{"title":"Poly-Fiber","description":"\u003cp\u003ePoly-Fiber — part of our Covering Supplies range. Quality aircraft parts delivered across the UK and Europe.\u003c\/p\u003e","products":[{"product_id":"09-02200","title":"Poly-Fiber P-103 Pinked Tape 1 X 25 Yd","description":"\u003cp\u003eThis FAA approved process utilizing Poly-Fiber Dacron fabrics and the unique \"Poly\" line of finishes assures a beautiful, durable, weather-resistant cover job every time. Documented time tested results by the professionals. The Poly-Fiber Covering Process was issued Supplemental Type Certificate No. SA-1008-WE in 1965 and this number will apply to all aircraft.Note: Formerly known as Stits covering process. Only Poly-Fiber materials may be used through the topcoat paint to comply with STC requirements. Poly-Fiber finishes are required for approval. Poly-Fiber is approved for use on most certified aircraft. To be sure, check the approved model list in the procedure manual.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eManufacturer Part #:\u003c\/strong\u003e 1-MEDIUM1\u003c\/p\u003e","brand":"Poly-Fiber","offers":[{"title":"Default Title","offer_id":54255137653078,"sku":"09-02200","price":44.17,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1037\/0164\/3606\/files\/pflogo.jpg?v=1781867339"},{"product_id":"09-02300","title":"Poly-Fiber P-106 Pinked Tape 1 X 25 Yd","description":"\u003cp\u003eThis FAA approved process utilizing Poly-Fiber Dacron fabrics and the unique \"Poly\" line of finishes assures a beautiful, durable, weather-resistant cover job every time. Documented time tested results by the professionals. The Poly-Fiber Covering Process was issued Supplemental Type Certificate No. SA-1008-WE in 1965 and this number will apply to all aircraft.Note: Formerly known as Stits covering process. Only Poly-Fiber materials may be used through the topcoat paint to comply with STC requirements. Poly-Fiber finishes are required for approval. Poly-Fiber is approved for use on most certified aircraft. To be sure, check the approved model list in the procedure manual.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eManufacturer Part #:\u003c\/strong\u003e 1-LIGHT1\u003c\/p\u003e","brand":"Poly-Fiber","offers":[{"title":"Default Title","offer_id":54255156494678,"sku":"09-02300","price":44.17,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1037\/0164\/3606\/files\/pflogo_48d8af8c-176c-4e3c-8c8e-55d82726652c.jpg?v=1781867608"},{"product_id":"09-02350","title":"Poly-Fiber P-106 Pinked Tape 1 1\/2 X 25 Yd","description":"\u003cp\u003eThis FAA approved process utilizing Poly-Fiber Dacron fabrics and the unique \"Poly\" line of finishes assures a beautiful, durable, weather-resistant cover job every time. Documented time tested results by the professionals. The Poly-Fiber Covering Process was issued Supplemental Type Certificate No. SA-1008-WE in 1965 and this number will apply to all aircraft.Note: Formerly known as Stits covering process. Only Poly-Fiber materials may be used through the topcoat paint to comply with STC requirements. Poly-Fiber finishes are required for approval. Poly-Fiber is approved for use on most certified aircraft. To be sure, check the approved model list in the procedure manual.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eManufacturer Part #:\u003c\/strong\u003e 1-LIGHT15\u003c\/p\u003e","brand":"Poly-Fiber","offers":[{"title":"Default Title","offer_id":54255157674326,"sku":"09-02350","price":48.3,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1037\/0164\/3606\/files\/pflogo_eda0e228-76c9-421b-af3e-b063c14e58fa.jpg?v=1781867619"},{"product_id":"09-02400","title":"Poly-Fiber P-103 Pinked Tape 1 1\/2 X 25 Yd","description":"\u003cp\u003eThis FAA approved process utilizing Poly-Fiber Dacron fabrics and the unique \"Poly\" line of finishes assures a beautiful, durable, weather-resistant cover job every time. Documented time tested results by the professionals. The Poly-Fiber Covering Process was issued Supplemental Type Certificate No. SA-1008-WE in 1965 and this number will apply to all aircraft.Note: Formerly known as Stits covering process. Only Poly-Fiber materials may be used through the topcoat paint to comply with STC requirements. Poly-Fiber finishes are required for approval. Poly-Fiber is approved for use on most certified aircraft. To be sure, check the approved model list in the procedure manual.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eManufacturer Part #:\u003c\/strong\u003e 1-MEDIUM15\u003c\/p\u003e","brand":"Poly-Fiber","offers":[{"title":"Default Title","offer_id":54255157870934,"sku":"09-02400","price":48.3,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1037\/0164\/3606\/files\/pflogo_ced43683-2cd3-42f1-9e85-f2c95fd77ce2.jpg?v=1781867630"},{"product_id":"09-02450","title":"Poly-Fiber P-103 Pinked Tape 2 X 25 Yd","description":"\u003cp\u003eThis FAA approved process utilizing Poly-Fiber Dacron fabrics and the unique \"Poly\" line of finishes assures a beautiful, durable, weather-resistant cover job every time. Documented time tested results by the professionals. The Poly-Fiber Covering Process was issued Supplemental Type Certificate No. SA-1008-WE in 1965 and this number will apply to all aircraft.Note: Formerly known as Stits covering process. Only Poly-Fiber materials may be used through the topcoat paint to comply with STC requirements. Poly-Fiber finishes are required for approval. Poly-Fiber is approved for use on most certified aircraft. To be sure, check the approved model list in the procedure manual.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eManufacturer Part #:\u003c\/strong\u003e 1-MEDIUM2X25\u003c\/p\u003e","brand":"Poly-Fiber","offers":[{"title":"Default Title","offer_id":54255158395222,"sku":"09-02450","price":58.1,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1037\/0164\/3606\/files\/pflogo_5739ef45-622d-4345-ad5f-818929e7b655.jpg?v=1781867644"},{"product_id":"09-02500","title":"Poly-Fiber P-103 Pinked Tape 2 X 50 Yd","description":"\u003cp\u003eThis FAA approved process utilizing Poly-Fiber Dacron fabrics and the unique \"Poly\" line of finishes assures a beautiful, durable, weather-resistant cover job every time. Documented time tested results by the professionals. The Poly-Fiber Covering Process was issued Supplemental Type Certificate No. SA-1008-WE in 1965 and this number will apply to all aircraft.Note: Formerly known as Stits covering process. Only Poly-Fiber materials may be used through the topcoat paint to comply with STC requirements. Poly-Fiber finishes are required for approval. Poly-Fiber is approved for use on most certified aircraft. To be sure, check the approved model list in the procedure manual.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eManufacturer Part #:\u003c\/strong\u003e 1-MEDIUM2\u003c\/p\u003e","brand":"Poly-Fiber","offers":[{"title":"Default Title","offer_id":54255158427990,"sku":"09-02500","price":72.45,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1037\/0164\/3606\/files\/pflogo_55e7b867-0db1-48e0-b69a-4e77dd157d90.jpg?v=1781867646"},{"product_id":"09-02700","title":"Poly-Fiber P-106 Pinked Tape 2 X 50 Yd","description":"\u003cp\u003eThis FAA approved process utilizing Poly-Fiber Dacron fabrics and the unique \"Poly\" line of finishes assures a beautiful, durable, weather-resistant cover job every time. Documented time tested results by the professionals. The Poly-Fiber Covering Process was issued Supplemental Type Certificate No. SA-1008-WE in 1965 and this number will apply to all aircraft.Note: Formerly known as Stits covering process. Only Poly-Fiber materials may be used through the topcoat paint to comply with STC requirements. Poly-Fiber finishes are required for approval. Poly-Fiber is approved for use on most certified aircraft. To be sure, check the approved model list in the procedure manual.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eManufacturer Part #:\u003c\/strong\u003e 1-LIGHT2\u003c\/p\u003e","brand":"Poly-Fiber","offers":[{"title":"Default Title","offer_id":54255164129622,"sku":"09-02700","price":69.93,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1037\/0164\/3606\/files\/pflogo_055a6907-506f-4a1e-a42b-feb150bbbab4.jpg?v=1781867667"},{"product_id":"09-02705","title":"Poly-Fiber P106 Pinked Light Tape 2 X 25 Yd","description":"\u003cp\u003eThis FAA approved process utilizing Poly-Fiber Dacron fabrics and the unique \"Poly\" line of finishes assures a beautiful, durable, weather-resistant cover job every time. Documented time tested results by the professionals. The Poly-Fiber Covering Process was issued Supplemental Type Certificate No. SA-1008-WE in 1965 and this number will apply to all aircraft.Note: Formerly known as Stits covering process. Only Poly-Fiber materials may be used through the topcoat paint to comply with STC requirements. Poly-Fiber finishes are required for approval. Poly-Fiber is approved for use on most certified aircraft. To be sure, check the approved model list in the procedure manual.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eManufacturer Part #:\u003c\/strong\u003e 1-LIGHT2X25\u003c\/p\u003e","brand":"Poly-Fiber","offers":[{"title":"Default Title","offer_id":54255164195158,"sku":"09-02705","price":57.05,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1037\/0164\/3606\/files\/pflogo_ad10c305-6a83-4719-9aff-0e0a215f0fb7.jpg?v=1781867670"},{"product_id":"09-02900","title":"Poly-Fiber P-103 Pinked Tape 3 X 25 Yd","description":"\u003cp\u003eThis FAA approved process utilizing Poly-Fiber Dacron fabrics and the unique \"Poly\" line of finishes assures a beautiful, durable, weather-resistant cover job every time. Documented time tested results by the professionals. The Poly-Fiber Covering Process was issued Supplemental Type Certificate No. SA-1008-WE in 1965 and this number will apply to all aircraft.Note: Formerly known as Stits covering process. Only Poly-Fiber materials may be used through the topcoat paint to comply with STC requirements. Poly-Fiber finishes are required for approval. Poly-Fiber is approved for use on most certified aircraft. To be sure, check the approved model list in the procedure manual.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eManufacturer Part #:\u003c\/strong\u003e 1-MEDIUM3\u003c\/p\u003e","brand":"Poly-Fiber","offers":[{"title":"Default Title","offer_id":54255164260694,"sku":"09-02900","price":69.72,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1037\/0164\/3606\/files\/pflogo_053a048d-7718-4a72-b339-b78df880e829.jpg?v=1781867672"},{"product_id":"09-03100","title":"Poly-Fiber P-106 Pinked Tape 3 X 25 Yd","description":"\u003cp\u003eThis FAA approved process utilizing Poly-Fiber Dacron fabrics and the unique \"Poly\" line of finishes assures a beautiful, durable, weather-resistant cover job every time. Documented time tested results by the professionals. The Poly-Fiber Covering Process was issued Supplemental Type Certificate No. SA-1008-WE in 1965 and this number will apply to all aircraft.Note: Formerly known as Stits covering process. Only Poly-Fiber materials may be used through the topcoat paint to comply with STC requirements. Poly-Fiber finishes are required for approval. Poly-Fiber is approved for use on most certified aircraft. To be sure, check the approved model list in the procedure manual.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eManufacturer Part #:\u003c\/strong\u003e 1-LIGHT3\u003c\/p\u003e","brand":"Poly-Fiber","offers":[{"title":"Default Title","offer_id":54255165505878,"sku":"09-03100","price":69.72,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1037\/0164\/3606\/files\/pflogo_fc1c80ff-7976-4746-9d5a-4d152b000f0a.jpg?v=1781867695"},{"product_id":"09-03300","title":"Poly-Fiber P-103 Pinked Tape 4 X 25 Yd","description":"\u003cp\u003eThis FAA approved process utilizing Poly-Fiber Dacron fabrics and the unique \"Poly\" line of finishes assures a beautiful, durable, weather-resistant cover job every time. Documented time tested results by the professionals. The Poly-Fiber Covering Process was issued Supplemental Type Certificate No. SA-1008-WE in 1965 and this number will apply to all aircraft.Note: Formerly known as Stits covering process. Only Poly-Fiber materials may be used through the topcoat paint to comply with STC requirements. Poly-Fiber finishes are required for approval. Poly-Fiber is approved for use on most certified aircraft. To be sure, check the approved model list in the procedure manual.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eManufacturer Part #:\u003c\/strong\u003e 1-MEDIUM4\u003c\/p\u003e","brand":"Poly-Fiber","offers":[{"title":"Default Title","offer_id":54255178023254,"sku":"09-03300","price":79.59,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1037\/0164\/3606\/files\/pflogo_a15926eb-55bb-4e5b-a94e-a74747e5f2a6.jpg?v=1781867839"},{"product_id":"09-03350","title":"Poly-Fiber P-103 Pinked Tape 6 X 25 Yd","description":"\u003cp\u003eThis FAA approved process utilizing Poly-Fiber Dacron fabrics and the unique \"Poly\" line of finishes assures a beautiful, durable, weather-resistant cover job every time. Documented time tested results by the professionals. The Poly-Fiber Covering Process was issued Supplemental Type Certificate No. SA-1008-WE in 1965 and this number will apply to all aircraft.Note: Formerly known as Stits covering process. Only Poly-Fiber materials may be used through the topcoat paint to comply with STC requirements. Poly-Fiber finishes are required for approval. Poly-Fiber is approved for use on most certified aircraft. To be sure, check the approved model list in the procedure manual.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eManufacturer Part #:\u003c\/strong\u003e 1-MEDIUM6\u003c\/p\u003e","brand":"Poly-Fiber","offers":[{"title":"Default Title","offer_id":54255178154326,"sku":"09-03350","price":103.25,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1037\/0164\/3606\/files\/pflogo_c7934c20-25fa-49e6-9e50-41b7ecfbb4f8.jpg?v=1781867841"},{"product_id":"09-03400","title":"Poly-Fiber P-106 Pinked Tape 4 X 25 Yd","description":"\u003cp\u003eThis FAA approved process utilizing Poly-Fiber Dacron fabrics and the unique \"Poly\" line of finishes assures a beautiful, durable, weather-resistant cover job every time. Documented time tested results by the professionals. The Poly-Fiber Covering Process was issued Supplemental Type Certificate No. SA-1008-WE in 1965 and this number will apply to all aircraft.Note: Formerly known as Stits covering process. Only Poly-Fiber materials may be used through the topcoat paint to comply with STC requirements. Poly-Fiber finishes are required for approval. Poly-Fiber is approved for use on most certified aircraft. To be sure, check the approved model list in the procedure manual.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eManufacturer Part #:\u003c\/strong\u003e 1-LIGHT4\u003c\/p\u003e","brand":"Poly-Fiber","offers":[{"title":"Default Title","offer_id":54255178187094,"sku":"09-03400","price":78.05,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1037\/0164\/3606\/files\/pflogo_33a46f33-58e0-42bf-bb54-3bc633036bdf.jpg?v=1781867842"},{"product_id":"09-03545","title":"Poly-Fiber P-106 Pinked Tape 6 X 25 Yd","description":"\u003cp\u003eThis FAA approved process utilizing Poly-Fiber Dacron fabrics and the unique \"Poly\" line of finishes assures a beautiful, durable, weather-resistant cover job every time. Documented time tested results by the professionals. The Poly-Fiber Covering Process was issued Supplemental Type Certificate No. SA-1008-WE in 1965 and this number will apply to all aircraft.Note: Formerly known as Stits covering process. Only Poly-Fiber materials may be used through the topcoat paint to comply with STC requirements. Poly-Fiber finishes are required for approval. Poly-Fiber is approved for use on most certified aircraft. To be sure, check the approved model list in the procedure manual.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eManufacturer Part #:\u003c\/strong\u003e 1-LIGHT6\u003c\/p\u003e","brand":"Poly-Fiber","offers":[{"title":"Default Title","offer_id":54255178350934,"sku":"09-03545","price":103.25,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1037\/0164\/3606\/files\/pflogo_1b3af451-0ae9-452c-9024-39fb8cbd35d5.jpg?v=1781867848"},{"product_id":"09-03565","title":"Poly-Fiber Pinked Bias Tape 2 X 25 Yd","description":"\u003cp\u003eThis FAA approved process utilizing Poly-Fiber Dacron fabrics and the unique \"Poly\" line of finishes assures a beautiful, durable, weather-resistant cover job every time. Documented time tested results by the professionals. The Poly-Fiber Covering Process was issued Supplemental Type Certificate No. SA-1008-WE in 1965 and this number will apply to all aircraft.Note: Formerly known as Stits covering process. Only Poly-Fiber materials may be used through the topcoat paint to comply with STC requirements. Poly-Fiber finishes are required for approval. Poly-Fiber is approved for use on most certified aircraft. To be sure, check the approved model list in the procedure manual.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eManufacturer Part #:\u003c\/strong\u003e 1-BIAS2\u003c\/p\u003e","brand":"Poly-Fiber","offers":[{"title":"Default Title","offer_id":54255178383702,"sku":"09-03565","price":67.9,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1037\/0164\/3606\/files\/pflogo_68aad72c-0a80-49b6-95c0-ec1974f56c2b.jpg?v=1781867849"},{"product_id":"09-03570","title":"Poly-Fiber Pinked Bias Tape 3 X 25 Yd","description":"\u003cp\u003eThis FAA approved process utilizing Poly-Fiber Dacron fabrics and the unique \"Poly\" line of finishes assures a beautiful, durable, weather-resistant cover job every time. Documented time tested results by the professionals. The Poly-Fiber Covering Process was issued Supplemental Type Certificate No. SA-1008-WE in 1965 and this number will apply to all aircraft.Note: Formerly known as Stits covering process. Only Poly-Fiber materials may be used through the topcoat paint to comply with STC requirements. Poly-Fiber finishes are required for approval. Poly-Fiber is approved for use on most certified aircraft. To be sure, check the approved model list in the procedure manual.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eManufacturer Part #:\u003c\/strong\u003e 1-BIAS3\u003c\/p\u003e","brand":"Poly-Fiber","offers":[{"title":"Default Title","offer_id":54255178449238,"sku":"09-03570","price":97.93,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1037\/0164\/3606\/files\/pflogo_bc080f48-6d5e-48ec-af78-c4f84f62ed92.jpg?v=1781867850"},{"product_id":"09-03580","title":"Poly-Fiber Pinked Bias Tape 4 X 25 Yd","description":"\u003cp\u003eThis FAA approved process utilizing Poly-Fiber Dacron fabrics and the unique \"Poly\" line of finishes assures a beautiful, durable, weather-resistant cover job every time. Documented time tested results by the professionals. The Poly-Fiber Covering Process was issued Supplemental Type Certificate No. SA-1008-WE in 1965 and this number will apply to all aircraft.Note: Formerly known as Stits covering process. Only Poly-Fiber materials may be used through the topcoat paint to comply with STC requirements. Poly-Fiber finishes are required for approval. Poly-Fiber is approved for use on most certified aircraft. To be sure, check the approved model list in the procedure manual.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eManufacturer Part #:\u003c\/strong\u003e 1-BIAS4\u003c\/p\u003e","brand":"Poly-Fiber","offers":[{"title":"Default Title","offer_id":54255178514774,"sku":"09-03580","price":118.86,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1037\/0164\/3606\/files\/pflogo_3a06c6f3-4eaf-4aa0-b210-82c5837ae9dd.jpg?v=1781867852"},{"product_id":"09-03869","title":"Poly-Fiber Mark II Clear Base Quart","description":"\u003cp\u003eMark II for Metal. Not for use on fabric. Note: Do not use Mark II over fabric or on structures that will be covered with fabric cemented with New Super Seam cement or with Polytak cement. New SuperSeam or Polytak may lift Mark II.Use: Mark II for Metal is available in the same 50 colors as Colored Butyrate Dope. Mark II is used over primed metal or composite parts and is too brittle to be used over fabric.Mark II is a tough, long-lasting topcoat paint. Although Mark II is a two-part-catalyzed paint, it is not catalyzed with an isocyanate, thus normal safety equipment (a charcoal filtered spray mask) is sufficient. You do not have to use a supplied air respirator when spraying Mark II.Packaging: Mark II comes in three-part kits: part one is a can of the colored paint; part two is a separate can with an equal volume of Mixing Liquid, and part three is a thinner to be used to prevent orange peel.Coverage: One mixed gallon kit (one gallon paint, one gallon Mixing Liquid) yields two gallons of sprayable paint. These two gallons will cover approximately 400 square feet with one coat.Mixing: Combine one part of paint with one volume Mixing Liquid. Let stand for 20 minutes to allow the catalyst to work.Thinning: For most conditions, try using it directly out of the can with no thinning. If orange peel results, thin 5 parts mixedpaint to one part Mark II Thinner.Application: Spray two or three coats one hour apart.Two coats may be sufficient. Allow overnight drying before moving parts. Mark II takes longer to dry than one-part paints. It may be slightly tacky for 24 hours. Shelf Life: Four years in unopened storage.Important Notice: All mixed paints are special order and are non-returnable.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eManufacturer Part #:\u003c\/strong\u003e 18-BASE3\u003c\/p\u003e","brand":"Poly-Fiber","offers":[{"title":"Default Title","offer_id":54255179694422,"sku":"09-03869","price":120.05,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1037\/0164\/3606\/files\/09-03869.jpg?v=1781867870"},{"product_id":"09-03871","title":"Poly-Fiber Mark II Clear Base Gallon","description":"\u003cp\u003eMark II for Metal. Not for use on fabric. Note: Do not use Mark II over fabric or on structures that will be covered with fabric cemented with New Super Seam cement or with Polytak cement. New SuperSeam or Polytak may lift Mark II.Use: Mark II for Metal is available in the same 50 colors as Colored Butyrate Dope. Mark II is used over primed metal or composite parts and is too brittle to be used over fabric.Mark II is a tough, long-lasting topcoat paint. Although Mark II is a two-part-catalyzed paint, it is not catalyzed with an isocyanate, thus normal safety equipment (a charcoal filtered spray mask) is sufficient. You do not have to use a supplied air respirator when spraying Mark II.Packaging: Mark II comes in three-part kits: part one is a can of the colored paint; part two is a separate can with an equal volume of Mixing Liquid, and part three is a thinner to be used to prevent orange peel.Coverage: One mixed gallon kit (one gallon paint, one gallon Mixing Liquid) yields two gallons of sprayable paint. These two gallons will cover approximately 400 square feet with one coat.Mixing: Combine one part of paint with one volume Mixing Liquid. Let stand for 20 minutes to allow the catalyst to work.Thinning: For most conditions, try using it directly out of the can with no thinning. If orange peel results, thin 5 parts mixedpaint to one part Mark II Thinner.Application: Spray two or three coats one hour apart.Two coats may be sufficient. Allow overnight drying before moving parts. Mark II takes longer to dry than one-part paints. It may be slightly tacky for 24 hours. Shelf Life: Four years in unopened storage.Important Notice: All mixed paints are special order and are non-returnable.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eManufacturer Part #:\u003c\/strong\u003e 18-BASE4\u003c\/p\u003e","brand":"Poly-Fiber","offers":[{"title":"Default Title","offer_id":54255180120406,"sku":"09-03871","price":372.33,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1037\/0164\/3606\/files\/09-03869_9037479e-f2c4-456f-9e89-fbb70a180406.jpg?v=1781867871"},{"product_id":"09-03872","title":"Poly-Fiber Mark II Metallic Base Quart","description":"\u003cp\u003eMark II for Metal. Not for use on fabric. Note: Do not use Mark II over fabric or on structures that will be covered with fabric cemented with New Super Seam cement or with Polytak cement. New SuperSeam or Polytak may lift Mark II.Use: Mark II for Metal is available in the same 50 colors as Colored Butyrate Dope. Mark II is used over primed metal or composite parts and is too brittle to be used over fabric.Mark II is a tough, long-lasting topcoat paint. Although Mark II is a two-part-catalyzed paint, it is not catalyzed with an isocyanate, thus normal safety equipment (a charcoal filtered spray mask) is sufficient. You do not have to use a supplied air respirator when spraying Mark II.Packaging: Mark II comes in three-part kits: part one is a can of the colored paint; part two is a separate can with an equal volume of Mixing Liquid, and part three is a thinner to be used to prevent orange peel.Coverage: One mixed gallon kit (one gallon paint, one gallon Mixing Liquid) yields two gallons of sprayable paint. These two gallons will cover approximately 400 square feet with one coat.Mixing: Combine one part of paint with one volume Mixing Liquid. Let stand for 20 minutes to allow the catalyst to work.Thinning: For most conditions, try using it directly out of the can with no thinning. If orange peel results, thin 5 parts mixedpaint to one part Mark II Thinner.Application: Spray two or three coats one hour apart.Two coats may be sufficient. Allow overnight drying before moving parts. Mark II takes longer to dry than one-part paints. It may be slightly tacky for 24 hours. Shelf Life: Four years in unopened storage.Important Notice: All mixed paints are special order and are non-returnable.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eManufacturer Part #:\u003c\/strong\u003e 18-BASEM3\u003c\/p\u003e","brand":"Poly-Fiber","offers":[{"title":"Default Title","offer_id":54255180284246,"sku":"09-03872","price":122.85,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1037\/0164\/3606\/files\/09-03869_f1ae21aa-b1cb-449b-873e-42adc282e75d.jpg?v=1781867872"},{"product_id":"09-03873","title":"Poly-Fiber Mark II Metallic Base Gl","description":"\u003cp\u003eMark II for Metal. Not for use on fabric. Note: Do not use Mark II over fabric or on structures that will be covered with fabric cemented with New Super Seam cement or with Polytak cement. New SuperSeam or Polytak may lift Mark II.Use: Mark II for Metal is available in the same 50 colors as Colored Butyrate Dope. Mark II is used over primed metal or composite parts and is too brittle to be used over fabric.Mark II is a tough, long-lasting topcoat paint. Although Mark II is a two-part-catalyzed paint, it is not catalyzed with an isocyanate, thus normal safety equipment (a charcoal filtered spray mask) is sufficient. You do not have to use a supplied air respirator when spraying Mark II.Packaging: Mark II comes in three-part kits: part one is a can of the colored paint; part two is a separate can with an equal volume of Mixing Liquid, and part three is a thinner to be used to prevent orange peel.Coverage: One mixed gallon kit (one gallon paint, one gallon Mixing Liquid) yields two gallons of sprayable paint. These two gallons will cover approximately 400 square feet with one coat.Mixing: Combine one part of paint with one volume Mixing Liquid. Let stand for 20 minutes to allow the catalyst to work.Thinning: For most conditions, try using it directly out of the can with no thinning. If orange peel results, thin 5 parts mixedpaint to one part Mark II Thinner.Application: Spray two or three coats one hour apart.Two coats may be sufficient. Allow overnight drying before moving parts. Mark II takes longer to dry than one-part paints. It may be slightly tacky for 24 hours. Shelf Life: Four years in unopened storage.Important Notice: All mixed paints are special order and are non-returnable.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eManufacturer Part #:\u003c\/strong\u003e 18-BASEM4\u003c\/p\u003e","brand":"Poly-Fiber","offers":[{"title":"Default Title","offer_id":54255180644694,"sku":"09-03873","price":382.13,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1037\/0164\/3606\/files\/09-03869_586700b2-47a3-46ae-b37d-daa45dadd4c8.jpg?v=1781867873"},{"product_id":"09-03876","title":"Poly-Fiber Mark II 105 Insignia White Quart","description":"\u003cp\u003eMark II for Metal. Not for use on fabric. Note: Do not use Mark II over fabric or on structures that will be covered with fabric cemented with New Super Seam cement or with Polytak cement. New SuperSeam or Polytak may lift Mark II.Use: Mark II for Metal is available in the same 50 colors as Colored Butyrate Dope. Mark II is used over primed metal or composite parts and is too brittle to be used over fabric.Mark II is a tough, long-lasting topcoat paint. Although Mark II is a two-part-catalyzed paint, it is not catalyzed with an isocyanate, thus normal safety equipment (a charcoal filtered spray mask) is sufficient. You do not have to use a supplied air respirator when spraying Mark II.Packaging: Mark II comes in three-part kits: part one is a can of the colored paint; part two is a separate can with an equal volume of Mixing Liquid, and part three is a thinner to be used to prevent orange peel.Coverage: One mixed gallon kit (one gallon paint, one gallon Mixing Liquid) yields two gallons of sprayable paint. These two gallons will cover approximately 400 square feet with one coat.Mixing: Combine one part of paint with one volume Mixing Liquid. Let stand for 20 minutes to allow the catalyst to work.Thinning: For most conditions, try using it directly out of the can with no thinning. If orange peel results, thin 5 parts mixedpaint to one part Mark II Thinner.Application: Spray two or three coats one hour apart.Two coats may be sufficient. Allow overnight drying before moving parts. Mark II takes longer to dry than one-part paints. It may be slightly tacky for 24 hours. Shelf Life: Four years in unopened storage.Important Notice: All mixed paints are special order and are non-returnable.\u003c\/p\u003e","brand":"Poly-Fiber","offers":[{"title":"Default Title","offer_id":54255180808534,"sku":"09-03876","price":307.93,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1037\/0164\/3606\/files\/09-03869_85270378-dc9a-43b5-a693-3eaee93143b2.jpg?v=1781867875"},{"product_id":"09-03877","title":"Poly-Fiber Mark II 105 Insignia White Gal","description":"\u003cp\u003eMark II for Metal. Not for use on fabric. Note: Do not use Mark II over fabric or on structures that will be covered with fabric cemented with New Super Seam cement or with Polytak cement. New SuperSeam or Polytak may lift Mark II.Use: Mark II for Metal is available in the same 50 colors as Colored Butyrate Dope. Mark II is used over primed metal or composite parts and is too brittle to be used over fabric.Mark II is a tough, long-lasting topcoat paint. Although Mark II is a two-part-catalyzed paint, it is not catalyzed with an isocyanate, thus normal safety equipment (a charcoal filtered spray mask) is sufficient. You do not have to use a supplied air respirator when spraying Mark II.Packaging: Mark II comes in three-part kits: part one is a can of the colored paint; part two is a separate can with an equal volume of Mixing Liquid, and part three is a thinner to be used to prevent orange peel.Coverage: One mixed gallon kit (one gallon paint, one gallon Mixing Liquid) yields two gallons of sprayable paint. These two gallons will cover approximately 400 square feet with one coat.Mixing: Combine one part of paint with one volume Mixing Liquid. Let stand for 20 minutes to allow the catalyst to work.Thinning: For most conditions, try using it directly out of the can with no thinning. If orange peel results, thin 5 parts mixedpaint to one part Mark II Thinner.Application: Spray two or three coats one hour apart.Two coats may be sufficient. Allow overnight drying before moving parts. Mark II takes longer to dry than one-part paints. It may be slightly tacky for 24 hours. Shelf Life: Four years in unopened storage.Important Notice: All mixed paints are special order and are non-returnable.\u003c\/p\u003e","brand":"Poly-Fiber","offers":[{"title":"Default Title","offer_id":54255181037910,"sku":"09-03877","price":985.6,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1037\/0164\/3606\/files\/09-03869_d2f4666b-7dce-499f-aaae-72b93c254899.jpg?v=1781867876"},{"product_id":"09-03878","title":"Poly-Fiber Mark II 110 Juneau White Quart","description":"\u003cp\u003eMark II for Metal. Not for use on fabric. Note: Do not use Mark II over fabric or on structures that will be covered with fabric cemented with New Super Seam cement or with Polytak cement. New SuperSeam or Polytak may lift Mark II.Use: Mark II for Metal is available in the same 50 colors as Colored Butyrate Dope. Mark II is used over primed metal or composite parts and is too brittle to be used over fabric.Mark II is a tough, long-lasting topcoat paint. Although Mark II is a two-part-catalyzed paint, it is not catalyzed with an isocyanate, thus normal safety equipment (a charcoal filtered spray mask) is sufficient. You do not have to use a supplied air respirator when spraying Mark II.Packaging: Mark II comes in three-part kits: part one is a can of the colored paint; part two is a separate can with an equal volume of Mixing Liquid, and part three is a thinner to be used to prevent orange peel.Coverage: One mixed gallon kit (one gallon paint, one gallon Mixing Liquid) yields two gallons of sprayable paint. These two gallons will cover approximately 400 square feet with one coat.Mixing: Combine one part of paint with one volume Mixing Liquid. Let stand for 20 minutes to allow the catalyst to work.Thinning: For most conditions, try using it directly out of the can with no thinning. If orange peel results, thin 5 parts mixedpaint to one part Mark II Thinner.Application: Spray two or three coats one hour apart.Two coats may be sufficient. Allow overnight drying before moving parts. Mark II takes longer to dry than one-part paints. It may be slightly tacky for 24 hours. Shelf Life: Four years in unopened storage.Important Notice: All mixed paints are special order and are non-returnable.\u003c\/p\u003e","brand":"Poly-Fiber","offers":[{"title":"Default Title","offer_id":54255182086486,"sku":"09-03878","price":307.93,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1037\/0164\/3606\/files\/09-03869_32517860-cc11-475d-85c1-16d9a210fa2d.jpg?v=1781867878"},{"product_id":"09-03879","title":"Poly-Fiber Mark II 110 Juneau White Gal","description":"\u003cp\u003eMark II for Metal. Not for use on fabric. Note: Do not use Mark II over fabric or on structures that will be covered with fabric cemented with New Super Seam cement or with Polytak cement. New SuperSeam or Polytak may lift Mark II.Use: Mark II for Metal is available in the same 50 colors as Colored Butyrate Dope. Mark II is used over primed metal or composite parts and is too brittle to be used over fabric.Mark II is a tough, long-lasting topcoat paint. Although Mark II is a two-part-catalyzed paint, it is not catalyzed with an isocyanate, thus normal safety equipment (a charcoal filtered spray mask) is sufficient. You do not have to use a supplied air respirator when spraying Mark II.Packaging: Mark II comes in three-part kits: part one is a can of the colored paint; part two is a separate can with an equal volume of Mixing Liquid, and part three is a thinner to be used to prevent orange peel.Coverage: One mixed gallon kit (one gallon paint, one gallon Mixing Liquid) yields two gallons of sprayable paint. These two gallons will cover approximately 400 square feet with one coat.Mixing: Combine one part of paint with one volume Mixing Liquid. Let stand for 20 minutes to allow the catalyst to work.Thinning: For most conditions, try using it directly out of the can with no thinning. If orange peel results, thin 5 parts mixedpaint to one part Mark II Thinner.Application: Spray two or three coats one hour apart.Two coats may be sufficient. Allow overnight drying before moving parts. Mark II takes longer to dry than one-part paints. It may be slightly tacky for 24 hours. Shelf Life: Four years in unopened storage.Important Notice: All mixed paints are special order and are non-returnable.\u003c\/p\u003e","brand":"Poly-Fiber","offers":[{"title":"Default Title","offer_id":54255182152022,"sku":"09-03879","price":946.4,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1037\/0164\/3606\/files\/09-03869_af97d127-e5bd-42aa-aaab-d3f81c03ec5f.jpg?v=1781867881"},{"product_id":"09-03880","title":"Poly-Fiber Mark II 117 Glacier White Quart","description":"\u003cp\u003eMark II for Metal. Not for use on fabric. Note: Do not use Mark II over fabric or on structures that will be covered with fabric cemented with New Super Seam cement or with Polytak cement. New SuperSeam or Polytak may lift Mark II.Use: Mark II for Metal is available in the same 50 colors as Colored Butyrate Dope. Mark II is used over primed metal or composite parts and is too brittle to be used over fabric.Mark II is a tough, long-lasting topcoat paint. Although Mark II is a two-part-catalyzed paint, it is not catalyzed with an isocyanate, thus normal safety equipment (a charcoal filtered spray mask) is sufficient. You do not have to use a supplied air respirator when spraying Mark II.Packaging: Mark II comes in three-part kits: part one is a can of the colored paint; part two is a separate can with an equal volume of Mixing Liquid, and part three is a thinner to be used to prevent orange peel.Coverage: One mixed gallon kit (one gallon paint, one gallon Mixing Liquid) yields two gallons of sprayable paint. These two gallons will cover approximately 400 square feet with one coat.Mixing: Combine one part of paint with one volume Mixing Liquid. Let stand for 20 minutes to allow the catalyst to work.Thinning: For most conditions, try using it directly out of the can with no thinning. If orange peel results, thin 5 parts mixedpaint to one part Mark II Thinner.Application: Spray two or three coats one hour apart.Two coats may be sufficient. Allow overnight drying before moving parts. Mark II takes longer to dry than one-part paints. It may be slightly tacky for 24 hours. Shelf Life: Four years in unopened storage.Important Notice: All mixed paints are special order and are non-returnable.\u003c\/p\u003e","brand":"Poly-Fiber","offers":[{"title":"Default Title","offer_id":54255182217558,"sku":"09-03880","price":307.93,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1037\/0164\/3606\/files\/09-03869_0f9083a0-6099-4896-a4e7-381b332e6edd.jpg?v=1781867883"},{"product_id":"09-03881","title":"Poly-Fiber Mark II 117 Glacier White Gal","description":"\u003cp\u003eMark II for Metal. Not for use on fabric. Note: Do not use Mark II over fabric or on structures that will be covered with fabric cemented with New Super Seam cement or with Polytak cement. New SuperSeam or Polytak may lift Mark II.Use: Mark II for Metal is available in the same 50 colors as Colored Butyrate Dope. Mark II is used over primed metal or composite parts and is too brittle to be used over fabric.Mark II is a tough, long-lasting topcoat paint. Although Mark II is a two-part-catalyzed paint, it is not catalyzed with an isocyanate, thus normal safety equipment (a charcoal filtered spray mask) is sufficient. You do not have to use a supplied air respirator when spraying Mark II.Packaging: Mark II comes in three-part kits: part one is a can of the colored paint; part two is a separate can with an equal volume of Mixing Liquid, and part three is a thinner to be used to prevent orange peel.Coverage: One mixed gallon kit (one gallon paint, one gallon Mixing Liquid) yields two gallons of sprayable paint. These two gallons will cover approximately 400 square feet with one coat.Mixing: Combine one part of paint with one volume Mixing Liquid. Let stand for 20 minutes to allow the catalyst to work.Thinning: For most conditions, try using it directly out of the can with no thinning. If orange peel results, thin 5 parts mixedpaint to one part Mark II Thinner.Application: Spray two or three coats one hour apart.Two coats may be sufficient. Allow overnight drying before moving parts. Mark II takes longer to dry than one-part paints. It may be slightly tacky for 24 hours. Shelf Life: Four years in unopened storage.Important Notice: All mixed paints are special order and are non-returnable.\u003c\/p\u003e","brand":"Poly-Fiber","offers":[{"title":"Default Title","offer_id":54255182250326,"sku":"09-03881","price":987.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1037\/0164\/3606\/files\/09-03869_6ad8050c-e055-4680-beb0-c012066ec80c.jpg?v=1781867886"},{"product_id":"09-03882","title":"Poly-Fiber Mark II 120 Daytona White Quart","description":"\u003cp\u003eMark II for Metal. Not for use on fabric. Note: Do not use Mark II over fabric or on structures that will be covered with fabric cemented with New Super Seam cement or with Polytak cement. New SuperSeam or Polytak may lift Mark II.Use: Mark II for Metal is available in the same 50 colors as Colored Butyrate Dope. Mark II is used over primed metal or composite parts and is too brittle to be used over fabric.Mark II is a tough, long-lasting topcoat paint. Although Mark II is a two-part-catalyzed paint, it is not catalyzed with an isocyanate, thus normal safety equipment (a charcoal filtered spray mask) is sufficient. You do not have to use a supplied air respirator when spraying Mark II.Packaging: Mark II comes in three-part kits: part one is a can of the colored paint; part two is a separate can with an equal volume of Mixing Liquid, and part three is a thinner to be used to prevent orange peel.Coverage: One mixed gallon kit (one gallon paint, one gallon Mixing Liquid) yields two gallons of sprayable paint. These two gallons will cover approximately 400 square feet with one coat.Mixing: Combine one part of paint with one volume Mixing Liquid. Let stand for 20 minutes to allow the catalyst to work.Thinning: For most conditions, try using it directly out of the can with no thinning. If orange peel results, thin 5 parts mixedpaint to one part Mark II Thinner.Application: Spray two or three coats one hour apart.Two coats may be sufficient. Allow overnight drying before moving parts. Mark II takes longer to dry than one-part paints. It may be slightly tacky for 24 hours. Shelf Life: Four years in unopened storage.Important Notice: All mixed paints are special order and are non-returnable.\u003c\/p\u003e","brand":"Poly-Fiber","offers":[{"title":"Default Title","offer_id":54255182315862,"sku":"09-03882","price":305.13,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1037\/0164\/3606\/files\/09-03869_57739da9-7d65-404b-a890-3124f40742f4.jpg?v=1781867890"},{"product_id":"09-03883","title":"Poly-Fiber Mark II 120 Daytona White Gal","description":"\u003cp\u003eMark II for Metal. Not for use on fabric. Note: Do not use Mark II over fabric or on structures that will be covered with fabric cemented with New Super Seam cement or with Polytak cement. New SuperSeam or Polytak may lift Mark II.Use: Mark II for Metal is available in the same 50 colors as Colored Butyrate Dope. Mark II is used over primed metal or composite parts and is too brittle to be used over fabric.Mark II is a tough, long-lasting topcoat paint. Although Mark II is a two-part-catalyzed paint, it is not catalyzed with an isocyanate, thus normal safety equipment (a charcoal filtered spray mask) is sufficient. You do not have to use a supplied air respirator when spraying Mark II.Packaging: Mark II comes in three-part kits: part one is a can of the colored paint; part two is a separate can with an equal volume of Mixing Liquid, and part three is a thinner to be used to prevent orange peel.Coverage: One mixed gallon kit (one gallon paint, one gallon Mixing Liquid) yields two gallons of sprayable paint. These two gallons will cover approximately 400 square feet with one coat.Mixing: Combine one part of paint with one volume Mixing Liquid. Let stand for 20 minutes to allow the catalyst to work.Thinning: For most conditions, try using it directly out of the can with no thinning. If orange peel results, thin 5 parts mixedpaint to one part Mark II Thinner.Application: Spray two or three coats one hour apart.Two coats may be sufficient. Allow overnight drying before moving parts. Mark II takes longer to dry than one-part paints. It may be slightly tacky for 24 hours. Shelf Life: Four years in unopened storage.Important Notice: All mixed paints are special order and are non-returnable.\u003c\/p\u003e","brand":"Poly-Fiber","offers":[{"title":"Default Title","offer_id":54255182381398,"sku":"09-03883","price":949.2,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1037\/0164\/3606\/files\/09-03869_e20638e4-01c6-443a-9968-2a3703eaeb51.jpg?v=1781867891"},{"product_id":"09-03884","title":"Poly-Fiber Mark II 125 Tucson Cream Quart","description":"\u003cp\u003eMark II for Metal. Not for use on fabric. Note: Do not use Mark II over fabric or on structures that will be covered with fabric cemented with New Super Seam cement or with Polytak cement. New SuperSeam or Polytak may lift Mark II.Use: Mark II for Metal is available in the same 50 colors as Colored Butyrate Dope. Mark II is used over primed metal or composite parts and is too brittle to be used over fabric.Mark II is a tough, long-lasting topcoat paint. Although Mark II is a two-part-catalyzed paint, it is not catalyzed with an isocyanate, thus normal safety equipment (a charcoal filtered spray mask) is sufficient. You do not have to use a supplied air respirator when spraying Mark II.Packaging: Mark II comes in three-part kits: part one is a can of the colored paint; part two is a separate can with an equal volume of Mixing Liquid, and part three is a thinner to be used to prevent orange peel.Coverage: One mixed gallon kit (one gallon paint, one gallon Mixing Liquid) yields two gallons of sprayable paint. These two gallons will cover approximately 400 square feet with one coat.Mixing: Combine one part of paint with one volume Mixing Liquid. Let stand for 20 minutes to allow the catalyst to work.Thinning: For most conditions, try using it directly out of the can with no thinning. If orange peel results, thin 5 parts mixedpaint to one part Mark II Thinner.Application: Spray two or three coats one hour apart.Two coats may be sufficient. Allow overnight drying before moving parts. Mark II takes longer to dry than one-part paints. It may be slightly tacky for 24 hours. Shelf Life: Four years in unopened storage.Important Notice: All mixed paints are special order and are non-returnable.\u003c\/p\u003e","brand":"Poly-Fiber","offers":[{"title":"Default Title","offer_id":54255182446934,"sku":"09-03884","price":303.73,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1037\/0164\/3606\/files\/09-03869_af11ac1a-38e2-43c0-9019-ce7d6f75ecd8.jpg?v=1781867892"},{"product_id":"09-03885","title":"Poly-Fiber Mark II 125 Tucson Cream Gal","description":"\u003cp\u003eMark II for Metal. Not for use on fabric. Note: Do not use Mark II over fabric or on structures that will be covered with fabric cemented with New Super Seam cement or with Polytak cement. New SuperSeam or Polytak may lift Mark II.Use: Mark II for Metal is available in the same 50 colors as Colored Butyrate Dope. Mark II is used over primed metal or composite parts and is too brittle to be used over fabric.Mark II is a tough, long-lasting topcoat paint. Although Mark II is a two-part-catalyzed paint, it is not catalyzed with an isocyanate, thus normal safety equipment (a charcoal filtered spray mask) is sufficient. You do not have to use a supplied air respirator when spraying Mark II.Packaging: Mark II comes in three-part kits: part one is a can of the colored paint; part two is a separate can with an equal volume of Mixing Liquid, and part three is a thinner to be used to prevent orange peel.Coverage: One mixed gallon kit (one gallon paint, one gallon Mixing Liquid) yields two gallons of sprayable paint. These two gallons will cover approximately 400 square feet with one coat.Mixing: Combine one part of paint with one volume Mixing Liquid. Let stand for 20 minutes to allow the catalyst to work.Thinning: For most conditions, try using it directly out of the can with no thinning. If orange peel results, thin 5 parts mixedpaint to one part Mark II Thinner.Application: Spray two or three coats one hour apart.Two coats may be sufficient. Allow overnight drying before moving parts. Mark II takes longer to dry than one-part paints. It may be slightly tacky for 24 hours. Shelf Life: Four years in unopened storage.Important Notice: All mixed paints are special order and are non-returnable.\u003c\/p\u003e","brand":"Poly-Fiber","offers":[{"title":"Default Title","offer_id":54255182479702,"sku":"09-03885","price":942.2,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1037\/0164\/3606\/files\/09-03869_80ad3860-6e13-4be3-b4e4-bdab3b272e96.jpg?v=1781867893"},{"product_id":"09-03886","title":"Poly-Fiber Mark II 131 Diana Cream Quart","description":"\u003cp\u003eMark II for Metal. Not for use on fabric. Note: Do not use Mark II over fabric or on structures that will be covered with fabric cemented with New Super Seam cement or with Polytak cement. New SuperSeam or Polytak may lift Mark II.Use: Mark II for Metal is available in the same 50 colors as Colored Butyrate Dope. Mark II is used over primed metal or composite parts and is too brittle to be used over fabric.Mark II is a tough, long-lasting topcoat paint. Although Mark II is a two-part-catalyzed paint, it is not catalyzed with an isocyanate, thus normal safety equipment (a charcoal filtered spray mask) is sufficient. You do not have to use a supplied air respirator when spraying Mark II.Packaging: Mark II comes in three-part kits: part one is a can of the colored paint; part two is a separate can with an equal volume of Mixing Liquid, and part three is a thinner to be used to prevent orange peel.Coverage: One mixed gallon kit (one gallon paint, one gallon Mixing Liquid) yields two gallons of sprayable paint. These two gallons will cover approximately 400 square feet with one coat.Mixing: Combine one part of paint with one volume Mixing Liquid. Let stand for 20 minutes to allow the catalyst to work.Thinning: For most conditions, try using it directly out of the can with no thinning. If orange peel results, thin 5 parts mixedpaint to one part Mark II Thinner.Application: Spray two or three coats one hour apart.Two coats may be sufficient. Allow overnight drying before moving parts. Mark II takes longer to dry than one-part paints. It may be slightly tacky for 24 hours. Shelf Life: Four years in unopened storage.Important Notice: All mixed paints are special order and are non-returnable.\u003c\/p\u003e","brand":"Poly-Fiber","offers":[{"title":"Default Title","offer_id":54255182512470,"sku":"09-03886","price":303.73,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1037\/0164\/3606\/files\/09-03869_c8c0d6d3-6960-40c1-8f8b-4d5c4218308a.jpg?v=1781867895"},{"product_id":"09-03887","title":"Poly-Fiber Mark II 131 Diana Cream Gal","description":"\u003cp\u003eMark II for Metal. Not for use on fabric. Note: Do not use Mark II over fabric or on structures that will be covered with fabric cemented with New Super Seam cement or with Polytak cement. New SuperSeam or Polytak may lift Mark II.Use: Mark II for Metal is available in the same 50 colors as Colored Butyrate Dope. Mark II is used over primed metal or composite parts and is too brittle to be used over fabric.Mark II is a tough, long-lasting topcoat paint. Although Mark II is a two-part-catalyzed paint, it is not catalyzed with an isocyanate, thus normal safety equipment (a charcoal filtered spray mask) is sufficient. You do not have to use a supplied air respirator when spraying Mark II.Packaging: Mark II comes in three-part kits: part one is a can of the colored paint; part two is a separate can with an equal volume of Mixing Liquid, and part three is a thinner to be used to prevent orange peel.Coverage: One mixed gallon kit (one gallon paint, one gallon Mixing Liquid) yields two gallons of sprayable paint. These two gallons will cover approximately 400 square feet with one coat.Mixing: Combine one part of paint with one volume Mixing Liquid. Let stand for 20 minutes to allow the catalyst to work.Thinning: For most conditions, try using it directly out of the can with no thinning. If orange peel results, thin 5 parts mixedpaint to one part Mark II Thinner.Application: Spray two or three coats one hour apart.Two coats may be sufficient. Allow overnight drying before moving parts. Mark II takes longer to dry than one-part paints. It may be slightly tacky for 24 hours. Shelf Life: Four years in unopened storage.Important Notice: All mixed paints are special order and are non-returnable.\u003c\/p\u003e","brand":"Poly-Fiber","offers":[{"title":"Default Title","offer_id":54255182578006,"sku":"09-03887","price":946.4,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1037\/0164\/3606\/files\/09-03869_98512a63-3eb5-4957-bda6-86fdc6417459.jpg?v=1781867896"},{"product_id":"09-03888","title":"Poly-Fiber Mark II 132 Sun Valley Ivory Quart","description":"\u003cp\u003eMark II for Metal. Not for use on fabric. Note: Do not use Mark II over fabric or on structures that will be covered with fabric cemented with New Super Seam cement or with Polytak cement. New SuperSeam or Polytak may lift Mark II.Use: Mark II for Metal is available in the same 50 colors as Colored Butyrate Dope. Mark II is used over primed metal or composite parts and is too brittle to be used over fabric.Mark II is a tough, long-lasting topcoat paint. Although Mark II is a two-part-catalyzed paint, it is not catalyzed with an isocyanate, thus normal safety equipment (a charcoal filtered spray mask) is sufficient. You do not have to use a supplied air respirator when spraying Mark II.Packaging: Mark II comes in three-part kits: part one is a can of the colored paint; part two is a separate can with an equal volume of Mixing Liquid, and part three is a thinner to be used to prevent orange peel.Coverage: One mixed gallon kit (one gallon paint, one gallon Mixing Liquid) yields two gallons of sprayable paint. These two gallons will cover approximately 400 square feet with one coat.Mixing: Combine one part of paint with one volume Mixing Liquid. Let stand for 20 minutes to allow the catalyst to work.Thinning: For most conditions, try using it directly out of the can with no thinning. If orange peel results, thin 5 parts mixedpaint to one part Mark II Thinner.Application: Spray two or three coats one hour apart.Two coats may be sufficient. Allow overnight drying before moving parts. Mark II takes longer to dry than one-part paints. It may be slightly tacky for 24 hours. Shelf Life: Four years in unopened storage.Important Notice: All mixed paints are special order and are non-returnable.\u003c\/p\u003e","brand":"Poly-Fiber","offers":[{"title":"Default Title","offer_id":54255182643542,"sku":"09-03888","price":303.73,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1037\/0164\/3606\/files\/09-03869_84a18858-a9d0-4c87-a3f9-ea15df01c11b.jpg?v=1781867897"},{"product_id":"09-03889","title":"Poly-Fiber Mark II 132 Sun Valley Ivory Gal","description":"\u003cp\u003eMark II for Metal. Not for use on fabric. Note: Do not use Mark II over fabric or on structures that will be covered with fabric cemented with New Super Seam cement or with Polytak cement. New SuperSeam or Polytak may lift Mark II.Use: Mark II for Metal is available in the same 50 colors as Colored Butyrate Dope. Mark II is used over primed metal or composite parts and is too brittle to be used over fabric.Mark II is a tough, long-lasting topcoat paint. Although Mark II is a two-part-catalyzed paint, it is not catalyzed with an isocyanate, thus normal safety equipment (a charcoal filtered spray mask) is sufficient. You do not have to use a supplied air respirator when spraying Mark II.Packaging: Mark II comes in three-part kits: part one is a can of the colored paint; part two is a separate can with an equal volume of Mixing Liquid, and part three is a thinner to be used to prevent orange peel.Coverage: One mixed gallon kit (one gallon paint, one gallon Mixing Liquid) yields two gallons of sprayable paint. These two gallons will cover approximately 400 square feet with one coat.Mixing: Combine one part of paint with one volume Mixing Liquid. Let stand for 20 minutes to allow the catalyst to work.Thinning: For most conditions, try using it directly out of the can with no thinning. If orange peel results, thin 5 parts mixedpaint to one part Mark II Thinner.Application: Spray two or three coats one hour apart.Two coats may be sufficient. Allow overnight drying before moving parts. Mark II takes longer to dry than one-part paints. It may be slightly tacky for 24 hours. Shelf Life: Four years in unopened storage.Important Notice: All mixed paints are special order and are non-returnable.\u003c\/p\u003e","brand":"Poly-Fiber","offers":[{"title":"Default Title","offer_id":54255182676310,"sku":"09-03889","price":945.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1037\/0164\/3606\/files\/09-03869_b0f3c73f-793c-40ce-b05c-16b93e81f3f7.jpg?v=1781867898"},{"product_id":"09-03890","title":"Poly-Fiber Mark II 136 Lemon Yellow Quart","description":"\u003cp\u003eMark II for Metal. Not for use on fabric. Note: Do not use Mark II over fabric or on structures that will be covered with fabric cemented with New Super Seam cement or with Polytak cement. New SuperSeam or Polytak may lift Mark II.Use: Mark II for Metal is available in the same 50 colors as Colored Butyrate Dope. Mark II is used over primed metal or composite parts and is too brittle to be used over fabric.Mark II is a tough, long-lasting topcoat paint. Although Mark II is a two-part-catalyzed paint, it is not catalyzed with an isocyanate, thus normal safety equipment (a charcoal filtered spray mask) is sufficient. You do not have to use a supplied air respirator when spraying Mark II.Packaging: Mark II comes in three-part kits: part one is a can of the colored paint; part two is a separate can with an equal volume of Mixing Liquid, and part three is a thinner to be used to prevent orange peel.Coverage: One mixed gallon kit (one gallon paint, one gallon Mixing Liquid) yields two gallons of sprayable paint. These two gallons will cover approximately 400 square feet with one coat.Mixing: Combine one part of paint with one volume Mixing Liquid. Let stand for 20 minutes to allow the catalyst to work.Thinning: For most conditions, try using it directly out of the can with no thinning. If orange peel results, thin 5 parts mixedpaint to one part Mark II Thinner.Application: Spray two or three coats one hour apart.Two coats may be sufficient. Allow overnight drying before moving parts. Mark II takes longer to dry than one-part paints. It may be slightly tacky for 24 hours. Shelf Life: Four years in unopened storage.Important Notice: All mixed paints are special order and are non-returnable.\u003c\/p\u003e","brand":"Poly-Fiber","offers":[{"title":"Default Title","offer_id":54255184314710,"sku":"09-03890","price":323.33,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1037\/0164\/3606\/files\/09-03869_0bac325d-4b2e-4306-abbe-b8f26a650972.jpg?v=1781867900"},{"product_id":"09-03891","title":"Poly-Fiber Mark II 136 Lemon Yellow Gal","description":"\u003cp\u003eMark II for Metal. Not for use on fabric. Note: Do not use Mark II over fabric or on structures that will be covered with fabric cemented with New Super Seam cement or with Polytak cement. New SuperSeam or Polytak may lift Mark II.Use: Mark II for Metal is available in the same 50 colors as Colored Butyrate Dope. Mark II is used over primed metal or composite parts and is too brittle to be used over fabric.Mark II is a tough, long-lasting topcoat paint. Although Mark II is a two-part-catalyzed paint, it is not catalyzed with an isocyanate, thus normal safety equipment (a charcoal filtered spray mask) is sufficient. You do not have to use a supplied air respirator when spraying Mark II.Packaging: Mark II comes in three-part kits: part one is a can of the colored paint; part two is a separate can with an equal volume of Mixing Liquid, and part three is a thinner to be used to prevent orange peel.Coverage: One mixed gallon kit (one gallon paint, one gallon Mixing Liquid) yields two gallons of sprayable paint. These two gallons will cover approximately 400 square feet with one coat.Mixing: Combine one part of paint with one volume Mixing Liquid. Let stand for 20 minutes to allow the catalyst to work.Thinning: For most conditions, try using it directly out of the can with no thinning. If orange peel results, thin 5 parts mixedpaint to one part Mark II Thinner.Application: Spray two or three coats one hour apart.Two coats may be sufficient. Allow overnight drying before moving parts. Mark II takes longer to dry than one-part paints. It may be slightly tacky for 24 hours. Shelf Life: Four years in unopened storage.Important Notice: All mixed paints are special order and are non-returnable.\u003c\/p\u003e","brand":"Poly-Fiber","offers":[{"title":"Default Title","offer_id":54255184347478,"sku":"09-03891","price":1022.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1037\/0164\/3606\/files\/09-03869_3de86a6a-0d3a-4ab5-92c7-f00e8e235f0f.jpg?v=1781867901"},{"product_id":"09-03892","title":"Poly-Fiber Mark II 139 Federal Yellow Quart","description":"\u003cp\u003eMark II for Metal. Not for use on fabric. Note: Do not use Mark II over fabric or on structures that will be covered with fabric cemented with New Super Seam cement or with Polytak cement. New SuperSeam or Polytak may lift Mark II.Use: Mark II for Metal is available in the same 50 colors as Colored Butyrate Dope. Mark II is used over primed metal or composite parts and is too brittle to be used over fabric.Mark II is a tough, long-lasting topcoat paint. Although Mark II is a two-part-catalyzed paint, it is not catalyzed with an isocyanate, thus normal safety equipment (a charcoal filtered spray mask) is sufficient. You do not have to use a supplied air respirator when spraying Mark II.Packaging: Mark II comes in three-part kits: part one is a can of the colored paint; part two is a separate can with an equal volume of Mixing Liquid, and part three is a thinner to be used to prevent orange peel.Coverage: One mixed gallon kit (one gallon paint, one gallon Mixing Liquid) yields two gallons of sprayable paint. These two gallons will cover approximately 400 square feet with one coat.Mixing: Combine one part of paint with one volume Mixing Liquid. Let stand for 20 minutes to allow the catalyst to work.Thinning: For most conditions, try using it directly out of the can with no thinning. If orange peel results, thin 5 parts mixedpaint to one part Mark II Thinner.Application: Spray two or three coats one hour apart.Two coats may be sufficient. Allow overnight drying before moving parts. Mark II takes longer to dry than one-part paints. It may be slightly tacky for 24 hours. Shelf Life: Four years in unopened storage.Important Notice: All mixed paints are special order and are non-returnable.\u003c\/p\u003e","brand":"Poly-Fiber","offers":[{"title":"Default Title","offer_id":54255184478550,"sku":"09-03892","price":310.73,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1037\/0164\/3606\/files\/09-03869_24e53d32-eb26-4af6-bf75-6a1eb92a3adc.jpg?v=1781867902"},{"product_id":"09-03893","title":"Poly-Fiber Mark II 139 Federal Yellow Gal","description":"\u003cp\u003eMark II for Metal. Not for use on fabric. Note: Do not use Mark II over fabric or on structures that will be covered with fabric cemented with New Super Seam cement or with Polytak cement. New SuperSeam or Polytak may lift Mark II.Use: Mark II for Metal is available in the same 50 colors as Colored Butyrate Dope. Mark II is used over primed metal or composite parts and is too brittle to be used over fabric.Mark II is a tough, long-lasting topcoat paint. Although Mark II is a two-part-catalyzed paint, it is not catalyzed with an isocyanate, thus normal safety equipment (a charcoal filtered spray mask) is sufficient. You do not have to use a supplied air respirator when spraying Mark II.Packaging: Mark II comes in three-part kits: part one is a can of the colored paint; part two is a separate can with an equal volume of Mixing Liquid, and part three is a thinner to be used to prevent orange peel.Coverage: One mixed gallon kit (one gallon paint, one gallon Mixing Liquid) yields two gallons of sprayable paint. These two gallons will cover approximately 400 square feet with one coat.Mixing: Combine one part of paint with one volume Mixing Liquid. Let stand for 20 minutes to allow the catalyst to work.Thinning: For most conditions, try using it directly out of the can with no thinning. If orange peel results, thin 5 parts mixedpaint to one part Mark II Thinner.Application: Spray two or three coats one hour apart.Two coats may be sufficient. Allow overnight drying before moving parts. Mark II takes longer to dry than one-part paints. It may be slightly tacky for 24 hours. Shelf Life: Four years in unopened storage.Important Notice: All mixed paints are special order and are non-returnable.\u003c\/p\u003e","brand":"Poly-Fiber","offers":[{"title":"Default Title","offer_id":54255184511318,"sku":"09-03893","price":974.4,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1037\/0164\/3606\/files\/09-03869_f3a841b7-c7bb-468d-bf44-8e50264d76c6.jpg?v=1781867903"},{"product_id":"09-03894","title":"Poly-Fiber Mark II 140 Orange Yellow Quart","description":"\u003cp\u003eMark II for Metal. Not for use on fabric. Note: Do not use Mark II over fabric or on structures that will be covered with fabric cemented with New Super Seam cement or with Polytak cement. New SuperSeam or Polytak may lift Mark II.Use: Mark II for Metal is available in the same 50 colors as Colored Butyrate Dope. Mark II is used over primed metal or composite parts and is too brittle to be used over fabric.Mark II is a tough, long-lasting topcoat paint. Although Mark II is a two-part-catalyzed paint, it is not catalyzed with an isocyanate, thus normal safety equipment (a charcoal filtered spray mask) is sufficient. You do not have to use a supplied air respirator when spraying Mark II.Packaging: Mark II comes in three-part kits: part one is a can of the colored paint; part two is a separate can with an equal volume of Mixing Liquid, and part three is a thinner to be used to prevent orange peel.Coverage: One mixed gallon kit (one gallon paint, one gallon Mixing Liquid) yields two gallons of sprayable paint. These two gallons will cover approximately 400 square feet with one coat.Mixing: Combine one part of paint with one volume Mixing Liquid. Let stand for 20 minutes to allow the catalyst to work.Thinning: For most conditions, try using it directly out of the can with no thinning. If orange peel results, thin 5 parts mixedpaint to one part Mark II Thinner.Application: Spray two or three coats one hour apart.Two coats may be sufficient. Allow overnight drying before moving parts. Mark II takes longer to dry than one-part paints. It may be slightly tacky for 24 hours. Shelf Life: Four years in unopened storage.Important Notice: All mixed paints are special order and are non-returnable.\u003c\/p\u003e","brand":"Poly-Fiber","offers":[{"title":"Default Title","offer_id":54255184544086,"sku":"09-03894","price":284.13,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1037\/0164\/3606\/files\/09-03869_9d3b02b2-9bd3-4102-88db-4f6fcba65e08.jpg?v=1781867904"},{"product_id":"09-03895","title":"Poly-Fiber Mark II 140 Orange Yellow Gal","description":"\u003cp\u003eMark II for Metal. Not for use on fabric. Note: Do not use Mark II over fabric or on structures that will be covered with fabric cemented with New Super Seam cement or with Polytak cement. New SuperSeam or Polytak may lift Mark II.Use: Mark II for Metal is available in the same 50 colors as Colored Butyrate Dope. Mark II is used over primed metal or composite parts and is too brittle to be used over fabric.Mark II is a tough, long-lasting topcoat paint. Although Mark II is a two-part-catalyzed paint, it is not catalyzed with an isocyanate, thus normal safety equipment (a charcoal filtered spray mask) is sufficient. You do not have to use a supplied air respirator when spraying Mark II.Packaging: Mark II comes in three-part kits: part one is a can of the colored paint; part two is a separate can with an equal volume of Mixing Liquid, and part three is a thinner to be used to prevent orange peel.Coverage: One mixed gallon kit (one gallon paint, one gallon Mixing Liquid) yields two gallons of sprayable paint. These two gallons will cover approximately 400 square feet with one coat.Mixing: Combine one part of paint with one volume Mixing Liquid. Let stand for 20 minutes to allow the catalyst to work.Thinning: For most conditions, try using it directly out of the can with no thinning. If orange peel results, thin 5 parts mixedpaint to one part Mark II Thinner.Application: Spray two or three coats one hour apart.Two coats may be sufficient. Allow overnight drying before moving parts. Mark II takes longer to dry than one-part paints. It may be slightly tacky for 24 hours. Shelf Life: Four years in unopened storage.Important Notice: All mixed paints are special order and are non-returnable.\u003c\/p\u003e","brand":"Poly-Fiber","offers":[{"title":"Default Title","offer_id":54255184576854,"sku":"09-03895","price":1005.2,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1037\/0164\/3606\/files\/09-03869_428ad886-f918-43a5-bc90-10de6db41910.jpg?v=1781867906"},{"product_id":"09-03896","title":"Poly-Fiber Mark II 142A C. Eagle Yellow\/Orange Quart","description":"\u003cp\u003eMark II for Metal. Not for use on fabric. Note: Do not use Mark II over fabric or on structures that will be covered with fabric cemented with New Super Seam cement or with Polytak cement. New SuperSeam or Polytak may lift Mark II.Use: Mark II for Metal is available in the same 50 colors as Colored Butyrate Dope. Mark II is used over primed metal or composite parts and is too brittle to be used over fabric.Mark II is a tough, long-lasting topcoat paint. Although Mark II is a two-part-catalyzed paint, it is not catalyzed with an isocyanate, thus normal safety equipment (a charcoal filtered spray mask) is sufficient. You do not have to use a supplied air respirator when spraying Mark II.Packaging: Mark II comes in three-part kits: part one is a can of the colored paint; part two is a separate can with an equal volume of Mixing Liquid, and part three is a thinner to be used to prevent orange peel.Coverage: One mixed gallon kit (one gallon paint, one gallon Mixing Liquid) yields two gallons of sprayable paint. These two gallons will cover approximately 400 square feet with one coat.Mixing: Combine one part of paint with one volume Mixing Liquid. Let stand for 20 minutes to allow the catalyst to work.Thinning: For most conditions, try using it directly out of the can with no thinning. If orange peel results, thin 5 parts mixedpaint to one part Mark II Thinner.Application: Spray two or three coats one hour apart.Two coats may be sufficient. Allow overnight drying before moving parts. Mark II takes longer to dry than one-part paints. It may be slightly tacky for 24 hours. Shelf Life: Four years in unopened storage.Important Notice: All mixed paints are special order and are non-returnable.\u003c\/p\u003e","brand":"Poly-Fiber","offers":[{"title":"Default Title","offer_id":54255184675158,"sku":"09-03896","price":313.53,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1037\/0164\/3606\/files\/09-03869_c36a725d-5c0b-46fe-8aa1-9fa562723d53.jpg?v=1781867907"},{"product_id":"09-03897","title":"Poly-Fiber Mark II 142A C. Eagle Yellow\/Orange Gal","description":"\u003cp\u003eMark II for Metal. Not for use on fabric. Note: Do not use Mark II over fabric or on structures that will be covered with fabric cemented with New Super Seam cement or with Polytak cement. New SuperSeam or Polytak may lift Mark II.Use: Mark II for Metal is available in the same 50 colors as Colored Butyrate Dope. Mark II is used over primed metal or composite parts and is too brittle to be used over fabric.Mark II is a tough, long-lasting topcoat paint. Although Mark II is a two-part-catalyzed paint, it is not catalyzed with an isocyanate, thus normal safety equipment (a charcoal filtered spray mask) is sufficient. You do not have to use a supplied air respirator when spraying Mark II.Packaging: Mark II comes in three-part kits: part one is a can of the colored paint; part two is a separate can with an equal volume of Mixing Liquid, and part three is a thinner to be used to prevent orange peel.Coverage: One mixed gallon kit (one gallon paint, one gallon Mixing Liquid) yields two gallons of sprayable paint. These two gallons will cover approximately 400 square feet with one coat.Mixing: Combine one part of paint with one volume Mixing Liquid. Let stand for 20 minutes to allow the catalyst to work.Thinning: For most conditions, try using it directly out of the can with no thinning. If orange peel results, thin 5 parts mixedpaint to one part Mark II Thinner.Application: Spray two or three coats one hour apart.Two coats may be sufficient. Allow overnight drying before moving parts. Mark II takes longer to dry than one-part paints. It may be slightly tacky for 24 hours. Shelf Life: Four years in unopened storage.Important Notice: All mixed paints are special order and are non-returnable.\u003c\/p\u003e","brand":"Poly-Fiber","offers":[{"title":"Default Title","offer_id":54255184806230,"sku":"09-03897","price":982.8,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1037\/0164\/3606\/files\/09-03869_372026d0-2b8e-446a-880b-633a0cfd05c4.jpg?v=1781867908"},{"product_id":"09-03898","title":"Poly-Fiber Mark II 143 Club Yellow Quart","description":"\u003cp\u003eMark II for Metal. Not for use on fabric. Note: Do not use Mark II over fabric or on structures that will be covered with fabric cemented with New Super Seam cement or with Polytak cement. New SuperSeam or Polytak may lift Mark II.Use: Mark II for Metal is available in the same 50 colors as Colored Butyrate Dope. Mark II is used over primed metal or composite parts and is too brittle to be used over fabric.Mark II is a tough, long-lasting topcoat paint. Although Mark II is a two-part-catalyzed paint, it is not catalyzed with an isocyanate, thus normal safety equipment (a charcoal filtered spray mask) is sufficient. You do not have to use a supplied air respirator when spraying Mark II.Packaging: Mark II comes in three-part kits: part one is a can of the colored paint; part two is a separate can with an equal volume of Mixing Liquid, and part three is a thinner to be used to prevent orange peel.Coverage: One mixed gallon kit (one gallon paint, one gallon Mixing Liquid) yields two gallons of sprayable paint. These two gallons will cover approximately 400 square feet with one coat.Mixing: Combine one part of paint with one volume Mixing Liquid. Let stand for 20 minutes to allow the catalyst to work.Thinning: For most conditions, try using it directly out of the can with no thinning. If orange peel results, thin 5 parts mixedpaint to one part Mark II Thinner.Application: Spray two or three coats one hour apart.Two coats may be sufficient. Allow overnight drying before moving parts. Mark II takes longer to dry than one-part paints. It may be slightly tacky for 24 hours. Shelf Life: Four years in unopened storage.Important Notice: All mixed paints are special order and are non-returnable.\u003c\/p\u003e","brand":"Poly-Fiber","offers":[{"title":"Default Title","offer_id":54255184838998,"sku":"09-03898","price":313.53,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1037\/0164\/3606\/files\/09-03869_893b9705-3cba-4c3c-a57e-efaea66b157b.jpg?v=1781867909"},{"product_id":"09-03899","title":"Poly-Fiber Mark II 143 Cub Yellow Gallon","description":"\u003cp\u003eMark II for Metal. Not for use on fabric. Note: Do not use Mark II over fabric or on structures that will be covered with fabric cemented with New Super Seam cement or with Polytak cement. New SuperSeam or Polytak may lift Mark II.Use: Mark II for Metal is available in the same 50 colors as Colored Butyrate Dope. Mark II is used over primed metal or composite parts and is too brittle to be used over fabric.Mark II is a tough, long-lasting topcoat paint. Although Mark II is a two-part-catalyzed paint, it is not catalyzed with an isocyanate, thus normal safety equipment (a charcoal filtered spray mask) is sufficient. You do not have to use a supplied air respirator when spraying Mark II.Packaging: Mark II comes in three-part kits: part one is a can of the colored paint; part two is a separate can with an equal volume of Mixing Liquid, and part three is a thinner to be used to prevent orange peel.Coverage: One mixed gallon kit (one gallon paint, one gallon Mixing Liquid) yields two gallons of sprayable paint. These two gallons will cover approximately 400 square feet with one coat.Mixing: Combine one part of paint with one volume Mixing Liquid. Let stand for 20 minutes to allow the catalyst to work.Thinning: For most conditions, try using it directly out of the can with no thinning. If orange peel results, thin 5 parts mixedpaint to one part Mark II Thinner.Application: Spray two or three coats one hour apart.Two coats may be sufficient. Allow overnight drying before moving parts. Mark II takes longer to dry than one-part paints. It may be slightly tacky for 24 hours. Shelf Life: Four years in unopened storage.Important Notice: All mixed paints are special order and are non-returnable.\u003c\/p\u003e","brand":"Poly-Fiber","offers":[{"title":"Default Title","offer_id":54255184871766,"sku":"09-03899","price":982.8,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1037\/0164\/3606\/files\/09-03869_c429f45e-e7b7-4d2c-a335-366ced74fa4b.jpg?v=1781867911"},{"product_id":"09-03901","title":"Poly-Fiber Mark II 145 Lockhaven Yellow Quart","description":"\u003cp\u003eMark II for Metal. Not for use on fabric. Note: Do not use Mark II over fabric or on structures that will be covered with fabric cemented with New Super Seam cement or with Polytak cement. New SuperSeam or Polytak may lift Mark II.Use: Mark II for Metal is available in the same 50 colors as Colored Butyrate Dope. Mark II is used over primed metal or composite parts and is too brittle to be used over fabric.Mark II is a tough, long-lasting topcoat paint. Although Mark II is a two-part-catalyzed paint, it is not catalyzed with an isocyanate, thus normal safety equipment (a charcoal filtered spray mask) is sufficient. You do not have to use a supplied air respirator when spraying Mark II.Packaging: Mark II comes in three-part kits: part one is a can of the colored paint; part two is a separate can with an equal volume of Mixing Liquid, and part three is a thinner to be used to prevent orange peel.Coverage: One mixed gallon kit (one gallon paint, one gallon Mixing Liquid) yields two gallons of sprayable paint. These two gallons will cover approximately 400 square feet with one coat.Mixing: Combine one part of paint with one volume Mixing Liquid. Let stand for 20 minutes to allow the catalyst to work.Thinning: For most conditions, try using it directly out of the can with no thinning. If orange peel results, thin 5 parts mixedpaint to one part Mark II Thinner.Application: Spray two or three coats one hour apart.Two coats may be sufficient. Allow overnight drying before moving parts. Mark II takes longer to dry than one-part paints. It may be slightly tacky for 24 hours. Shelf Life: Four years in unopened storage.Important Notice: All mixed paints are special order and are non-returnable.\u003c\/p\u003e","brand":"Poly-Fiber","offers":[{"title":"Default Title","offer_id":54255184904534,"sku":"09-03901","price":309.33,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1037\/0164\/3606\/files\/09-03869_508c9ffa-11cf-4f09-904c-73bacdec842c.jpg?v=1781867912"},{"product_id":"09-03902","title":"Poly-Fiber Mark II 145 Lockhaven Yellow Gal","description":"\u003cp\u003eMark II for Metal. Not for use on fabric. Note: Do not use Mark II over fabric or on structures that will be covered with fabric cemented with New Super Seam cement or with Polytak cement. New SuperSeam or Polytak may lift Mark II.Use: Mark II for Metal is available in the same 50 colors as Colored Butyrate Dope. Mark II is used over primed metal or composite parts and is too brittle to be used over fabric.Mark II is a tough, long-lasting topcoat paint. Although Mark II is a two-part-catalyzed paint, it is not catalyzed with an isocyanate, thus normal safety equipment (a charcoal filtered spray mask) is sufficient. You do not have to use a supplied air respirator when spraying Mark II.Packaging: Mark II comes in three-part kits: part one is a can of the colored paint; part two is a separate can with an equal volume of Mixing Liquid, and part three is a thinner to be used to prevent orange peel.Coverage: One mixed gallon kit (one gallon paint, one gallon Mixing Liquid) yields two gallons of sprayable paint. These two gallons will cover approximately 400 square feet with one coat.Mixing: Combine one part of paint with one volume Mixing Liquid. Let stand for 20 minutes to allow the catalyst to work.Thinning: For most conditions, try using it directly out of the can with no thinning. If orange peel results, thin 5 parts mixedpaint to one part Mark II Thinner.Application: Spray two or three coats one hour apart.Two coats may be sufficient. Allow overnight drying before moving parts. Mark II takes longer to dry than one-part paints. It may be slightly tacky for 24 hours. Shelf Life: Four years in unopened storage.Important Notice: All mixed paints are special order and are non-returnable.\u003c\/p\u003e","brand":"Poly-Fiber","offers":[{"title":"Default Title","offer_id":54255185101142,"sku":"09-03902","price":966.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1037\/0164\/3606\/files\/09-03869_f98c83d5-b82a-45e9-a356-26cda240daba.jpg?v=1781867913"},{"product_id":"09-03903","title":"Poly-Fiber Mark II 146 J3 OEM Yellow Quart","description":"\u003cp\u003eMark II for Metal. Not for use on fabric. Note: Do not use Mark II over fabric or on structures that will be covered with fabric cemented with New Super Seam cement or with Polytak cement. New SuperSeam or Polytak may lift Mark II.Use: Mark II for Metal is available in the same 50 colors as Colored Butyrate Dope. Mark II is used over primed metal or composite parts and is too brittle to be used over fabric.Mark II is a tough, long-lasting topcoat paint. Although Mark II is a two-part-catalyzed paint, it is not catalyzed with an isocyanate, thus normal safety equipment (a charcoal filtered spray mask) is sufficient. You do not have to use a supplied air respirator when spraying Mark II.Packaging: Mark II comes in three-part kits: part one is a can of the colored paint; part two is a separate can with an equal volume of Mixing Liquid, and part three is a thinner to be used to prevent orange peel.Coverage: One mixed gallon kit (one gallon paint, one gallon Mixing Liquid) yields two gallons of sprayable paint. These two gallons will cover approximately 400 square feet with one coat.Mixing: Combine one part of paint with one volume Mixing Liquid. Let stand for 20 minutes to allow the catalyst to work.Thinning: For most conditions, try using it directly out of the can with no thinning. If orange peel results, thin 5 parts mixedpaint to one part Mark II Thinner.Application: Spray two or three coats one hour apart.Two coats may be sufficient. Allow overnight drying before moving parts. Mark II takes longer to dry than one-part paints. It may be slightly tacky for 24 hours. Shelf Life: Four years in unopened storage.Important Notice: All mixed paints are special order and are non-returnable.\u003c\/p\u003e","brand":"Poly-Fiber","offers":[{"title":"Default Title","offer_id":54255185592662,"sku":"09-03903","price":313.53,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1037\/0164\/3606\/files\/09-03869_0909da5f-14a9-412a-9aaa-e16777ac05e8.jpg?v=1781867918"},{"product_id":"09-03904","title":"Poly-Fiber Mark II 146 J3 OEM Yellow Gal","description":"\u003cp\u003eMark II for Metal. Not for use on fabric. Note: Do not use Mark II over fabric or on structures that will be covered with fabric cemented with New Super Seam cement or with Polytak cement. New SuperSeam or Polytak may lift Mark II.Use: Mark II for Metal is available in the same 50 colors as Colored Butyrate Dope. Mark II is used over primed metal or composite parts and is too brittle to be used over fabric.Mark II is a tough, long-lasting topcoat paint. Although Mark II is a two-part-catalyzed paint, it is not catalyzed with an isocyanate, thus normal safety equipment (a charcoal filtered spray mask) is sufficient. You do not have to use a supplied air respirator when spraying Mark II.Packaging: Mark II comes in three-part kits: part one is a can of the colored paint; part two is a separate can with an equal volume of Mixing Liquid, and part three is a thinner to be used to prevent orange peel.Coverage: One mixed gallon kit (one gallon paint, one gallon Mixing Liquid) yields two gallons of sprayable paint. These two gallons will cover approximately 400 square feet with one coat.Mixing: Combine one part of paint with one volume Mixing Liquid. Let stand for 20 minutes to allow the catalyst to work.Thinning: For most conditions, try using it directly out of the can with no thinning. If orange peel results, thin 5 parts mixedpaint to one part Mark II Thinner.Application: Spray two or three coats one hour apart.Two coats may be sufficient. Allow overnight drying before moving parts. Mark II takes longer to dry than one-part paints. It may be slightly tacky for 24 hours. Shelf Life: Four years in unopened storage.Important Notice: All mixed paints are special order and are non-returnable.\u003c\/p\u003e","brand":"Poly-Fiber","offers":[{"title":"Default Title","offer_id":54255185920342,"sku":"09-03904","price":982.8,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1037\/0164\/3606\/files\/09-03869_7b285652-2194-4d20-bba0-2e88e484d63b.jpg?v=1781867920"},{"product_id":"09-03905","title":"Poly-Fiber Mark II 151 Everglades Green Quart","description":"\u003cp\u003eMark II for Metal. Not for use on fabric. Note: Do not use Mark II over fabric or on structures that will be covered with fabric cemented with New Super Seam cement or with Polytak cement. New SuperSeam or Polytak may lift Mark II.Use: Mark II for Metal is available in the same 50 colors as Colored Butyrate Dope. Mark II is used over primed metal or composite parts and is too brittle to be used over fabric.Mark II is a tough, long-lasting topcoat paint. Although Mark II is a two-part-catalyzed paint, it is not catalyzed with an isocyanate, thus normal safety equipment (a charcoal filtered spray mask) is sufficient. You do not have to use a supplied air respirator when spraying Mark II.Packaging: Mark II comes in three-part kits: part one is a can of the colored paint; part two is a separate can with an equal volume of Mixing Liquid, and part three is a thinner to be used to prevent orange peel.Coverage: One mixed gallon kit (one gallon paint, one gallon Mixing Liquid) yields two gallons of sprayable paint. These two gallons will cover approximately 400 square feet with one coat.Mixing: Combine one part of paint with one volume Mixing Liquid. Let stand for 20 minutes to allow the catalyst to work.Thinning: For most conditions, try using it directly out of the can with no thinning. If orange peel results, thin 5 parts mixedpaint to one part Mark II Thinner.Application: Spray two or three coats one hour apart.Two coats may be sufficient. Allow overnight drying before moving parts. Mark II takes longer to dry than one-part paints. It may be slightly tacky for 24 hours. Shelf Life: Four years in unopened storage.Important Notice: All mixed paints are special order and are non-returnable.\u003c\/p\u003e","brand":"Poly-Fiber","offers":[{"title":"Default Title","offer_id":54255186215254,"sku":"09-03905","price":319.13,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1037\/0164\/3606\/files\/09-03869_0932d723-9753-48c5-a35e-137e57ebeb46.jpg?v=1781867920"}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1037\/0164\/3606\/collections\/polyfiberlogo.jpg?v=1781650301","url":"https:\/\/www.aircraftpartseurope.com\/collections\/poly-fiber.oembed?page=7","provider":"Aircraft Parts Europe","version":"1.0","type":"link"}