{"product_id":"01-01598","title":"Tr-102 Regular Mold Release Paste 14 Oz","description":"\u003cp\u003eOn new or reconditioned tooling, suggest use of the sealer glaze TR-301 prior to waxing for added release, gloss and mold life. Apply wax with sponge applicator in thin even circular motion to the mold surface. Allow to haze dry (approx. 5-10 min) and polish wipe to gloss finish. For new or reconditioned molds apply a minimum of 6 coats of paste wax, waiting approx. 30-60 minutes between applications for the wax to harden after the polish wipe. Best results obtained if after application mold is allowed to stand overnight and a subsequent final coat of wax release applied following day prior to gel coating. Follow with a coat of wax for the first 2-3 parts released. Then determine how many parts can be effectively produced before re-waxing is required. This will vary depending on molding condition, configuration, resin, mold cycles, effective cure of production gel coat and other factors.Uses:Open mold hand or spray lay upResin Transfer\/injection (RTM) \u0026amp; (RIM)Vacuum bag and compression moldingPolyester \u0026amp; epoxy resinsNOTE: Check suitability when heat curing or higher temperature molding above 185°F (85°C) for the TR-102 \u0026amp; above 210°F (85°C) for the TR-104.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eManufacturer Part #:\u003c\/strong\u003e TR-102\u003c\/p\u003e","brand":"Aircraft Spruce","offers":[{"title":"Default Title","offer_id":54219832066390,"sku":"01-01598","price":34.3,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1037\/0164\/3606\/files\/01-01598.jpg?v=1781651665","url":"https:\/\/www.aircraftpartseurope.com\/products\/01-01598","provider":"Aircraft Parts Europe","version":"1.0","type":"link"}