temp, increasing with post cure. Low toxicity, very low odor. Non-hazmat.\u003c\/p\u003e","brand":"Aircraft Spruce","offers":[{"title":"Default Title","offer_id":54219841569110,"sku":"01-07924","price":225.33,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1037\/0164\/3606\/files\/jeffco_d385b57b-43fe-4b51-b1d5-72444658e98b.jpg?v=1781651800"},{"product_id":"01-07925","title":"Rhino Lv 1307 5 Gallon Kit Med","description":"\u003cp\u003e1307 Low Viscosity Resin \/ H-3102 Fast Epoxy Hardener - 100% solids two component epoxy laminating system with excellent wet out, low viscosity and high strength. Very low odor and toxicity. Easy to use, Mix Ratio: 4:1 by volume; 100:22 by weight. Gel Time: 12-15 minutes @ 77°F (150 grams). Fast curing products for a variety of use applications. Used for fast curing, penetrating wood coatings, adhesives and sealers, fiberglass laminating and microsphere filled fairing compounds. Excellent cold temperature cures down to 40 degrees F. No solvents or VOCs. Non-hazardous, non-corrosive hardener. H-3176 30-minute Medium R\/T Epoxy Hardener- Safety Press Molding Epoxy Hardner. Good low temperature cure. Fast wetting of fiberglass reinforcements. Easy to use 4:1 mix ratio by volume; 100:22 by weight. Gel time: 25-30 minutes @ 77°F (150 grams). High HDT at room temp, increasing with post cure. Low toxicity, very low odor. Non-hazmat.\u003c\/p\u003e","brand":"Aircraft Spruce","offers":[{"title":"Default Title","offer_id":54219841634646,"sku":"01-07925","price":1132.6,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1037\/0164\/3606\/files\/jeffco_d1f7a23e-fe75-446c-b202-5bda83cef8da.jpg?v=1781651801"}],"url":"https:\/\/www.aircraftpartseurope.com\/collections\/epoxy.oembed","provider":"Aircraft Parts Europe","version":"1.0","type":"link"}