{"product_id":"07-06716-3","title":"B\u0026C Starter For Continental 12V With Pull Cable Kit - New - BC320-1","description":"\u003cp\u003eThis starter for the Continental 0-200 or 0-240 engine solves all the problems that other starters have had -- worn out clutches, cracked pinion gears, hard to find parts. In addition, the BC320 is 4.3 to 5.2 lbs. lighter depending on whether you are replacing a key-type starter or a pull-cable type starter. BC320 starter is STCd for use in certificated aircraft and is available with, or without, the STC. Also available are 2 installation kits; one for replacing a key-type starter, the other for replacing a pull-cable type starter.If you are replacing a key-type starter, you will need installation kit 07-06752. Before installing the BC320, a needle bearing will need to be removed from your engine. To aid in removing this needle bearing, you may purchase Bearing removal kit, 07-06753 . If you are replacing a pull-cable starter, you will need installation kit 07-06754. Attention: Before installing the BC320, you will need to cut off a steel shaft that is installed in your engine case.The BC320 starter is a complete starter, ready to install, that will replace the existing motor, clutch, and pinion-gear. Tested by Continental with over 5000 start cycles without a problem. Recommended by Rutan Aircraft Factory. Except for paperwork, there are no differences between STCd starters and starters for homebuilts. A starter must be ordered to match your battery voltage.\u003c\/p\u003e","brand":"Aircraft Spruce","offers":[{"title":"Default Title","offer_id":54230635413846,"sku":"07-06716-3","price":2415.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1037\/0164\/3606\/files\/BC320_b9ed24a1-f285-4c2d-86e6-fa716458fc6b.jpg?v=1781776151","url":"https:\/\/www.aircraftpartseurope.com\/products\/07-06716-3","provider":"Aircraft Parts Europe","version":"1.0","type":"link"}